1. Home
  2. Test & Measurement
  3. Oscilloscopes
  4. Software
  5. 100BASE-T1/BroadR-Reach® serial triggering and decoding

100BASE-T1/BroadR-Reach®

Oscilloscope software

100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding 100Base-T1 Serial Triggering and Decoding 100Base-T1 Serial Triggering and Decoding 100Base-T1 Serial Triggering and Decoding

Key facts

  • On-screen serial decoding is time-correlated with the serial data waveform
  • Display of all decoded Ethernet packets as color-coded bus signals as well as in tabular format
  • Trigger on frame start, Idle frame, MAC frame including destination and source address, frame type, data and on various error conditions
  • Powerful search and navigate capability for idle and MAC frames, MAC destination and source addresses, frame type, data and error conditions
  • Supports decoding of up to 4 serial buses from analog or digital channel signals
  • R&S oscilloscopes | Engineered for multi-domain challenges

Brief description

The R&S®RTO oscilloscope supports serial triggering and decoding of 100BASE-T1 buses. You can set up decoding in seconds. For detailed analysis, results can be viewed as color-coded telegrams and/or in a table. Errors are identified reliably and efficently using the hardware-accelerated trigger. You can trigger on frame start, idle frame, MAC frame, frame type and data and various error conditions.

Features & benefits

Fast bus setup

Bus setup in seconds with the app cockpit

Starting from the app cockpit, it only takes a few steps to configure any given protocol. Once the bus to decode has been chosen, the connected channels selected and the correct levels set, decoding begins automatically.

Open Lightbox

Bus decoding selection with the app cockpit

Simultaneous decoding of both 100BASE-T1 data streams

Best fixture: R&S®RT-ZF5

The R&S®RT-ZF5 fixture allows you to decode both 100BASE-T1 data streams at the same time. You can compensate the directivity of the fixture to obtain accurate decoding results.

Open Lightbox

Decoded frames are color-coded

Decode all important decode layers

Decoding on ternary signals, scrambled, descrambled or reversed bits

You can analyze the decoded bus on different decode layers. Most important is the ternary signals to directly correlate the decoding to the electrical signal. For further analysis, you can additionally show the scrambled and descrambled bits.

Open Lightbox

Decoded frames are color-coded

Color-coded telegram display

Telegram display as color-coded bus signals and in decode table

You can analyze the decoded bus frames by overlaying the signal with color-coded data. Address and data content can be displayed in hex, bin or ASCII format. You always have the best overview with the flexible screen setup. The protocol details can also be displayed in a concise table. Select the data format and decode layer that best fits your analysis needs.

Open Lightbox

Decoded frames are color-coded

Strong trigger capability

Strong trigger capability on frame start, idle frame, MAC frame and addresses, frame type and data and various error conditions.

The protocol-specific trigger lets you reliably isolate protocol events and errors. Thanks to high acquisition rates, Rohde & Schwarz oscilloscopes are ideal for finding errors quickly, allowing decoding of protocol-specific trigger results. The hardware-based triggering is available on specific protocol content, e.g. addresses, data and protocol errors.

 

Open Lightbox

Protocol trigger setup dialog

Search and navigate in recorded acquisitions

Powerful search and navigate capability

Comprehensive search functions simplify the analysis of long signal sequences. You can search for waveforms based on different criteria, such as signal faults or protocol content. All detected events are shown in a table with timestamps. The individual events can be examined in a zoom window with simple navigation between events.

Open Lightbox

Powerful searching, even in long recordings

Available models


  • Option Name

    R&S®RTO-K57

    Order number: 1333.0596.02

    Serial Standard
    100Base-T1
    Decode Table
    Trigger
    Label Support
    Base unit
    R&S®RTO2000
  • Option Name

    R&S®RTE-K57

    Order number: 1333.0615.02

    Serial Standard
    100Base-T1
    Decode Table
    Trigger
    Label Support
    Base unit
    R&S®RTE1000

More information

Oscilloscope portfolio

Request information

Any questions left? You need additional information? Just use this form and we will immediately get back to you.

Thank you.

Your Rohde & Schwarz-Team

Leider ist bei der Übermittlung der Daten ein Fehler aufgetreten. Bitte versuchen Sie es zu einem späteren Zeitpunkt erneut.

Ihr Rohde & Schwarz-Team