R&S®HMC804x DC power supply series

A basic power supply from R&S Essentials

R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply series
Open Lightbox
R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, side view R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, side view R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, side view

Key facts

  • Clear display of all measured parameters
  • Galvanically isolated, floating and short-circuit proof outputs
  • Protective functions can be adjusted for each channel
  • Ideal power supply for hardware developers and labs
  • Intuitive, price-transparent online product configurator

Starting at USD 1,440

Compact and easy to use

R&S®HMC804x DC power supplies are very energy efficient, helping them remain cool and quiet, even at maximum load. Practical interfaces and connectors make work quick and convenient while comfort functions are available for special application cases. One, two, or three channels – a wide range of functions and fundamental specifications make R&S®HMC804x DC power supplies ideal for:
-Development labs
-Industrial environments
-Manufacturing
-Education
You can now use the new online configurator to quickly design the R&S®HMC804x DC power supply you need with full price transparency. Get your request processed in no time by the authorized distribution partner of your choice.

Features & benefits

Flexible channel configuration

All channels are galvanically isolated and can be combined to drive balanced  circuits or for higher voltages/currents.
Front panel: 4 mm safety sockets (R&S®HMC8041 including SENSE)
Rear panel: WAGO cage clamp for all channels including SENSE Convenient parallel and serial operation

Clear display of all measured parameters

The brilliant QVGA color display (320 x 240 pixel) shows real-time voltage, current and power with high resolution settings and readback of 1 mV and 0.1 mA/1.0 mA (depending on current and model). Low residual ripple from linear postregulation and high energy efficiency give it low heat dissipation and a quiet fan.

Flexible overcurrent protection

FuseLink allows you to freely combine the electronic fuses in each channel. Fuse delays help prevent early switching off due to short current spikes. Overcurrent/overvoltage protection can be set for each channel individually. The electronic fuses can be linked to other channels. Here, the channel that exceeds the maximum current level and all linked channels are switched off. Delay times can also be set to prevent premature switching off because of short current spikes.

Programmable sequences

Arbitrary waveforms can be generated for voltage and current. Functions can be configured and executed via the control panel or external interface.

EasyRamp function

Sometimes test sequences need to avoid spikes in supply voltage. The EasyRamp function can run a linear startup curve within a defined time span.

Remote control

Remote control via USB and LAN. R&S®HMC804x-G models also have an IEEE-488 (GPIB) interface.

Easy to use, price transparent configurator

We let customers choose the right T&M instrument quickly, easily, and with full price transparency. The R&S®HMC804x and other instruments in the R&S®Essentials portfolio can now be configured online with the following benefits:
- User-friendly and easy to navigate configurator
- Full cost transparency at every configuration step
- Fast order processing through authorized distribution partners 
- Next-day delivery from selected partners

Available models

Available models
Models
Number of output channels
Max. output power
Output voltage per channel
Output current per channel
Starting at

R&S®HMC8041

Order number 3593.1006.02

Number of output channels
1
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
10 A
Starting at
USD 1,440

R&S®HMC8041-G

Order number 3593.1012.02

Number of output channels
1
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
10 A
Starting at
USD 1,800

R&S®HMC8042

Order number 3593.1029.02

Number of output channels
2
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
5 A
Starting at
USD 1,600

R&S®HMC8042-G

Order number 3593.1035.02

Number of output channels
2
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
5 A
Starting at
USD 1,960

R&S®HMC8043

Order number 3593.1041.02

Number of output channels
3
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
3 A
Starting at
USD 1,790

R&S®HMC8043-G

Order number 3593.1058.02

Number of output channels
3
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
3 A
Starting at
USD 2,130
Specifications
Electrical specifications
Number of output channels 1/2/3
Total output power max. 100 W
Maximum output power per channel 100 W/50 W/33 W
Output voltage per channel 0 V to 32 V
Maximum output current per channel 10 A/5 A/3 A
Voltage ripple and noise (20 Hz to 20 MHz) R&S®HMC8041: < 1 mV (RMS)
R&S®HMC8042/43: < 450 µV (RMS)
Current ripple and noise (20 Hz to 20 MHz) R&S®HMC8041: < 1.5 mA (RMS) (meas.)
R&S®HMC8042/43: < 1 mA (RMS) (meas.)
Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage) < 1 ms (meas.)
Programming resolution voltage 1 mV
Programming resolution current < 1 A: 0.1 mA (R&S®HMC8041: 0.5 mA)
≥ 1 A: 1 mA
Output measurements
Readback resolution voltage 1 mV
Readback resolution current < 1 A: 0.1 mA (R&S®HMC8041: 0.5 mA)
 ≥ 1 A: 1 mA
Readback accuracy voltage ±(% of output + offset) < 0.05 % + 2 mV
Readback accuracy current ±(% of output + offset) typ. < 0.05 % + 4 mA (R&S®HMC8041: typ. < 0.15 % + 10 mA)
Special functions
Measurement functions voltage, current, power, energy
Protection functions OVP, OCP, OPP, OTP
FuseLink function
Fuse delay at output-on
Sense function
Sink mode -
Output sequencing
Trigger input/output
Arbitrary function ● (EasyArb)
Analog/modulation interface
Data logging
Display and interfaces
Display 3.5" QVGA
Rear panel connections Connector block with 4 lines per channel
Remote control interfaces: standard USB, LAN; R&S®HMC804x-G models with IEEE-488 (GPIB)
Remote control interfaces: optional
General data
Dimensions (W × H × D) 222 mm × 97 mm × 291 mm
Weight 2.6 kg
Rack installation R&S®HZC95 option

Available options

General accessories
Product
Description
R&S®HZ10B

Order number 3594.6301.02

Description

Silicon Test Lead

banana to banana, 1 m (set of 5, blue)

R&S®HZ10R

Order number 3594.3860.02

Description

Silicon Test Lead

banana to banana, 1 m (set of 5, red)

R&S®HZ10S

Order number 3594.3877.02

Description

Silicon Test Lead

banana to banana, 1 m (set of 5, black)

R&S®HZC95

Order number 5800.2054.02

Description

19" rack adapter, 2HU, for R&S®NGE100B/NGC100/NPA and R&S®HMC series

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.