R&S®SMBV100A Vector Signal Generator

Generating signals for today and tomorrow

Key Facts

  • Support of 3GPP LTE FDD and TDD, LTE-Advanced, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, and all other important digital standards
  • Fully fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS

Brief Description

The R&S®SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S®SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g. LTE, LTE-Advanced, IEEE802.11ac, GNSS).

Specifications

R&S®SMBV100A
Frequency range 9 kHz to 3.2/6 GHz
Level range -145 dBm to +18 dBm

Key Facts

  • Frequency options from 9 kHz to 3.2 GHz/6 GHz
  • Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
  • Optional ARB-only baseband generators as cost-saving alternatives
  • Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX and all other important digital standards
  • Fully fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS
  • Special package for cost efficient GNSS Production Tester
  • RF bandwidth of up to 160 MHz with internal baseband generator
  • I/Q modulator with 528 MHz RF bandwidth
  • Optimized for high production throughput
  • Prepared for aerospace and defense applications
  • Low cost of ownership due to simple service concept

Brief Description

The R&S®SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S®SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.

Specifications

Frequency
Range R&S®SMBV-B103  
  CW mode 9 kHz to 3.2 GHz
  I/Q mode 1 MHz to 3.2 GHz
  R&S®SMBV-B106  
  CW mode 9 kHz to 6 GHz
  I/Q mode 1 MHz to 6 GHz
Setting time SCPI mode, ALC state ON, CW mode <3 ms
  SCPI mode, ALC state ON, I/Q mode <5 ms
  SCPI mode, ALC state Table <2.5 ms
  SCPI mode, ALC state S&H <7 ms
  List mode <1 ms
Level
Maximum output power 1 MHz < f = 6 GHz >+18 dBm (PEP)
Absolute level error 200 kHz < f = 3 GHz <0.5 dB
Additional level error with ALC OFF, S&H This mode is used with I/Q modulation and pulse modulation. <0.25 dB
Output impedance VSWR in 50 Ω system 200 kHz < f = 6 GHz <1.8
Setting time SCPI mode, ALC state ON, CW mode <2.5 ms
  SCPI mode, ALC state ON, I/Q mode <5 ms
  SCPI mode, ALC state Table <2.5 ms
  SCPI mode, ALC state S&H <7 ms
  List mode <1 ms
Reverse power 1 MHz < f = 1 GHz 50 W
  1 GHz < f = 2 GHz 25 W
  2 GHz < f = 6 GHz 10 W
Spectral purity
Harmonics f > 1 MHz; CW, level = 8 dBm <–30 dBc
Nonharmonics CW, level > –10 dBm, >10 kHz carrier offset, f = 1500 MHz <–70 dBc
(<–84 dBc typ.)
SSB phase noise 20 kHz carrier offset, 1 Hz measurement bandwidth, CW  
  f = 100 MHz <–141 dBc
(–147 dBc typ.)
  f = 1 GHz <–122 dBc
(–127 dBc typ.)
  f = 6 GHz <–106 dBc
(–112 dBc typ.)
Wideband noise attenuator mode AUTO for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW <–142 dBc
Supported analog modulation modes
Amplitude modulation   standard
Frequency/phase modulation   standard
Maximum FM deviation f > 3 GHz 16 MHz
Maximum φM f > 3 GHz 160 rad
Pulse modulation   optional,
with R&S®SMBV-K22
On/off ratio   >80 dB
Rise/fall time 10 % to 90 % of RF amplitude <20 ns, 4 ns (typ.)
Minimum pulse width using the optional
R&S®SMBV-K23 pulse generator
10 ns
I/Q modulation
Supported systems
(with additional options)
R&S®SMBV-B10 baseband generator required GSM/EDGE/EDGE evolution, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/ LTE, WiMAX IEEE 802.16-2004, Cor1-2005, 802.16e-2005 and 802.16Rev2/D3 , WLAN IEEE 802.11a/b/g/n/ac, NFC A/B/F, Bluetooth®, GPS, Glonass, Galileo, HD Radio™3), XM Radio, Sirius Radio, FM Stereo / RDS, DAB / T-DMB, DVB-H/DVB-T, Tetra Release 2, multicarrier CW
Realtime custom digital modulation R&S®SMBV-B10 baseband generator required ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, p/2-DBPSK, p/4-DQPSK, p/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM
I/Q modulator bandwidth internal 60 MHz, 120 MHz or 160 MHz, depending on baseband option
  external >500 MHz
Maximum waveform length 32 Msample
  with R&S®SMBV-K511 option 256 Msample
  with R&S®SMBV-K512 option 1 Gsample
DAC resolution    
ACLR WCDMA 3GPP FDD, TM 1/64 69 dBc (typ.)
EVM WCDMA 3GPP FDD, TM 1/64 0.4 % (meas.)
  WLAN IEEE 802.11 ac, 160 MHz 0.44 % (meas.)
  EUTRA/LTE 0.4 % (meas.)
Connectivity
Remote control   IEC/IEEE, Ethernet (LAN), USB
Peripherals   USB 2.0

2) PEP = peak envelope power.

3) HD RadioTM is a proprietary trademark of iBiquity Digital Corp.

Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Get a Quote

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid e-mail address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.
Please enter your phone number.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Get a Demo

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid e-mail address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Request Information

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid e-mail address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Feedback
Tell us your opinion
Please tell us which topic.

Please enter your inquiry.
Contact information

Please enter your first name.

Please enter a valid e-mail address.

Please enter your name.
Security Response Code
show captcha

The input was not correct.
*Mandatory Field
International Website