R&S®CMP180 radio communication tester

Enhanced frequency and bandwidth for advanced wireless technologies

R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester, Front Low R&S®CMP180 Radio Communication Tester, Side view R&S®CMP180 Radio Communication Tester, Front High R&S®CMP180 Radio Communication Tester, Back high R&S®CMP180 Radio Communication Tester, Side view

Key facts

  • Frequency up to 8 GHz and bandwidth up to 500 MHz
  • Up to two independent RF channels (2x VSA / 2x VSG)
  • Increased number of RF ports (2x8)
  • Self-alignment for accuracy adjustment at any time
  • Compact design of 2 HU and 19″

The future integrated

The R&S®CMP180 radio communication tester is a future-proof, non-signaling testing solution for wireless devices in research and development, validation and production. Together with advanced frequency, bandwidth and RF capabilities, it enables testing of new wireless technologies such as Wi-Fi 6E, Wi-Fi 7, 5G NR FR1 and many more. Additionally, the doubled number of analyzers (2xVSA), generators (2xVSG) and RF ports (2x8) enable simultaneous measurements of technologies and devices in a VSA/VSG single-box tester. The R&S®CMPflexx system can have four analyzers (4x VSA), four generators (4x VSG) and four times eight RF ports (4x8).

Features & benefits

Excellent RF parameters

Enables Wi-Fi 6E (WLAN 802.11ax) / Wi-Fi 7 (WLAN 802.11be) & 5G FR1 testing

The R&S®CMP180 enables Wi-Fi 6E (WLAN 802.11ax) / Wi-Fi 7 (WLAN 802.11be) & 5G FR1 measurements with a frequency range up to 8 GHz and a bandwidth of up to 500 MHz and high output power.

Future-proof hardware

Scalable for future technologies, applications and requirements

The R&S®CMP180 provides sufficient frequency, bandwidth and EVM performance even for testing of future technologies:

  • Frequency up to 8 GHz
  • Bandwidth up to 500 MHz
  • Class-leading EVM performance
  • MIMO (NR FR1 and higher order True MIMO (WLAN))
  • High output power for OTA measurements

High output power for OTA measurements
Open Lightbox

High output power for OTA measurements

R&S®CMP180 - MIMO ready (NR FR1 MIMO & higher order TrueMIMO (WLAN))

One instrument to test the entire product lifecycle

From EVT via DVT to MP

Current development and production lines for wireless devices must provide an optimum combination of flexibility, performance and capacity utilization as well as software re-utilisation. The R&S®CMP180 is more than a mass production tester. Test engineers can use the instrument throughout the entire development phase, from engineering validation tests (EVT), design validation tests (DVT) and production validation tests (PVT) to mass production (MP).

Self-alignment, on-site calibration and service

Easy self-correction using the self-alignment function

The R&S®CMP180 supports self-correction with an integrated self-alignment function, enabling users to adjust accuracy at any time. This self-alignment function can retrieve the VSA/VSG levels for the correction values stored during the manufacturing process. Additionally, Rohde & Schwarz subsidiaries around the world meet any service demands.

Integrated self-alignment function
Open Lightbox

Integrated self-alignment function

Ultimate flexibility - WLAN 4x4 true MIMO

Scale up by stacking two R&S®CMP180 testers to a R&S®CMPflexx system

R&S®CMPflexx is an extremely flexible high-end solution for WLAN 4x4 true MIMO testing.
Users can scale up by stacking two R&S®CMP180 testers and combining them to a R&S®CMPflexx system to use them together. The R&S®CMPflexx system can have four analyzers (4x VSA), four generators (4x VSG) and four times eight RF ports (4x 8). Separating the two instruments is also simple: simply disconnect the testers and each will be a standalone instrument

Two R&S®CMP180 combined to a R&S®CMPflexx system, in use for WLAN 4x4 true MIMO measurements
Open Lightbox

Two R&S®CMP180 combined to a R&S®CMPflexx system, in use for WLAN 4x4 true MIMO measurements

Uniform and intuitive operation

Discover the integrated user interface - R&S®CMsquares

The R&S®CMsquares is a unified test software solution with a browser-based user experience, combining everything that is required for wireless technology testing. From test configuration, parameterization, measurements as well as test execution in a single environment, with a dashboard style and quick access to different types of applications, it can control all new radio communication testers via a standardized GUI for a unified experience.

Parallel testing of multiple devices & technologies

Optimize utilization and reduce measuring sites

The smart channel function divides the tester into multiple sub-instruments, allowing the tester to share its hardware (VSA / VSG / RF ports) with multiple DUTs, enabling parallel testing of multiple devices and technologies.

Waveform ARB generator

Generate analog and digital signals

Run existing turnkey waveforms for different technologies and generate and run your own waveforms via R&S®WinIQSIM2.

Production testing for Wi-Fi® / NR FR1 / 7.125 GHz

Production testing for Wi-Fi® / NR FR1 / 7.125 GHz

Cellular device testing

The R&S®CMP180 radio communication is the next generation R&D and production non-signaling test platform for Wi-Fi 6E, Wi-Fi 7, 5G FR1 and many more technologies.

Test engineers can use the instrument throughout the entire development phase, from engineering validation tests, design validation tests, and production validation tests, to mass production.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.