364 Results
Rohde & Schwarz user manual for the bandwidth extension application of the signal generator R&S®SMW200A; option R&S®SMW-K555.
Rohde & Schwarz user manual for the ARB ethernet upload application of the signal generator R&S®SMW200A; option R&S®SMW-K507.
Hardware-in-theloop testing with GNSS receivers made easy
03-Jun-2019
Perform DPD on a vector signal generator for improved EVM performance
28-Aug-2023 | AN-No. 1GP139
Reliable testing of HARQ feedback and UL timing adjustment on LTE eNBs with the R&S®SMW200A simplifies eNB performance testing and eliminates the need for test UEs
By making the simulation of fading scenarios easy and flexible, the R&S®SMW200A is the perfect tool to verify that your MIMO receiver can meet performance requirements.
27-Oct-2020
05-Sep-2023
Rohde & Schwarz and Greenerwave collaborate to verify RIS modules and drive 6G researchReconfigurable intelligent surfaces (RIS) can revolutionize wireless communication performance for 5G and future 6G applications. A groundbreaking measurement campaign by Rohde & Schwarz and Greenerwave confirms the capabilities of a novel FR2 RIS module, improving coverage and efficiency.
06-Jun-2024
Rohde & Schwarz and VIAVI offer joint network test solutions supporting Open Radio Commercialization and InnovationThe United States Department of Commerce will provide funding to promote the deployment of open networks in the U.S. and abroad. Rohde & Schwarz and VIAVI offer joint test solutions to meet the needs of radio equipment manufacturers who plan to apply for the funding.
How it is possible to generate WLAN signals according to different standards using the SMW200A? Find out in this FAQ.
With the R&S®Pulse Sequencer radar simulation software, users can easily and intuitively create scenarios for simulation of angle of arrival (AoA).
02-Apr-2020
IQ data streaming - sample rate conflict if wideband SMW200A is connected to SMBV100A
This application note provides insights into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. Including an introduction to HIL testing and realtime o
22-Jan-2021 | AN-No. 1GP124
A general discussion of today’s GNSS testing needs is followed by an overview of key features and possible GNSS configurations for the R&S®SMW200A. Video, R&S®SMW200A, High-End GNSS Simulator, Automotive High-End GNSS Simulation with the R&S®SMW200A
The R&S®FSW and R&S®SMW200A are leading hardware solutions for 5G NR base station tests - set up all required parameters in no time with just a few clicks.
25-May-2021
Testing radar warning equipment in realistic scenarios is crucial to reliable field performance. Commercial vector signal generators (VSG) such as the R&S®SMW200A from Rohde & Schwarz have become a very attractive alternative thanks to their increased available bandwidth and processing power.
13-Aug-2020
R&S GNSS and Avionics Simulation for Rohde & Schwarz Signal Generators - Specifications
23-May-2022
Rohde & Schwarz announces unique 56 GHz and 67 GHz frequency options for R&S SMW200A vector signal generatorRohde & Schwarz has introduced not just one but two new maximum frequencies for the R&S SMW200A vector signal generator, bringing previously impossible high performance to digitally modulated signals up to 67 GHz and beyond. The R&S SMW200A is first to enable flat frequency response and 2 GHz modulation bandwidth above 44 GHz. In addition to all applications already supported up to 44 GHz, the 100 kHz to 56 GHz option covers all currently used 5G frequencies, plus earth-to-satellite applications. The 100 kHz to 67 GHz option also supports planned higher frequency 5G bands, the 60 GHz WiGig band, and inter-satellite links.
This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.
13-Jul-2020 | AN-No. GFM345
Noise Power Ratio Signal Generation and Measurement
Noise Power Ratio is a tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device.
06-Nov-2015 | AN-No. 1MA29
This video explains the LTE-U technology and demonstrates how to efficiently measure LTE signals in the 5 GHz unlicensed band on eNodeBs using the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz. video, SMW200A, testing, FSW, signal, signal generator, signal analyzer, spectrum analyzer Testing LTE-U capable eNodeB with R&S®SMW200A and R&S®FSW
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
Testing automotive radars against norm interferers; The R&S ® Pulse Sequencer software simulates arbitrary RF environments and supports the generation of radar norm interferers to test automotive radars operating in the 24 GHz, 77 GHz and 79 GHz frequency band.
20-Oct-2016
Generate multiple signals aligned in amplitude, delay and phase This video shows how to set up R&S®SMW200A vector signal generators and use the RF Ports Alignment option SMW-K545 together with the RFPAL PC software to generate multiple signals that are aligned in amplitude, delay and phase at the input of a multi-port DUT.
Whatever goes up on your drawing board: The R&S®SMW200A will help make your visions come true, now and in the future.
Reproducible receiver tests under car-to-car fading conditions
06-Nov-2017
Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.
18-Mar-2019
30-Aug-2023
Rohde & Schwarz showcases its latest mmWave test solutions at the European Microwave Week in BerlinJoin Rohde & Schwarz in Berlin for EuMW 2023, Europe's premier microwave event! Discover cutting-edge test solutions focused on early sub-THz research for 6G.
07-Nov-2023
When innovation meets production – Rohde & Schwarz exhibits at productronica 2023Innovation and production – hand in hand. The Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Visit us at booth A1/375.
The R&S®Pulse Sequencer software automatically uploads the interpreted PDW lists on the R&S®SMW200A to generate the most agile radar signals.
20-Feb-2018