R&S®RTP high performance series oscilloscopes benefit from highly accurate measurements, unprecedented speed and a compact form factor. More information.

The option R&S RTP-K110 enables HDMI 1.4b/2.1 compliance testing on the R&S RTP oscilloscopes.

The Rohde & Schwarz options support signal integrity debugging and automated compliance testing of DDR5/ LPDDR5, DDR4/ LPDDR4 and DDR3/ DDR3L/ LPDDR3 interfaces. Learn more.

The R&S®RTP-K140/141 options enable the high-speed serial pattern trigger function with a maximum nominal data rate of 8 Gbps or 16 Gbps. More info.

The external Frontend control software enables the operation of the external Frontends R&S FExx on the R&S RTP oscilloscope.

The K35/K500 option enables bus measurements on R&S®RTO6 and R&S®RTP oscilloscopes. Learn more about the bus measurement oscilloscope software here.

The TDR/TDT software option creates a time domain reflection (TDR) and time domain transmission (TDT) analysis system for R&S®RTO or RTP oscilloscopes. Explore now!

R&S®RTP and R&S®RTO oscilloscopes support TX and RX compliance tests for V1.1/2.0/3.2 Gen 1&2

This option supports automated compliance testing for 100BASE-T, 1000BASE-T, 100BASE-T1 and 1000BASE-T1 Ethernet of options RTO-K22, RTO-K24, RTO-K87, RTP-K22, RTP-K24, RTP-K87

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of Automotive Ethernet BroadR-Reach or 100BASE-T1. Explore the features now.

The R&S®RTP and RTO oscilloscopes supports triggering and decoding of USB 3.1 Gen 1 and Gen 2 signals. Explore the USB 3.1 triggering & decoding software here.

Advanced Jitter Analysis for the RTO and RTP oscilloscopes, enabling the decomposition of the total jitter into it its individual components such as Random and Deterministic jitter.

The R&S®MIPI D-PHY compliance test options offer automated test solutions in line with MIPI and UNH-IOL test specifications. Learn more here.

The R&S®RTO-K81 option supports automated compliance testing of PCI Express Gen 1.1, 2.0 and 3.0 interfaces. Explore the PCI Express 1.1/2.0/3.0 compliance test software.

The R&S spectrum analysis oscilloscope software enhances the multichannel spectrum analysis capabilities of R&S oscilloscopes. Explore now!

The R&S®RTP-K24 and R&S®RTO-K24 option offers an automated compliance test solution for 100BASE-T1 or BroadR-Reach®Ethernet. Learn more here.

R&S®RTP, RTO and RTE oscilloscopes support decoding of 10BASE-T and 100BASE-TX Ethernet. Explore the Ethernet decoding software here.

The R&S®RTP, R&S®RTO and R&S®RTE oscilloscopes support triggering and decoding of SpaceWire data and communications buses. Explore the SpaceWire triggering and decoding software.

The R&S®RTP, R&S®RTO and R&S®RTE oscilloscopes support all data rates: high speed, full speed and low speed. Explore the triggering & decoding software here.

Triggering and decoding of various MIPI highspeed signals (incl. D-PHY and M-PHY) on Rohde & Schwarz RTO and RTP oscilloscopes: Decoding using intuitive menu dialogs, detailed analysis, color-coded protocol fields, table display, etc.. Trigger on errors and other protocol-specific fields.

R&S®RTP and RTO oscilloscopes support decoding of 10BASE-T and 100BASE-TX Ethernet, as well as MDIO. Find out more about the decoding software here.

The arbitrary waveform generator option R&S®B6 enhance R&S oscilloscopes with a fully integrated arbitrary waveform and pattern generator. More information.

Choose the R&S Manchester and NRZ oscilloscope software to trigger & decode any Manchester and NRZ coded serial protocol. Explore the features now.

R&S®RTO2000,; R&S®RTO6 and R&S®RTP oscilloscopes support triggering and decoding of PCI Express Gen 1.1 and 2.0 signals. Explore the PCIe 1.1/2.0 triggering and decoding software.

The R&S®RTP-K86 and R&S®RTO-K86 option offers an automated test solution for 10/100/1000BASE-TEnergy Efficient Ethernet. Explore the compliance test software.

Many R&S oscilloscopes support triggering and decoding of ARINC 429 buses. Explore the ARINC triggering & decoding oscilloscope software here.

Triggering and decoding of various USB signals (incl. USB 1.1/2.0/3.2/PD/SSIC) on Rohde & Schwarz RTO and RTP oscilloscopes: Decoding using intuitive menu dialogs, detailed analysis, color-coded protocol fields, table display, etc.. Trigger on errors and other protocol-specific fields.

R&S®RTO and R&S®RTP oscilloscopes support triggering and decoding of the MIPI-RFFE protocol. Learn more about the MIPI-RFFE oscilloscope software here.

Many R&S oscilloscopes support triggering and decoding of MIL-STD-1553 buses. Explore the supported scopes and learn about MIL-1553 software here.