Login or register to gain full access to the Knowledge+ platform!
I want to create an account
I already have an account
With the R&S®Pulse Sequencer radar simulation software, users can easily and intuitively create scenarios for simulation of angle of arrival (AoA).
The figure shows the level variation due to the flight scenario. Only the RF power level trace of one of the receiver’s four sector antennas is shown.
Learn about the importance of phase-coherent measurements in a variety of real-world use cases and presents the relevant test and measurement solutions.
Watch this Rohde & Schwarz webinar and learn more about simulating radar signals for meaningful radar warning receiver tests.
Real-life examples of how to do performance measurements with complex burst and pulse sequences. Phase stability is the key parameter for defining target ...
In this webinar you will learn how to measure stability of pulsed signals and generate multi-port phase coherent radar signals. Watch now.
Explore the concept of Digital RF Memory Jammers. Learn about their technology and the respective Test and Measurement challenges and solutions.
In this webinar you will learn more about solutions for high test speeds and throughput as well as how to cover multiple tests with one set-up.
In operational situations, many emitter signals are present at the same time. Choose R&S to test your equipment with multiple emitter signals.
Simulating moving radar emitters is important in most test cases. Optimize your equipment before final assembly with R&S powerful radar signal simulator.
Airborne, naval or land based platforms must have direction finding capability. Optimize your equipment with R&S long before final assembly.
The R&S®SMW200A vector signal generator together with the R&S®Pulse Sequencer software package is a powerful off the-shelf radar signal simulator.
Choose R&S®SMA100B Signal Generator Benefits: now up to 67 GHz, user friendly, purest signal. Brows through a wide selection of R&S signal generators
Up and down Chirp analysis in time and frequency domain
Discover the easy-to-use test solution for high speed multichannel acquisition for 5G NR signals from Rohde & Schwarz.
The R&S®RTO and R&S®RTP oscilloscopes are capable of triggering precisely on a pulse as a prerequisite for time domain and frequency domain analysis.
This document describes the use of the R&S®RTO and R&S®RTP to demodulate RF pulses for further measurements and precisely trigger on and analyze RF pulses.
The R&S®Pulse Sequencer software together with the R&S®SMW200A vector signal generator offers a simple and easy way to simulate multi-emitter environments.
The R&S®Pulse Sequencer software offers an easy way to simulate moving radar emitters and a moving receiver for EW receiver tests.The software together with ...
This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required ...
The R&S®Pulse Sequencer software automatically uploads the interpreted PDW lists on the R&S®SMW200A to generate the most agile radar signals.
Measurement Setup for Phase Noise Test at Frequencies above 50 GHz with two external harmonic mixers in combination with a commercially available phase noise ...
The R&S®RTO digital oscilloscope analyzes RF pulses up to the maximum bandwidth of the instrument used.
The R&S®SMW200A vector signal generator is a powerful and flexible signal generation source for realistic and agile radar scenarios in highly integrated radar ...
The R&S®Pulse Sequencer software offers a powerful mechanism to model sequences that are often required for meaningful radar receiver test cases. The ...
