Learn how to configure Rohde & Schwarz products to fit your application.
68 Results
LTE beamforming can be accurately tested with one or more R&S®RTO digital oscilloscopes for a 1×2, 1×4 or even a 1×8 MIMO system.
English - 8 thg 8, 2024
The R&S®RTP and R&S®RTO oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.
English - 15 thg 7, 2024
English - 4 thg 7, 2024
2 MB | PDF
English - 31 thg 1, 2024
Get insights into small cell testing aspects throughout the product life cycle with particular focus on production test solutions for FR2.
English - 19 thg 6, 2023
Generating models with a VNA and using these on an oscilloscope via the deembedding
English - 22 thg 5, 2023
How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE.
English - 12 thg 1, 2022
This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.
English - 8 thg 12, 2021
The demand having a snubber circuit in the power supply topology leads to specific verification methods during the design which are the main focus within this document.
English - 23 thg 6, 2021
Secondary surveillance radar (SSR) bridges the gap between communications systems and classic radar systems. Despite the increasing capabilities of mobile communications, SSR remains a major component in airspace surveillance.
English - 17 thg 5, 2021
This application note discusses important aspects of double-pulse test setups as well as how to perform accurate measurements. Double-Pulse testing is a standard test-method.
English - 22 thg 3, 2021
Characterize radar warning receivers with advanced triggerbased multichannel pulse analysis, using the R&S®VSE-K6A and a Rohde & Schwarz oscilloscope.
English - 2 thg 3, 2021
The R&S®VSE is a powerful tool for comprehensive analysis of a variety of signals, providing full support to the Rohde & Schwarz oscilloscope advanced trigger system.
English - 3 thg 2, 2021
The Rohde & Schwarz oscilloscope R&S®RTO2064 with powerful FFT analysis is great for EMI debugging and a low cost solution for R&D testing.
English - 14 thg 1, 2021
The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.
English - 19 thg 10, 2020
This document describes a method to separate common-mode and differential-mode separation using two oscilloscope channels. This separation approach works without any additional hardware component.
English - 17 thg 9, 2020
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
English - 26 thg 6, 2020
Signal model based approach to joint jitter and noise decomposition - First published at DesignCon 2020 - White Paper
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.
English - 26 thg 5, 2020
Read this application card to learn more about what the 10BASE-T1S Ethernet compliance test offers and how it ensures reliable operation and functionality.
English - 15 thg 5, 2020
Thanks to their multichannel capability, oscilloscopes are ideal for multichannel applications such as the analysis of MIMO, multi-antenna radar and differential high-speed digital signals.
English - 6 thg 5, 2020
The R&S®RTP/R&S®RTO and R&S®VSE meet the need to verify 5G NR MIMO signals and the signal characteristics of beamforming quickly and coherent.
English - 4 thg 3, 2020
High dynamic range current measurements on IoT devices
English - 1 thg 10, 2019
The application fields of oscilloscopes extend to EMI debugging because of their powerful and easy-to-use FFT analysis capabilities– and save time and money.
English - 23 thg 9, 2019
The R&S®RTO and R&S®RTP oscilloscopes are capable of triggering precisely on a pulse as a prerequisite for time domain and frequency domain analysis.
English - 13 thg 3, 2019
This document describes the use of the R&S®RTO and R&S®RTP to demodulate RF pulses for further measurements and precisely trigger on and analyze RF pulses.
For system verification and debugging, eye diagram measurements are the most important tools for efficiently analyzing the signal integrity in any digital design
English - 19 thg 2, 2019
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
English - 17 thg 1, 2019
Automated measurement functions in combination with track functionality make it easier to analyze single events and reveal “long-term” variations.
English - 29 thg 11, 2018
The numerous supply voltages of FPGAs, CPUs and DSPs need to be powered-up in a specific order to ensure reliable operation.
English - 8 thg 10, 2018
