53 Results
15-Feb-2024
Rohde & Schwarz enables Qualcomm to pioneer new frequency ranges for future 5G-Advanced and 6G networksRohde & Schwarz T&M equipment plays key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3, the future frequency ranges for 5G-Advanced and 6G.
15-Sep-2023
Rohde & Schwarz and IMST demonstrate active antenna array OTA-testing for satellite terminals at the EuMW 2023Rohde & Schwarz and IMST showcase OTA measurements of electrically large beamforming antenna arrays for SATCOM applications at EuMW 2023.
EVM, Optimize EVM, 5G NR, signal generator, signal analyzer, 5G, Component Testing, FR2, SMW, FSW Easy and optimized EVM measurement of 5G NR signals
Rohde & Schwarz application sheet on the significance and effects of the Bit Error Rate (BER) parameter for signal analysis, in particular using the R&S FSW-K70 application
12-Apr-2022
Rohde & Schwarz further improves class-leading R&S FSW with new Enhanced Dynamic Front EndError vector magnitude (EVM) is one of the main parameters to characterize the performance of a digital transmitter or receiver. The well-established R&S FSW signal and spectrum analyzer from Rohde & Schwarz has been the leading instrument for high-end measurements requiring extreme precision. Its new front end continues the path of innovation with unrivaled EVM measurement accuracy for wideband modulated signals in the mmWave range. This makes the solution ideal for testing any high-end communication component or systems, including 5G NR FR2 or IEEE 802.11ay / ad chipsets, amplifiers, user equipment and base stations.
Unique is its excellent EVM performance even at high output power levels. video, spectrum analyzer, SMBV100B, EVM performance The R&S®SMBV100B combines large RF bandwidth and excellent signal quality.
30-Oct-2023
Enabling an AI-native air interface for 6G: Rohde & Schwarz showcases AI/ML-based neural receiver with optimized modulation at Brooklyn 6G Summit, in collaboration with NVIDIARohde & Schwarz and NVIDIA showcase AI/ML-based neural receiver with custom modulation at Brooklyn 6G Summit
05-Jun-2023
Rohde & Schwarz, Fujikura, and Avnet validate CATR OTA test systems for 5G mmWave phased array antenna R&D testingDesigning a 5G FR2 phased array antenna module (PAAM) requires over-the-air (OTA) testing to measure parameters like equivalent isotropic radiated power (EIRP) and effective isotropic sensitivity (EIS) in addition to traditional radiation patterns. Rohde & Schwarz has joined Fujikura and Avnet to validate their new development kit for 5G mmWave phased array antenna modules. The R&S ATS800B benchtop CATR OTA test system from Rohde & Schwarz is ideal for prototype testing in an open environment.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G How about 5G EVM measurements better than 40 dB at 28 GHz?
06-Jun-2022
Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS2022Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS 2022.
07-Nov-2023
When innovation meets production – Rohde & Schwarz exhibits at productronica 2023Innovation and production – hand in hand. The Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Visit us at booth A1/375.
A variety of measurements are supported including 3GPP 5G-NR EVM, LTE DL EVM and spectral measurements. SBT can easily be integrated in existing test environments.
In an exemplary EVM measurement scenario test times are reduced significantly even when receiving IQ data from just a single instrument. Server-Based Testing, 5G, Speed, SBT R&S Server-Based Testing helps to reduce test times for workloads that can be parallelized.
This video demonstrates a power vs. frequency sweep while measuring error vector magnitude (EVM), crest factor, adjacent channel leakage power ratio (ACLR) and other relevant parameters using the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer from Rohde & Schwarz.
The example in the video shows the test model required to perform signal quality measurements such as error vector magnitude (EVM) The example in the video shows the test model required to perform signal quality measurements such as error vector magnitude (EVM).
How about the error vector magnitude (EVM)? This video compares the performance of a V5GTF standard-compliant signal showing a standard-dependent high peak-to-average power ratio (PAPR) with a clipped version of such a signal. Did the crest factor improve? How about the error vector magnitude (EVM)?
The amplifier personality provides all results such as AM/AM conversion, gain compression and EVM from a single measurement with the specified stimulus.
ACLR, raw EVM, gain compression and many more results can be measured from a single capture using almost any input signal – whether mobile comms, satellite or just a ramp signal. With the option to calculate and apply pre-distorted waveforms within the measurement option, the spectral performance and EVM gains can be evaluated when applying a DPD algorithm.
Watch this video to explore its underlying performance while measuring error vector magnitude (EVM) of a 100 MHz wide 5G NR signal at 47.2 GHz. On December 10, 2019 the US regulator, the Federal Communications Commission (FCC), started the so-called auction 103 for spectrum licenses in the 37 GHz, 39 GHz and 47 GHz frequency bands.
16-Jan-2023
New R&S PVT360A one box solution for FR1 base station, small cell, and RF component characterization and production testRohde & Schwarz introduces the new R&S PVT360A performance vector tester, a VSG/VSA single box tester optimized for FR1 base station, small cell and RF component testing in production and characterization environments.
Key parameters such as EVM and the AM-AM curve are measured and the compensating effect of digital predistortion is shown. amplifier, AM-AM, AM-PM, saturation, non-linearity, digital predistortion, FSV3-K18 This video shows how to measure the distortions caused by an amplifier under test.
The R&S ® SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S ® FSW enables full PA characterization, including EVM, gain and distortion measurements. FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows simplified PA characterization with envelope tracking presented at GSMA MWC 2015
16-Mar-2020
Rohde & Schwarz enables sub-THz ultra wideband signal analysisRohde & Schwarz is paving the way for research in the terahertz frequency range by demonstrating multi gigabit data transmission in the D-Band at 140 GHz. The setup features the R&S FSW high-end signal and spectrum analyzer equipped with an R&S FSW-B8001 option, supporting an unparalleled 8.3 GHz internal analysis bandwidth. This new hardware option will be available soon from Rohde & Schwarz.
The example shows an error vector magnitude (EVM) measurement on a two-channel 5.2 Gsample analog to digital converter from Texas Instruments using the R&S®SMW200A vector signal generator, the R&S®SMA100B RF and microwave analog signal generator and the R&S®VSE vector signal analysis software from Rohde & Schwarz.
09-Sep-2021
Rohde & Schwarz introduces R&S VSESIM-VSS that combines EDA simulation with hardware testingT&M expert Rohde & Schwarz and Cadence have collaborated on a solution aimed at simplifying the engineering process from RF design to implementation and enhancing accuracy by using realistic signals for both simulation and testing. The new R&S VSESIM-VSS signal creation and analysis tool speeds up the development process for RF components. It is particularly useful for customers in the wireless, automotive, and aerospace and defense industries as well as for manufacturers of active components and systems.
23-May-2023
Rohde & Schwarz to host RF Design Challenge at IMS2023At IMS2023, Rohde & Schwarz is set to exhibit a range of live demos that showcase the cutting-edge developments within the industry. IMS attendees will also have the opportunity to participate in the interactive "Are you a genius?" RF Design challenge, putting their knowledge to the test at the Rohde & Schwarz booth.
26-Jan-2021
R&S SMM100A vector signal generator redefines midrange signal generation for 5G, Wi-Fi 6E and much moreRohde & Schwarz introduces the R&S SMM100A, the only vector signal generator with mmWave testing capabilities in its class. The instrument meets the rigorous expectations for generating digital signals for the most advanced wireless communication devices entering production, as well as for developing future products and technologies.
10-Sep-2020
Rohde & Schwarz upgrades R&S FSW signal and spectrum analyzer to 8.3 GHz internal analysis bandwidthWith the new R&S FSW-B8001 option, the well-established R&S FSW high-end signal and spectrum analyzer now supports an industry-leading 8.3 GHz internal analysis bandwidth, offering unequaled dynamic range and sensitivity. Design engineers developing latest radar and wireless communications technologies as well as future satellite systems will benefit significantly from the extended bandwidth available in a one-box solution.
The measurement of error vector magnitude (EVM) is relative – but what is the reference?
02-Mar-2020
22-Dec-2021
Rohde & Schwarz collaborates with Broadcom on test solution for next generation 6-GHz Wi-Fi devicesThe R&S CMP180 radio communication tester has been successfully validated for Broadcom’s Wi-Fi 6E chipsets. OEMs and ODMs of wireless devices are now able to bring their first next generation 6-GHz products to the market.