Brief descriptionR&S®CA100 is a standalone software solution for analysis, classification, demodulation and decoding of digital and analog IF signals. The software provides powerful signal analysis and signal processing functions and runs on a Windows PC. If connected to modern monitoring receivers with internal digital downconverters (DDC), e.g.

Multichannel and bit stream radiomonitoring signal analyzers from Rohde & Schwarz are crafted to meet the high demands of modern radio communication.

R&S CA100 PC-Based Signal Analysis and Signal Processing Software

Solutions from Rohde & Schwarz for the entire signal analysis workflow - Poster

Turn your goals into reality - Brochure The essence of Rohde & Schwarz signal interception and signal analysis

(DDC)Time and frequency domain signal analysis for determining technical parametersCovering the measurement methods specified in the ITU-R SM.1600 recommendationAutomatic detection of signals in wideband signal scenariosAutomatic recognition of modulation parameters including channel code/transmission system classificationComprehensive library of demodulators and decoders (in combination with R&S®CA100

softwareOnline LAN transfer from an R&S®EM100 to a PC and to the R&S®CA100 analysis software, for example, to operate an efficient small system for signal reception and analysisRecording of captured data using R&S®CA100; provision of data for documentation, replay or subsequent additional evaluationRemote control of all receiver functions via LAN interface (SCPI command set in line with IEEE 488.2

analysis software, for example, for operating an efficient small system for signal reception and analysisOnline analysis or recording of captured data using R&S®CA100, provision of data for documentation, replay or subsequent additional evaluationITU-compliant signal analysis in line with ITU-R SM.1600 using R&S®CA100 and R&S®CA100IS, optimum tool for single-channel analysis and measurement of analog

analysis software, for example, to operate an efficient small system for signal reception and analysisRecording of captured data using R&S®CA100; provision of data for documentation, replay or subsequent additional evaluationRemote control of all receiver functions via LAN interface (SCPI command set in line with IEEE 488.2)LAN interface for providing the maximum measured data rate during receiver

R&S®DDF260 Digital Direction Finder – superior performance in highly congested signal environments

The R&S®ESME wideband monitoring receiver enables high-performance spectrum monitoring from 8 kHz to 40 GHz reliably, even in high density signal environments.

DWR150 Digital Wideband Recorder - digital wideband recorder for recording and replaying of I/Q and result data with up to 125 MHz bandwidth

DWR100 Digital Wideband Recorder - digital wideband recorder for recording and replaying of I/Q and result data with up to 40 MHz bandwidth

The R&S®EM200 digital compact monitoring receiver is a cost-efficient and optimized solution for remote controlled spectrum monitoring and geolocation. It detects, analyzes, demodulates and locates emissions from 8 kHz to 8 GHz.

Innovative DF antennas Features & BenefitsFast spectrum monitoring with scan speeds of up to 12 GHz/sDisplay and demodulation of signals with up to 20 MHz bandwidthWideband DF antennas and DC power supply capability for mobile operationParallel monitoring and demodulation of one plus three signals within realtime bandwidthOnline signal analysis with live streaming over LAN interface, e.g. with R&S®CA100

R&S® ADD307 (550 MHz to 690 MHz) upon requestReceive Mode Frequency range with separate receiving antenna 9 kHz to 7,5 GHz Scan speed with R&S® DDF007-PS or R&S® EM100-PS options up to 2 GHz/s IF spectrum display range selectable up to 10 MHz Demodulation bandwidth selectable up  to 500 kHz Enhanced signal analysis capability with R&S® CA100 yesGeneral specifications Lithium-ion battery pack operating

sensitivity and signal resolution (compared with conventional analog receivers)Analog-modulated signals demodulated directly in the receiver; contents audible using headphones or built-in loudspeakerDigitally modulated signals converted to the baseband using I/Q demodulation and stored in the receiver or exported via LANOnline and offline analysis of digitally modulated signals, e.g. with the R&S®CA100

R&S®ARGUS 6.1, R&S®RAMON, R&S®CA100)Documented interface description for flexible programming and data processing, even with customerspecific software packageR&S®EB500-Control software package for receiver remote control via 1 Gbit LAN interfaceDocumentation of results on a PC (e.g. spectra or audio content), also for replaying recorded data for offline analysisR&S®EB500-IM option: ITU-compliant measurement

R&S®ARGUS 6.1, R&S®RAMON, R&S®CA100)R&S®RX-10G option: retrofittable 10 Gbit Ethernet LAN interfaceDocumented interface description for flexible programming and data processing, even with customerspecific software packageR&S®ESMD-Control software package (included in scope of delivery) for receiver remote control via 1 Gbit LAN interfaceDocumentation of results on a PC (e.g. spectra and audio content

R&S ESME Wideband Monitoring Receiver - Product Brochure

R&S DDF260 Digital Direction Finder - Product Brochure

R&S IQW Wideband I/Q Data Recorder - Product Brochure

R&S CA210 Signal Analysis Software

DWR150 Digital Wideband Recorder - Product Brochure

DWR100 Digital Wideband Recorder - Product Brochure

R&S EM100 Digital Compact Receiver - Product Brochure

R&S EB500 Monitoring Receiver - Product Brochure Monitoring receiver was specially developed for signal search, radiomonitoring, radio detection and spectrum monitoring in powerful, compact systems.

R&S DDF205 Digital Direction Finder - Product Brochure Accurate digital direction finder combines an integrated monitoring receiver with the correlative interferometer DF method.

R&S EB510 HF Monitoring Receiver - Product Brochure

R&S MP007 Portable Direction Finding System - Product Brochure