Fallback Image Title

Power meters and voltmeters

Login Register

Top content about Power meters and voltmeters

Audio / Video testing Receivers Signal generators

Conducted Testing of Terrestrial Broadcast Sound Receivers according to ETSI EN 303 345

This application note describes test procedures for terrestrial broadcast sound receivers for conformance with the radio equipment directive of the EU, according ...

Power meters and voltmeters

Transformer Testing With R&S®LCX200 and R&S®LCX-Z5

Transformer Testing With R&S®LCX200 and R&S®LCX-Z5

Power meters and voltmeters Videos

Power meters and voltmeters

Transformer Testing With R&S®LCX200 and R&S®LCX-Z5

Transformer Testing With R&S®LCX200 and R&S®LCX-Z5

Power meters and voltmeters

R&S®LCX-K106 Advanced Analysis Function Sweep Tool

The sweep tool for the R&S®LCX LCR meters allows dynamic impedance measurements by sweeping test signal frequency, level, and DC bias.

Power meters and voltmeters

R&S®LCX100 and R&S®LCX200 Key features

The R&S®LCX LCR Meters come with a high-resolution touchscreen, a maximum frequency of up to 10 MHz, versatile measurement functions, and logging capabilities

Power meters and voltmeters

R&S®LCX-K108 Extended bias functions

The R&S®LCX-K108 option allows the user to apply an external DC voltage bias of up to 10V and an internal DC current bias of up to 200mA to the DUT.

RS-ZNL-VNA-3-NRP-power-measurements_720p_1440x_screen.jpg
Power measurements Power meters and voltmeters Vector network analyzers

How to set up and perform power measurements with the R&S®ZNL and the R&S®NRP

This video demonstrates how to set up a precise power measurement with the R&S®ZNL vector network analyzer together with the R&S®NRP power sensor.

NRQ6-promotionvideo_Screen.jpg
Power measurements Power meters and voltmeters

R&S®NRQ6 Frequency Selective Power Sensor

The R&S®NRQ6: band-limited high-precision, high-speed power measurements beyond the limits of currently available power meters down to -130 dBm.

Power meters and voltmeters Application Cards & Notes

Audio / Video testing Receivers Signal generators

Conducted Testing of Terrestrial Broadcast Sound Receivers according to ETSI EN 303 345

This application note describes test procedures for terrestrial broadcast sound receivers for conformance with the radio equipment directive of the EU, according ...

OTA testing Power meters and voltmeters

Minimize measurement uncertainty for EIRP OTA measurements

Measuring absolute power levels precisely and accurately in over-the-air (OTA) scenarios is challenging. The R&S®NRPM-A90(D) OTA power sensors remove many ...

Pulsed signal measurements Signal analysis Spectrum analyzers

RBW influence on peak or mean power measurement of pulsed signals

This application note provides information on how to perform spectral emission measurements on pulsed signals with spectrum analyzers using RBW filters.

Power measurements Regulatory testing Power meters and voltmeters

Measurement of inrush currents

All electronic devices contain capacitive or inductive components that can cause a disproportionately high current while switching on the device.

Power consumption Power meters and voltmeters Power electronics

Measurement of standby power consumption in line with IEC 62301 and EN 50564

Today virtually every electronic device has a standby mode. Power consumption is regulated in most countries by increasingly stringent limits. This makes ...

T&M for broadcasting Broadcast distribution Broadcast receiver testing

Test of Digital Terrestrial TV Broadcast Receivers according to ETSI EN 303 340

This application note describes the test procedures and provides save-recall files and interferer signals for the Broadcast Test Center R&S®BTC.

SatCom - Ground station Satellite testing Spectrum analyzers

Ground Station Testing On Satellites In Orbit

This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks.

SDR Signal generators Oscilloscopes

T&M solutions for software defined radios (SDR)

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

Component testing Passive components Education

Measurements on RF and AF Filters with Rohde & Schwarz Value Instruments

This application note describes the basic frequency filter measurements that are often required during service repairs, during development and for training ...

Radio base stations Broadcast distribution T&M for broadcasting

Measurements on FM Transmitters for Acceptance, Commissioning and Maintenance

How to performe fundamental FM measurements such as frequency response, balance, stereo crosstalk, total harmonic distortion (THD), dual frequency distortion ...

Power meters and voltmeters End customers Power

Using R&S®NRP-Z Power Sensors with Android Handheld Devices

This application note describes how to connect and use the highly popular R&S®NRP-Z family of USB SMART power sensors with the Android application.

Radio base stations Audio / Video testing RF measurements

DAB Transmitter Measurements for Acceptance, Commissioning and Maintenance

A single instrument, the R&S®ETL TV analyzer, performs all required DAB transmitter measurements, from the initial acceptance testing for the transmitter, to ...