158 Results
With the R&S ® RTB2000 digital oscilloscopes, you control and interact remotely via LAN. These oscilloscopes incorporate the USB-based connectivity standard media transfer protocol (MTP).
20-Mar-2017
Design and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG
15-Feb-2002 | AN-No. 7BM38
This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.
27-Mar-2018 | AN-No. 1GP119
Rohde & Schwarz offers a compliance test solution using the R&S®RTE or the R&S®RTO oscilloscope.
27-Jan-2016
A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer.
27-Feb-2015 | AN-No. 1MA145
21-Jun-2022
World ATM Congress 2022: Rohde & Schwarz unveils the future with LDACSLDACS allows modern IP-based datalink communications, a cornerstone technology within the Future Communications Infrastructure (FCI) for aviation. It is being standardized by the International Civil Aviation Organization (ICAO) and first flight tests with Rohde & Schwarz demonstrators have successfully validated its capabilities.
22-Apr-2021
New R&S NGA100 brings linear accuracy to the basic power supply classSimply providing DC electricity is the purpose of a basic power supply, the piece of test equipment most commonly found on workbenches around the world. The R&S NGA100, a new series of basic power supplies from Rohde & Schwarz, goes beyond this requirement and brings a performance level and extra functions not usually associated with this instrument class.
The current situation in the film industry with its tremendous amount of file formats, codecs and containers which exists to handle digital video data, is a real challenge when it comes to exchanging content. This scenario is caused due to the lack of a general standard for the exchange of digital video data, corresponding to the HDCAM-SR standard.
08-Jun-2022
Rohde & Schwarz and Comprion announce availability of R&S test profiles for eSIM device testingMobile devices with a conventional sim card interface were previously configured via a special test SIM card so that they were optimally prepared for testing with the intended network simulator in the test lab. For mobile devices containing a physically inaccessible eSIM (embedded SIM), this device configuration now takes place digitally via the COMPRION eSIM Test Profile Service.
This application note illustrates the upgrade from the available wireless TV standard ATSC to its expansion ATSC Mobile DTV described in the new standard A/153 (ATSCM/H), in which Rohde & Schwarz has played a major development role.
22-Sep-2009 | AN-No. 7EB02
06-Jun-2022
Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS2022Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS 2022.
This application note covers the fundamentals of analog component signals and shows how the signal quality can be measured.
28-May-2015 | AN-No. 7MH107
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
16-Jun-2015 | AN-No. 1EF92
ANSI/SCTE 40 Conformance Testing Using the R&S SFU, R&S SFE and R&S SFE100
29-Oct-2009 | AN-No. 7BM68
09-Nov-2022
Rohde & Schwarz next generation oscilloscope R&S MXO 4 on center stage at electronica 2022Rohde & Schwarz showcases at electronica 2022 (booth A3.307) the new R&S MXO 4 oscilloscope plus a wide range of test and measurement solutions tailored to developers and test engineers.
02-Jul-2020
Rohde & Schwarz Cybersecurity researching next-generation encryption projectsThe aim of the project is the integration of solutions in the European digital landscape on a broad basis and the creation of several open QKD testbeds as well as smaller demonstrators to present network functionality and use cases to potential end users and relevant stakeholders.
This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.
24-Feb-2016 | AN-No. 1GP97
The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.
22-Aug-2014 | AN-No. 1MA231
18-Apr-2023
Rohde & Schwarz joins Ericsson Enterprise Partner Program in the Industry 4.0 track for system integratorsRohde & Schwarz announced to participate in Ericsson Enterprise partner program, delivering value by providing integrated solutions and network analytics services to maximize network quality and performance of private 5G networks.
16-Feb-2021
Rohde & Schwarz enters source measure unit market with the new R&S NGUWith two new source measure units (SMU), Rohde & Schwarz enters a market previously not addressed by the power products of the test and measurement specialist. The performance of the new R&S NGU201 and R&S NGU401 SMUs enables simultaneous sourcing and measuring of currents and voltages with high precision. The two-quadrant R&S NGU201 addresses wireless device battery tests and automatically switches from source mode to sink mode at a defined positive input voltage. The four-quadrant R&S NGU401 can also switch at negative voltages, supporting source measurements for a vast range of power supply types.
06-Jul-2022
Rohde & Schwarz supports i14y Lab Summit 2022 with practical demos of its O-RAN test solutionsAt the recent i14y Lab Summit 2022 in Berlin, Rohde & Schwarz has showcased as one of the lab’s partners its proven and powerful measurement instruments used to verify the conformance of O-RAN Radio Units and the end-to-end network performance. Led by Deutsche Telekom, the i14y Lab is an industry consortium aimed at accelerating network disaggregation and Open RAN by building a European and German ecosystem of vendors and system integrators. Through early stage collaboration with open lab partners and customers, Rohde & Schwarz is able to adopt its portfolio in accordance with new test requirements.
23-Jun-2021
Rohde & Schwarz presents mobile network infrastructure testing from design to production at MWC21 in BarcelonaRadio access network (RAN) landscapes deploy various kinds of infrastructure equipment, ranging from macro to small cell base stations. Evolving 5G NR technology in particular makes infrastructure equipment testing challenging due to increasing MIMO complexity and beamforming, wider bandwidths and new spectrum bands up to the mmWave range. Mobile World Congress is returning to Barcelona in June 2021, and Rohde & Schwarz will be showcasing its latest class-leading mobile network infrastructure testing solutions, which address various needs and enable the mobile industry to leverage the opportunities of 5G.
06-Nov-2019
Rohde & Schwarz together with Fraunhofer Institutes HHI and IAF join forces in researching 6G at THz frequenciesWhile the new 5G technology is at the first stages of rollout, Rohde & Schwarz, the Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, HHI and the Fraunhofer Institute for Applied Solid State Physics IAF are taking a step further with demonstrations in the terahertz (THz) frequency band, related to the 6th generation wireless mobile communication (6G). The collaboration has resulted in a wireless transmit and receive system operating between 270 and 320 GHz, with further frequency extensions for potential 6G bands already in preparation.
07-Jul-2020
Rohde & Schwarz introduces R&S EM200 for spectrum monitoring and direction finding in a compact formatRohde & Schwarz introduces R&S EM200 for spectrum monitoring and direction finding in a compact format Merklinghaus Munich The new R&S EM200 digital compact receiver by Rohde & Schwarz , features a wide frequency range and supports spectrum monitoring and direction finding with minimum SWaP.
19-May-2021
T-7A Red Hawk to use Rohde & Schwarz radio communicationsThe new Boeing T-7A Red Hawk advanced pilot training system for U.S. Air Force pilots will be flying with Rohde & Schwarz’ R&S MR6000R software defined, multiband-capable airborne transceivers.
R&S®WinIQSIM2 has been especially developed for easily generating digitally modulated signals. The graphical user interface allows intuitive operation, supported by context-sensitive help. By offering a convenient way to create any standard-compliant waveform with all the included standards and to generate multicarrier signals as well as multisegment waveforms, R&S®WinIQSIM2 is suitable for a wide range of applications.
The R&S®VSE vector signal explorer software brings the experience and power of Rohde & Schwarz signal analysis to the desktop, offering a wide range of analysis tools for troubleshooting and optimizing designs on your PC. With this software, users analyze and solve problems in analog and digitally modulated signals for a wide range of standards using Rohde & Schwarz signal and spectrum analyzers and oscilloscopes.
12-Sep-2023
Rohde & Schwarz and Qualcomm to demonstrate 5G Broadcast ecosystem readiness at IBC2023Rohde & Schwarz and Qualcomm to demonstrate 5G Broadcast ecosystem readiness at IBC2023
R&S RTB2000 Project your oscilloscope screen with display over LAN - Application Card