6247C/6247G DC Voltage/Current Source/Monitor

ADCMT

NOT distributed in North America & Asia

Key Facts

  • -15 V to +250 V / 0 to ±320 mA
  • DC and pulsed operation
  • Best for testing high-voltage LED luminaires
  • GPIB/USB (6247G) or RS232/USB (6247C) interface

Brief Description

The 6247C/6247G is a DC voltage current source/monitor designed for evaluating high-voltage semiconductors and LED luminaries that demand high efficiency and low power consumption.

Specifications

Voltage Source/Measurement Range
Range Source Range
5 V -1.0000 to +5.0000 V
50 V -10.000 to +50.000 V

Key Facts

  • -15 V to +250 V / 0 to ±320 mA
  • DC and pulsed operation
  • Best for testing high-voltage LED luminaires
  • GPIB/USB (6247G) or RS232/USB (6247C) interface

Brief Description

The 6247C/6247G is a DC voltage current source/monitor designed for evaluating high-voltage semiconductors and LED luminaries that demand high efficiency and low power consumption. It is capable of outputting voltage up to +250 V and current up to ±320 mA and features high source (100 µV/100 pA) and measurement (10 µV/10 pA) resolution. The 6247C/6247G is equipped with various types of sweep and measurement functions. It offers synchronous operation with multiple units and other instruments, making it ideal for use in electronic component test systems.

Specifications

Voltage Source/Measurement Range
Range Source Range Setting Resolution Measurement Range Measurement Resolution
5 V -1.0000 to +5.0000 V 100 μV -1.00999 to +5.00999 V 10 μV
50 V -10.000 to +50.000 V 1m V -10.0999 to +50.0999 V 100 μV
250 V -15.00 to +250.00 V 10m V -15.099 to +250.999 V 1m V
Current Source/Measurement Range
Range Source Range Setting Resolution Measurement Range Measurement Resolution
3 μA 0 to ±3.2000 μA 100 pA 0 to ±3.20999 μA 10 pA
30 μA 0 to ±32.000 μA 1 nA 0 to ±32.0999 μA 100 pA
300 μA 0 to ±320.00 μA 10 nA 0 to ±320.999 μA 1 nA
3 mA 0 to ±3.2000 mA 100 nA 0 to ±3.20999 mA 10 nA
30 mA 0 to ±32.000 mA 1 μA 0 to ±32.0999 mA 100 nA
300 mA 0 to ±320.00 mA 10 μA 0 to ±320.999 mA 1 μA
Resistance Measurement Range
Range Measurement Range Measurement Resolution
Determined by voltage range/current range calculations 0 Ω to 125 GΩ Minimum 30 µΩ
Output Noise
For voltage source, within the range from no load to the maximum load [Vp-p] For current source, at the following load [Ap-p]
Range Load resistance Low Frequency Noise High Frequency Noise
DC to 100 Hz DC to 10 kHz DC to 20 MHz
5 V - 200 μV 400 μV 10 mV
50 V - 300 μV 1 mV 10 mV
250 V - 500 µV 5 mV 10 mV
Source and measurement function
DC source and measurement
Source and measurement of DC voltage and current
Pulse source and measurement
Source and measurement of pulse voltage and current (However, measurement auto range in pulse source is impossible)
DC sweep source and measurement
Source and measurement by Linear, Two slope linear, Random and Fixed levels
Pulse sweep source and measurement
Source and measurement by Linear, Two slope linear, Random and Fixed levels(However, measurement auto range in pulse source is impossible)
Integration Time
9 types available: 100 μs, 500 μs, 1 ms, 5 ms, 10 ms, 1PLC, 100 ms, 200 ms and S/H
S/H: Sample hold (integration time: 100 μs) measurement (Enabled only in the pulse source and pulse sweep source modes.)
(PLC: Power Line Cycle 50 Hz: 20 ms, 60 Hz: 16.66 ms)
Sweep Mode Reverse ON (round) / OFF (one way)
Sweep repeat count: 1 to 1000 times or infinite
Maximum number of sweep steps 8000 steps
Random Sweep Maximum Memory 8000 data
Measurement data memory 8000 data
Measurement Auto Range Available only in VSIM or ISVM
Measurement Function Link Mode Links the source function to the measurement function (VSIM or ISVM)
ON/OFF available
Limiter
The HI and LO limiters can be set individually. (However, current limiters of the same polarity are not allowed.)
Calculation Functions NULL calculation
Comparator calculation (HI/GO/LO)
Scaling calculation
MAX/MIN/AVE/TOTAL calculation
Trigger Style Auto-Trigger, external Trigger
Output Terminal Front; Safety sockets,
HI OUTPUT, HI SENSE, LO OUTPUT, LO SENSE
Maximum input
+250 V/-15 V peak Max (between HI-LO)
2 V peak Max (between OUTPUT and SENSE)
250 V Max (between LO and chassis)
Maximum Remote Sensing Voltage ± 1 V MAX
HI OUTPUT - HI SENSE,
LO OUTPUT - LO SENSE
(The voltage between HI SENSE and LO SENSE must be within the maximum output voltage range)
Voltage measurement input resistance 10 GΩ or higher
Voltage measurement input leak current ±100 pA or lower
Interface Function
GPIB (6247G only)
Compliant with IEEE-488.2-1987
Interface function; SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
Connector; Amphenol 24 pin
RS-232 (6247C only)
Compliant with EIA232C (RS-232)
Baud rate; 19200, 9600, 4800, 2400, 1200, 600, 300
Parity; even, odd and none
Number of data bits; 7 bits, 8 bits
Number of stop bits; 1 bit, 2 bits
Connector; Dsub 9 pin
USB interface USB 2.0 Full-speed
Connector; Type B
External control signal TRIGGER IN, INTERLOCK, OPERATE IN, OPERATE OUT,SYNC OUT Connector; BNC
General Specification
Operating environment: Ambient temperature: 0 ºC to +50 ºC
Relative humidity: 85% or less, no condensation
Storage environment: Ambient temperature: -25 °C to +70 °C
Relative humidity: 85% or less, no condensation
Display: 60 minutes or more
Power supply: AC power supply 100 V/120 V/220 V/240 V (User selectable)
Option number Standard OPT. 32 OPT. 42 OPT. 44
Power voltage 100 V 120 V 220 V 240 V
Specify the option when ordering.
Use a power cable and a fuse that are compliant with the safety standard when changing the power supply voltage.
Power consumption: Approx. 212 (W) x 88 (H) x 450 (D) mm
Mass: 7.3 kg or less
Safety: Compliant with IEC61010-1 Ed.3
EMI: EN61326-1 class A
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Get a Quote

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid email address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.
Please enter your phone number.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Get a Demo

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid email address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Request information

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid email address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Feedback
Get in touch with Rohde & Schwarz!
Please tell us which topic.

Please enter your inquiry.
Contact information

Please enter your first name.

Please enter a valid email address.

Please enter your name.
Security Response Code
show captcha

The input was not correct.
Do not enter data in this field
*Mandatory Field
International Website