R&S®ZVA-Zxxx millimeterwave converters

Network analysis up to 110 GHz

R&S®ZVA-Zxxx millimeterwave converters
Open Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Open Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Open Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Open Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Open Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Open Lightbox
R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Side view R&S®ZVA-Zxxx millimeterwave converters, Back view R&S®ZVA-Zxxx millimeterwave converters, Application Image R&S®ZVA-Zxxx millimeterwave converters, 3D

Key facts

  • Variable output power
  • Electronic power control
  • Automatic parameter setting
  • Convenient handling
  • Multiport and true differential measurements

Millimeterwave measurements in E and W bands

The R&S®ZVA-Zxx millimeter-wave converters can make millimeterwave measurements in the E and W band from 60 to 90GHz and 75 to 110GHz. Rohde & Schwarz converters have a wide dynamic range, are very convenient to operate and enable fast measurements. When combined with the R&S®ZVA, two-port measurements can be performed with a four-port network analyzer and two converters; with no need for an external generator. A two-port network analyzer requires an external generator for LO signals. The R&S®ZNA can have up to four converters connected with no external signal generator.

Features & benefits

Frequency range

  • 60 GHz to 90 GHz (R&S®ZVA-Z90)
  • 75 GHz to 110 GHz (R&S®ZVA-Z110/R&S®ZVA-Z110E)
  • using an R&S®ZVA24/40/50/67 or an R&S®ZNA26/43/50/67 network analyzer

Wide dynamic range

  • R&S®ZVA-Z90: > 100 dB, typ. 115 dB
  • R&S®ZVA-Z110: > 100 dB, typ. 110 dB
  • R&S®ZVA-Z110E: > 95 dB, typ. 110 dB

Variable and electronic output power

typ. +10 dBm (R&S®ZVA-Z90)
typ. +10 dBm (R&S®ZVA-Z110)
typ. up to +2 dBm (R&S®ZVA-110E)
A control screw can reduce power by 40 dB (R&S®ZVA-Z110). The output power can be electronically reduced by 25 dB with the R&S®ZVA-Z110E. The R&S®ZVA-Z110 can reduce it by 70 dB with RF input power variation.

Automatic parameter setting

R&S®ZVA and R&S®ZNA firmware runs the converters with the R&S®ZVA-K8/R&S®ZNA-K8 converter control option. The network analyzer will automatically set the correct parameters based on the selected converter type. The network analyzer also protects converters by limiting output power to the converter coaxial inputs. For each converter band an appropriate calibration is available.

Convenient handling

The converter waveguide connectors are arranged on a bar extending from the converter for convenient usage. The screwed flange joints are easily accessible for calibration and connecting the DUT. The converters can have three or four height-adjustable feet. Three feet make it much easier to align the test port flange. The converters have no fans – a big advantage in particle-sensitive environments.

Multiport and true differential measurements

Multiport devices such as couplers can be analyzed with three or four converters. The setup can use an R&S®ZVA24, R&S®ZVA40, R&S®ZVA50 or R&S®ZVA67 plus an external generator and one converter per test port. The R&S®ZNA26, R&S®ZNA43, R&S®ZNA50 or R&S®ZNA67 enable up to four converters, which can be connected without needing an external signal generator. The R&S®ZVA-Z90/R&S®ZVA-Z110 and the R&S®ZVA-Z110E are ideal for generating true differential signals (true differential mode).

Pulsed measurements

The converters can also be operated in pulsed mode − to characterize pulsed amplifiers. This applies to both measurements versus frequency (average pulse and point-in-pulse) and pulse profile measurements.

Available models

Available models
Models
Upper frequency
Test port
Output power (typ.)

R&S®ZVA-Z90

Order number 1322.3024.02

Upper frequency
90 GHz
Test port
WR12
Output power (typ.)
+10 dBm

R&S®ZVA-Z110

Order number 1307.7000.02

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
+10 dBm

R&S®ZVA-Z110E

Order number 1307.7000.40

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-7 dBm

R&S®ZVA-Z110E

Order number 1307.7000.50

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-1 dBm

Available options

Waveguide calibration kits
Product
Description

Order number 1307.7700.10

Description

Waveguide calibration kit WR12, 60 GHz to 90 GHz (without sliding match)

Order number 1307.7700.11

Description

Waveguide calibration kit WR12, 60 GHz to 90 GHz (with sliding match)

Order number 1307.7100.10

Description

Waveguide calibration kit WR10, 75 GHz to 110 GHz (without sliding match)

Order number 1307.7100.11

Description

Waveguide calibration kit WR10, 75 GHz to 110 GHz (with sliding match)

General analysis
Product
Description

Order number 1332.5388.02

Description

Converter Control Software

(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)

Order number 1307.7022.02

Description

Freq. Converter Control

(for R&S®ZVA24/40/50/67)

General accessories
Product
Description
R&S®ZV-Z1118

Order number 1314.5373.00

Description

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®ZV-Z1218

Order number 1314.5380.00

Description

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1227

Order number 1307.0886.02

Description

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZVAB-B44

Order number 1302.5544.02

Description

USB-to-IEC/IEEE adapter

(for control of external devices via IEC/IEEE bus)

R&S®ZCAK

Order number 1323.7746.24

Description

Adapter kit

including a power divider and two right angle SMA (m/m) adapters (required if R&S®ZVA24 var. 28 or R&S®ZVA40 var. 48 (VNAs with four sources) is used)

R&S®ZCAK

Order number 1323.7746.50

Description

Adapter kit

including four 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA50 is used)

R&S®ZCAK

Order number 1323.7746.67

Description

Adapter kit

including a power divider, two right angle SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA67 is used)

Wrenches
Product
Description
R&S®ZV-Z1000

Order number 1314.5467.02

Description

Torque wrench for waveguide flange screws

R&S®ZCAW

Order number 1175.1960.00

Description

Angled wrench for waveguide flange screws

R&S®ZCTW

Order number 1175.2014.02

Description

Torque wrench for waveguide flange screws

R&S®ZCTW

Order number 1175.2014.03

Description

Torque wrench for waveguide flange screws

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.