R&S®FPL1000 Spectrum analyzer

Experience high performance wherever you are

R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Hero view R&S®FPL1000 Spectrum analyzer, Side view R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Back low

Key facts

  • Frequency range 5 kHz to 26.5 GHz
  • SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz 
  • DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz
  • Lightweight with small footprint
  • 40 MHz analysis bandwidth (option)

Brief description

In an RF lab, the R&S®FPL1000 family is as indispensable as an oscilloscope or multimeter. It is a single instrument for many measurement tasks. It can be used for spectrum analysis along with highly accurate power measurements for power sensors and analysis of analog and digitally modulated signals.

Features & benefits

One instrument for multiple applications

A single instrument for many types of measurements
 

You can use the R&S®FPL1000 for spectral measurements, highly accurate power measurements with power sensors and when analyzing analog and digitally modulated signals.

Measurement modes
Open Lightbox

Measurement modes

The standard R&S®FPL1000 base unit supports various advanced spectrum measurement modes

Solid RF performance

Low phase noise and low displayed average noise level
 

Featuring a phase noise of typ. –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of typ. +20 dBm, 1 Hz to 10 MHz resolution bandwidth and typ. –163 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. It is ideal for the lab, production and service tasks.

Phase noise measurement
Open Lightbox

Phase noise measurement

Simple phase noise measurement with a marker function

Intuitive user interface

Operation as intuitive as a smartphone
 

The touchscreen can be used for configuration and performing measurements. A one-finger swipe across the screen adjusts the center frequency or the reference level. A two-finger swipe adjusts the displayed span or level range.

Multiview of the R&S®FPL1000
Open Lightbox

Multiview of the R&S®FPL1000

The sequencer can perform spectrum measurements, adjacent channel power measurements, time domain measurements and spectrogram measurements

Fully portable

It can be used almost everywhere…
 

The low weight of 6 kg, optional battery pack for three hours of operation and carrying bag and shoulder harness mean you can use the R&S®FPL1000 signal and spectrum analyzer wherever you need it.

Carrying bag for the R&S®FPL1000
Open Lightbox

Carrying bag for the R&S®FPL1000

Optional R&S®FPL1000 carrying bag. The R&S®FPL1-B31 battery option allows operation while inside the bag.

Available models

Available models
Models
Frequency range
Phase noise
DANL @ 1 GHz
Max. analysis bandwidth
Instrument type

R&S®FPL1003

Order number 1304.0004.03

Frequency range
5 kHz - 3 GHz
Phase noise
< –108 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL @ 1 GHz
< –163 dBm/Hz
Max. analysis bandwidth
40 MHz (FPL1-B40)
Instrument type
Signal and spectrum analyzer

R&S®FPL1007

Order number 1304.0004.07

Frequency range
5 kHz - 7.5 GHz
Phase noise
< –108 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL @ 1 GHz
< –163 dBm/Hz
Max. analysis bandwidth
40 MHz (FPL1-B40)
Instrument type
Signal and spectrum analyzer

R&S®FPL1014

Order number 1304.0004.14

Frequency range
5 kHz - 14 GHz
Phase noise
< -108 dBc (1 Hz)
(f=1 Ghz, 10 kHz offset)
DANL @ 1 GHz
< -160 dBm/Hz Pre-amp on
Max. analysis bandwidth
40 MHz (FPL1-B40, and FPL1-B11)
Instrument type
Signal and spectrum analyzer

R&S®FPL1026

Order number 1304.0004.26

Frequency range
5 kHz - 26.5 GHz
Phase noise
<-108 dBc (1 Hz)
(f=1 GHz, 10 kHz offset)
DANL @ 1 GHz
<-160 dBm/Hz Pre-amp on
Max. analysis bandwidth
40 MHz (FPL1-B40, and FPL1-B11)
Instrument type
Signal and spectrum analyzer

Available options

Hardware options
Product
Description
R&S®FPL1-B4

Order number 1323.1902.02

Description

OCXO accurate reference frequency

High precision frequency reference

R&S®FPL1-B5

Order number 1323.1883.02

Description

Additional interfaces

Video out, IF out, noise source control, AUX port, connector for R&S®NRP power sensors

R&S®FPL1-B9

Order number 1323.1925.03

Description

Internal generator up to 3 GHz 

R&S®FPL1-B9

Order number 1323.1925.07

Description

Internal generator for 7/14/26.5 GHz

R&S®FPL1-B10

Order number 1323.1890.02

Description

GPIB interface

Additional interface for remote control by GPIB, plug-in unit

R&S®FPL1-B11

Order number 1323.1619.02

Description

YIG preselector bypass

Enables full 40 MHz bandwidth analysis in frequencies up to 26.5 GHz

R&S®FPL1-B19

Order number 1304.0427.02

Description

Second hard disk (SSD)

(mounted on PC board)

R&S®FPL1-B22

Order number 1323.1719.02

Description

RF preamplifier for 3/7.5 GHz.

R&S®FPL1-B22

Order number 1323.1702.02

Description

RF Preamplifier 14 GHz

R&S®FPL1-B22

Order number 1323.1777.02

Description

RF Amplifier 26.5 GHz

R&S®FPL1-B25

Order number 1323.1990.02

Description

1 dB Steps for electronic attenuator

R&S®FPL1-B30

Order number 1323.1877.02

Description

DC Power supply for 12/24 V supply

R&S®FPL1-B31

Order number 1323.1725.02

Description

Li-Ion battery pack

R&S®FPL1-B40

Order number 1323.1931.02

Description

40 MHz analysis bandwidth

Enables the use of 40 MHz bandwidth for R&S®ZNLx-B1 spectrum analysis option

Measurement application options
Product
Description
R&S®FPL1-K7

Order number 1323.1731.02

Description

AM/FM/PM analog modulation analysis

Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(For use in ZNL, ZNLx-B1 is required)

R&S®FPL1-K9

Order number 1323.1754.02

Description

Measurements with R&S®NRP power sensors

Supports R&S®NRP power sensors for power measurements. Requires R&S®ZNLx-B1

Order number 1323.1760.02

Description

Noise figure measurements

Adds the capability to perform noise figure measurements. Requires R&S®ZNL-K1 and R&S®FSL-B5

R&S®FPL1-K40

Order number 1323.1831.02

Description

Phase noise measurement application

Order number 1323.1783.02

Description

EMI measurement application

Finding, classifying and eliminating electromagnetic interference

R&S®FPL1-K70

Order number 1323.1748.02

Description

Vector signal analysis

The R&S®FPL1-K70 vector signal analysis option is a powerful tool for analyzing individual digitally modulated signals down to the bit level.

R&S®FPL1-K70M

Order number 1323.1625.02

Description

Multi-modulation analysis

The R&S®FPL1-K70M multicarrier modulation analysis application (R&S®FPL1-K70 option required) allows DVB‑S2X signals to be analyzed.

R&S®FPL1-K70P

Order number 1323.1631.02

Description

BER measurements with PRBS data

The R&S®FPL1-K70P is an extension of the R&S®FPL1-K70 vector signal analysis option that allows the measurement of raw bit error rate (BER) on PRBS data up to PRBS23.

PC software
Product
Description

Order number 1345.1011.06

Description

Software

Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud

R&S®VSE-K70

Order number 1320.7522.06

Description

Vector signal analysis

R&S®VSE-K106

Order number 1320.7900.06

Description

EUTRA/LTE

Narrowband IoT analysis

Order number 1345.1105.06

Description

R&S®VSE-K7

Order number 1320.7539.06

Description

Analog modulation analysis (AM/FM/φM)

Modulation analysis for AM/FM/φM modulated single carriers

R&S®VSE-K10

Order number 1320.7574.06

Description

GSM measurements

GSM/EDGE/ EDGE Evolution

R&S®VSE-K60

Order number 1320.7868.06

Description

Transient measurements

Transient analysis

R&S®VSE-K60C

Order number 1320.7874.06

Description

Transient chirp measurements

Transient analysis, requires R&S®VSE-K60

R&S®VSE-K60H

Order number 1320.7880.06

Description

Transient hop measurements

Transient analysis, requires R&S®VSE-K60

R&S®VSE-K96

Order number 1320.7922.06

Description

OFDM signal analysis

R&S®VSE-K100

Order number 1320.7545.06

Description

EUTRA/LTE FDD uplink and downlink measurement application

LTE signal analysis

R&S®VSE-K102

Order number 1320.7551.06

Description

EUTRA/LTE advanced and MIMO (downlink)

LTE signal analysis

R&S®VSE-K104

Order number 1320.7568.06

Description

EUTRA/LTE TDD uplink and downlink measurement application

LTE signal analysis

Noise sources
Product
Description

Order number 1338.8008.18

Description

Smart noise source 10 MHz to 18 GHz

Order number 1338.8008.26

Description

Smart noise source 10 MHz to 26.5 GHz

General
Product
Description
R&S®FPL1-Z1

Order number 1323.1960.02

Description

Protective hard cover

R&S®FPL1-Z2

Order number 1323.1977.02

Description

Transport bag, transparent cover

R&S®FPL1-Z3

Order number 1323.1683.02

Description

Carrying vest holster

R&S®FPL1-Z4

Order number 1323.1677.02

Description

Spare battery pack

R&S®FPL1-Z5

Order number 1323.1690.02

Description

Anti-glare film

R&S®FPL1-Z6

Order number 1323.1954.02

Description

Rack mount kit (RAL5014 pigeon blue)

R&S®FPL1-Z6B

Order number 1323.1954.03

Description

Rack mount kit (RAL5000 violet blue)

Application videos

Conducted EMI pre-compliance analysis with an R&S®FPL1000 spectrum analyzer

How to investigate the conducted emissions of a 230V lamp with the EMI measurement application. The setup includes the R&S®FPL1000 spectrum analyzer equipped with option R&S®FPL1-K54 and the R&S®ENV216.

15-Aug-2021

Noise figure and gain measurement using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K30 option measures the noise figure and gain of components such as low noise amplifiers (LNAs).

16-Feb-2019

Analog demodulation using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM, FM and PM modulated analog signals. The R&S®FPL1-K7 is ideal for troubleshooting AM and FM transmitters, for transient and settling measurements of oscillators and for simple chirp analysis of pulsed or continuous wave signals.

16-Feb-2019

Easy to use and portable spectrum and signal analyzer

The R&S®FPL1000 spectrum analyzer from Rohde & Schwarz supports many applications such as power measurements and the analysis of digital and analog modulated signals. The easy to use and portable R&S®FPL1000 is ideal for your everyday working tasks.

16-Feb-2019

Digital demodulation of a Bluetooth LE signal using the R&S®FPL1000 spectrum analyzer

In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error.

12-Feb-2019

Spectrum & Vector network analyzer promotion

Spectrum & Vector network analyzer promotion

Widest variety of fully equipped products up to 36% off.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.