Regulatory bodies deploy spectrum monitoring solutions from Rohde & Schwarz in order to plan, verify and rectify the actual usage of the frequency spectrum.

Join this webinar to get an up-to-date overview of radar technology, the maket and the latest capabilites of automotive radar object simulation and more.

Rohde&Schwarz supports the GPS / A-GPS Technology for Wireless Communications Testers & Systems and Signal Generators.

The DVB-C2 is to increase transmission capacity by more than 30 % while maintaining the same channel bandwidth.

In contrast to traditional broadcasting, many different bodies are working on IPTV technology services.

Rohde&Schwarz supports ATV L/L Technology for Broadcasting and Multimedia T&M

This webinar focuses on the challenges and what it takes to design and launch customer-premises equipment (CPE) for FWA.

The webinar shows the applicability of FFT-based receivers for EMI compliance measurements, an inside view on the technology and practical use cases.

You’ll gain a guided overview of the current 3GPP roadmap, including Release 18 and 19 studies on model transfer, AI-assisted media and management, and the first pilot use cases in the 5G air interface. Learn how machine learning is enhancing channel state information (CSI) feedback, beam management, and positioning and how interoperability between vendors is being validated.

Learn how 5G coverage measurements at port terminals help operators to ensure more efficient and safer operation of automated guided vehicles (AGV).

Automated testing against the Chinese national GNSS test standard (GB/T 45086.1‑2024) with R&S®CMWrun sequencer software and the R&S®SMBV100B vector signal generator

20-Feb-2025

This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).

03-Nov-2015 | AN-No. 1MA194

A turnkey 5G Field-to-Lab solution based on R&S®CMX500

On the path to the 5G NR network commercialization and service launch, field test is one of the essential user centric processes that User Equipment (UE) vendors should go through

16-Jul-2021 | AN-No. 1SL369

The R&S®SMBV100B delivers precise synchronization information for communications in C-V2X mode and very accurate position information to the device under test.

18-Nov-2019

NB-IoT field-tolab testing with R&S®CMWcards

19-Feb-2019

This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.

02-Jun-2021 | AN-No. GFM341

Automotive field-to-lab testing with R&S®CMWcards

19-Feb-2019

Video quality testing of automotive infotainment devices - Application Card

21-Feb-2018

Meet our mobile network testing experts and find out what they have to say about the latest telecom industry trends and innovations.

Discover how network testing ensures high-quality in-building LTE and 5G deployments. Learn more about the entire indoor deployment cycle of mobile networks.

Discover our collection of detailed use cases demonstrating how our ARDRONIS counter-drone solutions can be deployed to protect a variety of critical assets and environments.

Rohde & Schwarz supports the CMMB - Standard for Chinese Mobile Multimedia Broadcasting for broadcasting and Multimedia T&M, wireless communications testers, wireless communications systems, singal analyzers and spectrum analyzers.

Rohde&Schwarz supports ISDB-TB Technology for Mobile Network Testing and Broadcasting and Multimedia T&M and Transmitters.

DTMB is synonymous with the Chinese GB20600-2006 standard, which defines framing structure, channel coding and modulation for the digital television terrestrial broadcast system in the UHF and VHF bands.

Get this poster for an intuitive overview of 5G key technologies and learn about related test solutions from Rohde & Schwarz.

This white paper will provide you with a concise overview of RedCap and describe the impact of on the UE design and the operation within a 5G network.

A quick overview of power supplies will guide you in selecting a suitable measurement solution. We will be concluding the webinar by discussing battery modeling and simulation, dealing at the same time with real battery conditions such as electrical properties, discharge profiles, and changes caused by aging.

Register for this webinar that is intended for engineers who work on high-speed digital design and test. In particular, we will be focusing on HDMI 1.4b / 2.1 interfaces.

The webinar will inform you about future trends of ATC infrastructures in operation. The content and demos will be interesting for ANSP's radio and VCS experts, as well as CTOs.

Register now and get a comprehensive introduction into the challenges for testing next-generation mobile network equipment in production.