Signal generators

R&S®SMBV100B Vector Signal Generator User Manual

This manual describes the R&S®SMBV100B functions, including its hardware options.

It covers the following topics:

  • Instructions on how to use and setup up the R&S®SMBV100B (Getting Started)
  • Configuring the Internal Baseband Source, including ARB, MCCW, etc.
  • Adding Noise (AWGN) and Impairing the Signal
  • Applying I/Q Vector Modulation
  • Configuring the RF Signal
  • Monitoring the Signal Characteristics
  • File and Data Management
  • General Instrument Functions
  • Network and Remote Control Operation
  • Remote Control Commands Description
  • Maintenance
  • Troubleshooting and Error Messages

Tip: The online version is meant for immediate display (no download required).

See also:

Name
Type
Version
Date
Size
R&S®SMBV100B User Manual (download version)
Type
User Manual
Version
05 (FW: 4.70.006.xx)
Date
13-Dec-2019
Size
22 MB
R&S®SMBV100B User Manual (online version)
Type
User Manual
Version
05 (FW: 4.70.006.xx)
Date
13-Dec-2019
Size
65 MB