Download Center

For further information please refer to "www.rohde-schwarz.com/royalty-free-products".35 MBV 4.0 13.12.2018 R&S®SMx RF and Baseband Correction Toolkit Software for equalizing I/Q imbalance and RF frequency response of generator setups consiting of a R&S®AFQ100A / R&S®AFQ100B and a R&S®SMU200A / R&S®SMJ100A / R&S®SMATE100A / R&S®SMBV100A / R&S®SGS100A.

update/software/secu/2019/05/windows6.1-kb4499175-x64_3704acfff45ddf163d8049683d5a3b75e49b58cb.msu 2 Check Applicable Instruments 2.1 Instruments, where the patch has been tested and released The following table shows an overview of applicable instruments: Device Windows XP (Embedded) SP3 Windows Embedded 7 32-bit Windows Embedded 7 64-bit SFE, SFC X BTC X UPV, UPP X X AFQ100A, AFQ100B X SMU200A, SMJ100A

English (PD 5213.5074.22)

File DescriptionDateRelated Content 02.10.2020 LabVIEW driver rsrfsiggen history 01.03.2021 IVI.NET driver RsRFSigGen history 01.03.2021 LabWindows/CVI, VXIpnp driver rsrfsiggen history 01.03.2021 Driver NameSizeVersionDateLabVIEW 2015 driver rsrfsiggen 60 MB1.13.0 01.03.2021 VXIplug&play x86 driver rsrfsiggen 10 MB1.13.0 01.03.2021 VXIplug&play x64 driver rsrfsiggen 11 MB1.13.0 01.03.2021 IVI.NET

English (PD 5213.5074.12)

Slide left Slide right

R&S®SMJ100A Vector Signal Generator - Product Brochure

R&S®SMJ100A Vector Signal Generator - Product Brochure RU

R&S®SMJ100A Vector Signal Generator - Product Brochure ZH

Describes all instrument functions and remote control commands of the base unit, including measurement and programming examples. Also describes some general functions that apply to several applications.Includes the contents of the Quick Start Guide manual.The online version contains the documentation for the R&S®SMJ100A base unit and all options for immediate display (no download required).

Provides information on security issues when working with R&S®SMJ100A in secure areas.

Provides the information required to prepare the instrument for use and start working.Basic operations and handling are described.

Describes the specific functions of the application, including the remote control commands with programming examples.The R&S®WinIQSIM2TM User Manual (online version) contains the documentation of the software and all options for immediate display (no download required).Tip: Click on the title of this page for information on where to find the user manuals of the digital standards.

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

15-Sep-2012 | AN-No. 1MA206

This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent® ADS® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow. Versions for both WINDOWS XP® and LINUX® operating systems are available.

04-Aug-2012 | AN-No. 1MA72

Describes the specific functions of the application. Information required to install and prepare the software for use and start working, as well as the remote connection to Rohde&Schwarz instruments are described.The application is supported by the following products:R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A, R&S®AMU200A and the I/Q modulation generators R&S®AFQ100A and R&S®AFQ100B.For information on operating the product see the corresponding user manual.

This application note describes how to create and generate standard-conform IEEE 802.15.4 test signals with the Rohde & Schwarz Vector Signal Generators (VSG).

08-Jan-2016 | AN-No. 1GP105

The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

20-Dec-2012 | AN-No. 1MA035

English (PD 3606.6470.22)

Software tools allow to make the control of T&M instruments more convenient. The adoption of the following tools for Windows®-based T&M instruments is described: ● Synergy:One mouse and one keyboard control a group of T&M instruments ● CamStudio:Video clips of the display of a T&M instrumentare recorded during operation

13-Jun-2013 | AN-No. 1MA218

Technical specifications of the R&S®Pulse Sequencer Software options for the R&S®SMW200A, R&S®SMBV100A, R&S®SMBV100B, R&S®SGT100A, R&S®SMU200A, R&S®SMJ100A signal generators from Rohde & Schwarz

Application Note 1MA104 shows you how to quickly and easily create TD-SCDMA test signals for user equipment and base station tests as stipulated in the standards TS 34.122 and TS 25.142.

10-May-2007 | AN-No. 1MA104

This application note describes how to connect R&S® test and measurement products quickly and seamlessly to AWR® Visual System Simulator™ (VSS) via a GPIB or LAN interface. Using AWR® Connected™ customized for Rohde & Schwarz hardware and R&S® WinIQSIM2™ signal simulation software, the flexibility of digital radio standards is highlighted and its integration into VSS is demonstrated.

20-May-2010 | AN-No. 1MA174

This application note describes how to measure the coherence (phase-, timing and gain-differences) between two RFSignals using Rohde&Schwarz spectrum analyzers, a Rohde&Schwarz signal generator and the R&S FS-Z10 Coherence Unit.

28-Sep-2010 | AN-No. 1EF70

The foregoing application note is intended for everyone who desires to become more familiar with the use and upload of custom data in ARB, digital modulation and RF list mode. Particularly, this note describes the instruments R&S® SMW200A, R&S® SGT100A, R&S® SMBV100A, R&S® SMU200A, R&S® SMJ100A and R&S® SMATE200A and provides an overview of already available solutions as well as it gives hints for the writing of own applications. Please also see the application note 1GP88 for the ARB Toolbox software and the application note 1GP96 for the CDM-Toolbox software.

22-Dec-2010 | AN-No. 1GP62

Femtocells or Home base stations are an important development for cellular networks. This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology. Tests, test plans and hardware setups for Femtocells with and without receiver diversity are detailed. Find hints about the instrument settings and have a look at typical measurement results. An introduction to simulating GPS / A-GPS signals for testing the GPS receiver of a Femtocell completes the paper.

02-Feb-2012 | AN-No. 1MA139

This Application Note describes how to perform measurements on power amplifiers for TD-SCDMA base stations to specification TS 25.142 using Rohde & Schwarz generators, power meters and signal/spectrum analyzers. The TD-SCDMA application firmware for Rohde & Schwarz generators and analyzers as well as their outstanding performance facilitate efficient and rapid measurements.

31-Jul-2007 | AN-No. 1MA103

This document presents a simple procedure for network analysis that is more cost-effective than the use of scalar network analyzers. It allows the accurate measurement of the transmission characteristics of filters, amplifiers and frequency converters over a large frequency and dynamic range. In order to reach very high measurement speeds, Rohde & Schwarz signal generators are operated in 'List Mode', and Rohde & Schwarz power meters are operated in 'Buffered Mode.' The required programming for the signal gene­rator and the power meter is illustrated by excerpts from a Visual Basic program which is available, free of charge, upon request.

14-Jul-2006 | AN-No. 1MA101

Multiple input multiple output (MIMO) technology is an integral part of 3GPP E-UTRA long term evolution (LTE). As part of MIMO, beamforming is also used in LTE. This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.

26-Apr-2013 | AN-No. 1MA187

The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.

01-Jan-2013 | AN-No. 1MA153

This application note describes how to use the Rohde & Schwarz software tool ‘RsBatchConvert.exe’ for the conversion of binary data or WinIQSIM generated AMIQ waveforms into the new waveform format. The tool not only rescales I/Q data contained in the file but also changes the K-option requirement from WinIQSIM Kxx to the new WinIQSIM2 K2xx options. Thus, new instruments with installed K2xx options may be used to continue using existing waveform files.

18-Jun-2009 | AN-No. 1GP64

This Application Note describes measurements on RFID readers and chipcards according to ISO/IEC 14443 and similar standards, using a signal generator and a spectrum analyzer. Using a modern spectrum analyzer like the R&S®FSL not only increases accuracy and measurement speed, but also simplifies operation. Interoperability tests, in particular, are simplified by generating reader test signals with a signal generator. With software option R&S®SMx/AMU/AFQ-K6 chipcards can be tested without a reader

25-Jan-2010 | AN-No. 1MA113

Application Note 1MA68 has been replaced by .

10-Dec-2008 | AN-No. 1MA68

Rohde & Schwarz signal generators can generate standard-compliant WLAN IEEE 802.11ac signals up to 160 MHz bandwidth with excellent EVM performance. This application note demonstrates the generator test solutions and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.

26-Apr-2013 | AN-No. 1GP94