341 Results
FSW-K76/-K77 - Specifications
In this paper we will review the basics of spurious measurements and how the parameters used can affect the detection performance.
14-Jul-2017 | AN-No. 1EF97
FSW-B160R Real-time spectrum analyzer -Specifications
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.
18-Apr-2016 | AN-No. 1EF93
The R&S®FSW signal and spectrum analyzer offers fast and easy-to-use transmitter testing for the demanding DOCSIS 3.1 cable modem (CM) and cable modem termination system (CMTS) requirements.
12-Apr-2016
This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages.
10-Jun-2016 | AN-No. 1MA267
This application note describes a technique to perform a calibrated noise power measurement (P_hot) with spectrum analyzers and noise sources.
31-May-2022 | AN-No. 1EF113
DOCSIS 3.1 BER testing on CATV amplifiers with R&S ® CLGD and R&S ® FSW
06-Dec-2016
08-Dec-2021
Sivers Semiconductors and Rohde & Schwarz collaborate on testing 5G RF transceivers up to 71 GHzAs 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.
R&S FSW-K149 High Rate Pulse Repetition Frequency Ultrawideband Measurements - Specifications
White Paper: Implementation of Real-Time Spectrum Analysis with R&S FSW and R&S FSVR
20-Mar-2015 | AN-No. 1EF77
This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources.
28-Jun-2018 | AN-No. 1EF103
This application note provides information on how to perform spectral emission measurements on pulsed signals with spectrum analyzers using RBW filters.
06-Jun-2019 | AN-No. 1EF106
The R&S®FSW signal and spectrum analyzer facilitates swept spectrum analysis of next generation SARs with true preselection, finer range resolution and image rejection.
16-Apr-2021
Application Note Peak and Mean Power measurements on wideband FMCW radar signals
28-Jun-2019 | AN-No. 1EF107
The R&S®FSQ signal analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.
17-Jan-2017
R&S®FSW-K96/R&S®FSWT-K96/R&S®FSV3-96/R&S®VSE-K96 OFDM Vector Signal Analysis Application
This document provides the technical specifications of the R&S®Fxx-K30 noise figure measurement application.
Combined with an optional frequency range extension up to 90 GHz and the R&S®HA-Z24E external preamplifier operating from 1 GHz to 85 GHz, makes the R&S®FSW85 signal and spectrum analyzer ideal for analyzing wideband signals such as automotive radar FMCW chirp signals, IEEE 802.11ay signals and 5G waveform candidates. video, signal analyzer, spectrum analyzer, FSW85, HA-Z24E, EuMW 2017 R&S®Wideband
04-Jan-2024
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
The R&S®FSW and R&S®SMW200A are leading hardware solutions for 5G NR base station tests - set up all required parameters in no time with just a few clicks.
25-May-2021
This application note provides information how to generate these signals with a vector signal generator and perform NPR measurements with spectrum analyzers.
24-Jun-2019 | AN-No. 1EF108
Rohde & Schwarz signal generators and spectrum analyzers can be used to test IEEE 802.11ax stations in terms of uplink accuracy requirements.
09-Nov-2017
30-Aug-2023
Rohde & Schwarz showcases its latest mmWave test solutions at the European Microwave Week in BerlinJoin Rohde & Schwarz in Berlin for EuMW 2023, Europe's premier microwave event! Discover cutting-edge test solutions focused on early sub-THz research for 6G.
This application note provides information how to perform spectral emission measurements on UWB signals with spectrum analyzers using wide bandwidth RBW filters.
28-Jun-2021 | AN-No. 1EF109
Rohde & Schwarz signal and spectrum analyzers accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.
17-Jul-2017
30-Oct-2023
Enabling an AI-native air interface for 6G: Rohde & Schwarz showcases AI/ML-based neural receiver with optimized modulation at Brooklyn 6G Summit, in collaboration with NVIDIARohde & Schwarz and NVIDIA showcase AI/ML-based neural receiver with custom modulation at Brooklyn 6G Summit
Using WEB Control with the FSW seems to be using ports - which port settings are needed?
Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.
18-Mar-2019