R&S®SMM100A vector signal generator

Redefining midrange    

R&S®SMM100A vector signal generator
Open Lightbox
R&S®SMM100A vector signal generator
Open Lightbox
R&S®SMM100A vector signal generator
Open Lightbox
R&S®SMM100A vector signal generator
Open Lightbox
R&S®SMM100A vector signal generator
Open Lightbox
R&S®SMM100A vector signal generator , front view R&S®SMM100A vector signal generator , front view R&S®SMM100A vector signal generator , side view R&S®SMM100A vector signal generator , hero view R&S®SMM100A vector signal generator , back view

Key facts

  • Frequency range from 100 kHz to 44 GHz
  • Internal RF modulation bandwidth of up to 1 GHz
  • Excellent modulation frequency response, EVM and ACPR
  • 5G NR signal generation for FR1 and FR2
  • Ready for future WLAN frequency and bandwidth requirements  
  • Leap award winner

Midrange vector signal generator with mmWave testing capabilities

The R&S®SMM100A vector signal generator provides remarkably good RF characteristics across the entire frequency range from 100 kHz to 44 GHz. The instrument covers the bands below 6 GHz used by existing wireless
standards as well as the newly defined bands for 5G NR FR1 and Wi-Fi 6E up to 7.125 GHz and the 5G NR FR2 bands up to 44 GHz.
The internal baseband generator in the R&S®SMM100A supports a maximum RF modulation bandwidth of 1 GHz. Digitally modulated broadband signals can thus be generated as required by the prevalent wireless standards. The R&S®SMM100A is well prepared for future bandwidth requirements.

Features & benefits

Excellent SSB phase noise and EVM performance

SSB phase noise of < –129 dBc is specified for an RF frequency of 1 GHz with a 20 kHz offset for the R&S®SMM100A vector signal generator. The typical value of –134 dBc is even 5 dB lower. In addition to excellent RF performance, it also has outstanding modulation characteristics at higher frequencies.
  The impressive R&S®SMM100A EVM performance of < –42 dB (0.8 %) at an RF frequency of 28 GHz for a 100 MHz 5G NR signal is in line with 3GPP test model 3.1.

Measured EVM performance
Open Lightbox

Measured EVM performance

Measured EVM for a 100 MHz 5G NR signal, 3GPP TM 3.1, 28 GHz carrier frequency

Extremely flat frequency response

The signal frequency response within the modulation bandwidth also has a major influence on achievable EVM performance.  Minimizing this parameter in magnitude and phase across the entire RF frequency range of the generator is essential. 
  Intelligent compensation is available for the internal influences of the R&S®SMM100A on the frequency response. The R&S®SMM100A attains a measured magnitude frequency response of < 0.4 dB over the entire RF modulation bandwidth of 1 GHz.

Measured I/Q modulation frequency response
Open Lightbox

Measured I/Q modulation frequency response

Discover scalability

The basic configuration of the R&S®SMM100A supports a maximum RF modulation bandwidth of 120 MHz. Depending on requirements, bandwidth can be extended up to 1 GHz with a license key. With similar flexibility, the ARB memory can be extended from 64 Msample up to a maximum of 2 Gsample. 
  The R&S®SMM100A also comes with various frequency options up to a maximum of 44 GHz. Users can precisely configure the R&S®SMM100A to meet actual requirements.

Important software and hardware options
Open Lightbox

Important software and hardware options

Discover usability

  • Convenient operation with 8.4" touchscreen
  • Structured and intuitive user interface presented in a block diagram
  • Graphical signal monitoring in real time at different points within the overall signal flow path
  • Automation made easy with context-sensitive help system and built-in SCPI macro recorder with code generator

Graphical signal monitoring in real time
Open Lightbox

Graphical signal monitoring in real time

Mobile communications standards

The R&S®SMM100A is well suited for generating signals that comply with the most important wireless communications standards and is an ideal signal generator for 5G NR base station conformance testing.
  With the R&S®SMM-B1044 frequency option, it can cover 5G NR frequency ranges FR1 up to 7.125 GHz and FR2 up to 44 GHz. Together with the bandwidth extension to 1 GHz, it can handle the increased signal bandwidth requirements for 5G applications.

Test case wizard for 5G New radio
Open Lightbox

Test case wizard for 5G New radio

The 5G NR test case wizard allows the R&S®SMM100A to be conveniently and cleverly configured for BTS tests in line with 3GPP TS 38.141.

Ready for the next Wi-Fi generations

WLAN is also part of the trend towards higher frequencies and larger bandwidths. Wi-Fi 6E uses the frequency range between 5.8 GHz and 7.125 GHz. IEEE 802.11be already specifies a signal bandwidth of 320 MHz for future WLAN standards.
  The R&S®SMM-B1007 frequency option up to 7.5 GHz and the R&S®SMM-K524 bandwidth extension to 500 MHz make the R&S®SMM100A an ideal signal  generator for WLAN testing of components, modules and devices.

EVM measurement: IEEE 802.11ac WLAN signal
Open Lightbox

EVM measurement: IEEE 802.11ac WLAN signal

High rate pulse (HRP) ultrawideband (UWB)

The R&S®SMM100A is ideal for HRP UWB receiver testing. The instrument covers the frequency range up to 10.6 GHz and with an RF modulation bandwidth of 500 MHz, signals can be generated on the most important channels.
  The R&S®SMM-K149 HRP UWB baseband option supports signal generation for three specified modes: HRP UWB from IEEE 802.15.4a-2015 as well as the BPRF mode and the HPRF mode for enhanced ranging devices (ERDEF) from IEEE 802.15.4z.

HRP UWB signal generation with R&S®SMM-K149
Open Lightbox

HRP UWB signal generation with R&S®SMM-K149

Available options

Frequency options
Product
Description
R&S®SMM-B1006

Order number 1440.9009.02

Description

100 kHz to 6 GHz

R&S®SMM-B1007

Order number 1440.9109.02

Description

100 kHz to 7.5 GHz

R&S®SMM-B1012

Order number 1440.9209.02

Description

100 kHz to 12.75 GHz

R&S®SMM-B1020

Order number 1440.9309.02

Description

100 kHz to 20 GHz

R&S®SMM-B1031

Order number 1440.9409.02

Description

100 kHz to 31.8 GHz

R&S®SMM-B1044

Order number 1440.9509.02

Description

100 kHz to 44 GHz

R&S®SMM-B1044N

Order number 1440.9609.02

Description

100 kHz to 44 GHz I/Q modulation bandwidth and minimum pulse width limited

R&S®SMM-B1044O

Order number 1441.0305.02

Description

100 kHz to 44 GHz

I/Q modulation bandwidth and minimum pulse width limited between 31.8 GHz and 37 GHz

Reference oscillator options
Product
Description
R&S®SMM-K703

Order number 1441.1301.02

Description

100 MHz, 1 GHz ultra low noise reference input/output

R&S®SMM-K704

Order number 1441.1318.02

Description

Flexible reference input (1 MHz to 100 MHz)

Analog modulation options
Product
Description
R&S®SMM-K22

Order number 1441.1330.02

Description

Pulse Modulator

R&S®SMM-K23

Order number 1441.1347.02

Description

High-Performance Pulse Generator

R&S®SMM-K24

Order number 1441.1353.02

Description

Multifunction Generator

R&S®SMM-K720

Order number 1441.1324.02

Description

AM/FM/PM

Other options
Product
Description
R&S®SMM-B90

Order number 1440.9709.02

Description

Phase Coherence

R&S®SMM-K553

Order number 1441.1147.02

Description

Frontend control

Baseband
Product
Description
R&S®SMM-B9

Order number 1440.9809.02

Description

Baseband generator with ARB (64 Msample, 120 MHz RF bandwidth)

R&S®SMM-K511

Order number 1441.1260.02

Description

ARB memory extension to 512 Msample

R&S®SMM-K17

Order number 1441.2143.02

Description

Differential analog I/Q outputs

R&S®SMM-K512

Order number 1441.1276.02

Description

ARB memory extension to 1 Gsample

R&S®SMM-K513

Order number 1441.2120.02

Description

ARB memory extension to 2 Gsample

R&S®SMM-K520

Order number 1441.2114.02

Description

Baseband real-time extension incl. CDM

R&S®SMM-K523

Order number 1441.2108.02

Description

Baseband extension to 240 MHz RF bandwidth

R&S®SMM-K524

Order number 1441.2095.02

Description

Baseband extension to 500 MHz RF bandwidth

R&S®SMM-K525

Order number 1441.2089.02

Description

Baseband extension to 1 GHz RF bandwidth

Baseband enhancements
Product
Description
R&S®SMM-K80

Order number 1441.2066.02

Description

Bit error rate tester

R&S®SMM-K507

Order number 1441.0934.02

Description

ARB Ethernet upload

R&S®SMM-K540

Order number 1441.2050.02

Description

Envelope tracking

R&S®SMM-K541

Order number 1441.2043.02

Description

AM/AM, AM/PM predistortion

R&S®SMM-K544

Order number 1441.2037.02

Description

User-defined frequency response correction

R&S®SMM-K548

Order number 1441.1130.02

Description

Crest factor reduction

Cellular
Product
Description

Order number 1441.1730.02

Description

5G NR Release 15

Order number 1441.2166.02

Description

5G NR Release 16

Order number 1441.1018.02

Description

5G NR Release 17/18

Order number 1441.1076.02

Description

5G NR sidelink

Order number 1441.1924.02

Description

LTE Release 8

Order number 1441.1882.02

Description

LTE Release 9

Order number 1441.1876.02

Description

LTE Release 10

Order number 1441.1847.02

Description

LTE Release 11

Order number 1441.1830.02

Description

LTE Release 12

Order number 1441.1776.02

Description

LTE Release 13/14/15

Order number 1441.1030.02

Description

U-Plane generation

Order number 1441.1818.02

Description

Cellular IoT Release 13

Order number 1441.1747.02

Description

Cellular IoT Release 14

Order number 1441.1247.02

Description

Cellular IoT Release 15

Order number 1441.2008.02

Description

3GPP FDD

Order number 1441.1899.02

Description

3GPP FDD HSPA/HSPA+, enhanced BS/MS tests

Order number 1441.2020.02

Description

GSM/EDGE

Order number 1441.2014.02

Description

EDGE Evolution

Order number 1441.1999.02

Description

CDMA2000® inkl. 1xEV-DV

Order number 1441.1982.02

Description

1xEV-DO Rev. A

Order number 1441.1853.02

Description

1xEV-DO Rev. B

Order number 1441.1960.02

Description

TD-SCDMA

Order number 1441.1953.02

Description

TD-SCDMA enhanced BS/MS tests

Order number 1441.1360.02

Description

5G NR Release 15 (WinIQSIM2™)

Order number 1441.2172.02

Description

5G NR Release 16 (WinIQSIM2™)

Order number 1441.1024.02

Description

5G NR Release 17/18 (WinIQSIM2™)

Order number 1441.1082.02

Description

5G NR sidelink (WinIQSIM2™)

Order number 1441.1601.02

Description

LTE Release 8 (WinIQSIM2™)

Order number 1441.1530.02

Description

LTE Release 9 (WinIQSIM2™)

Order number 1441.1524.02

Description

LTE Release 10 (WinIQSIM2™)

Order number 1441.1453.02

Description

LTE Release 11 (WinIQSIM2™)

Order number 1441.1447.02

Description

LTE Release 12 (WinIQSIM2™)

Order number 1441.1382.02

Description

LTE Release 13/14/15 (WinIQSIM2™)

Order number 1441.1424.02

Description

Cellular IoT Release 13 (WinIQSIM2™)

Order number 1441.1253.02

Description

Cellular IoT Release 14 (WinIQSIM2™)

Order number 1441.1230.02

Description

Cellular IoT Release 15 (WinIQSIM2™)

Order number 1441.1701.02

Description

3GPP FDD (WinIQSIM2™)

Order number 1441.1547.02

Description

3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)

Order number 1441.1724.02

Description

GSM/EDGE (WinIQSIM2™)

Order number 1441.1718.02

Description

EDGE Evolution (WinIQSIM2™)

Order number 1441.1682.02

Description

CDMA2000® inkl. 1xEV-DV (WinIQSIM2™)

Order number 1441.1676.02

Description

1xEV-DO Rev. A (WinIQSIM2™)

Order number 1441.1501.02

Description

1xEV-DO Rev. B (WinIQSIM2™)

Order number 1441.1653.02

Description

TD-SCDMA (WinIQSIM2™)

Order number 1441.1647.02

Description

TD-SCDMA enhanced (WinIQSIM2™)

Wireless connectivity
Product
Description

Order number 1441.1930.02

Description

IEEE 802.11a/b/g/n/j/p

Order number 1441.1860.02

Description

IEEE 802.11ac

Order number 1441.1753.02

Description

IEEE 802.11ax

Order number 1441.1053.02

Description

IEEE 802.11be

Order number 1441.1224.02

Description

DFS Signal Generation (R&S®Pulse Sequencer software DFS)

Order number 1441.1918.02

Description

Bluetooth® EDR

Order number 1441.1799.02

Description

Bluetooth® 5.x

Order number 1441.0886.02

Description

Bluetooth® 5.4 and channel sounding

Order number 1441.1160.02

Description

NFC A/B/F

Order number 1441.1760.02

Description

LoRa®

Order number 1441.1099.02

Description

HRP UWB

R&S®SMM-K114

Order number 1441.1824.02

Description

OFDM Signal Generation

Order number 1441.1618.02

Description

IEEE 802.11a/b/g/n/j/p (WinIQSIM2™)

Order number 1441.1518.02

Description

IEEE 802.11ac (WinIQSIM2™)

Order number 1441.1376.02

Description

IEEE 802.11ax (WinIQSIM2™)

Order number 1441.1060.02

Description

IEEE 802.11be (WinIQSIM2™)

Order number 1441.1599.02

Description

Bluetooth® EDR (WinIQSIM2™)

Order number 1441.1401.02

Description

Bluetooth® 5.x (WinIQSIM2™)

Order number 1441.0870.02

Description

Bluetooth® 5.4 and channel sounding (WinIQSIM2™)

Order number 1441.1499.02

Description

NFC A/B/F WinIQSIM2™

Order number 1441.1182.02

Description

LoRa® (WinIQSIM2™)

Order number 1441.1101.02

Description

HRP UWB (WinIQSIM2™)

R&S®SMM-K414

Order number 1441.1430.02

Description

OFDM Signal Generation (WinIQSIM2™)

Navigation
Product
Description

Order number 1441.1699.02

Description

GPS, 1 satellite (WinIQSIM2™)

Order number 1441.1476.02

Description

Modernized GPS, 1 satellite (WinIQSIM2™)

Order number 1441.1560.02

Description

Galileo, 1 satellite (WinIQSIM2™)

Order number 1441.1482.02

Description

Glonass, 1 satellite (WinIQSIM2™)

R&S®SMM-K423

Order number 1441.0928.02

Description

Modernized Glonass, 1 satellite (WinIQSIM2™)

Order number 1441.1460.02

Description

BeiDou 1 satellite (WinIQSIM2™)

Order number 1441.1176.02

Description

Modernized BeiDou, 1 satellite (WinIQSIM2™)

Order number 1441.1199.02

Description

IRNSS, 1 satellite (WinIQSIM2™)

Radar
Product
Description

Order number 1441.1153.02

Description

Pulse sequencing (option for R&S®Pulse Sequencer software)

Basic feature set for simulating radar signals on an external PC with R&S®Pulse Sequencer software.

Order number 1441.1201.02

Description

Enhanced pulse sequencing (option for R&S®Pulse Sequencer software)

Adds simulation capabilities for emitters and receiver, including antenna patterns and antenna scans

Broadcast
Product
Description

Order number 1441.1630.02

Description

DVB-H/DVB-T (WinIQSIM2™)

Order number 1441.1624.02

Description

DAB/T-DMB (WinIQSIM2™)

SatCom
Product
Description

Order number 1441.1418.02

Description

DVB-S2 / DVB-S2X (WinIQSIM2™)

Order number 1441.0905.02

Description

DVB-RCS2 (WinIQSIM2™)

Order number 1441.0911.02

Description

DVB-S2X Annex E (WinIQSIM2™)

Waveform package
Product
Description
R&S®SMM-K200

Order number 1441.1124.71

Description

1 waveform for signals from R&S®WinIQSIM2™

R&S®SMM-K200

Order number 1441.1124.72

Description

5 waveform for signals from R&S®WinIQSIM2™

R&S®SMM-K200

Order number 1441.1124.75

Description

50 waveform for signals from R&S®WinIQSIM2™

Multi carrier CW and noise
Product
Description
R&S®SMM-K61

Order number 1441.1901.02

Description

Multicarrier CW Signal Generation

R&S®SMM-K62

Order number 1441.2072.02

Description

Additive white Gaussian noise (AWGN)

R&S®SMM-K261

Order number 1441.1582.02

Description

Multicarrier CW Signal Generation (WinIQSIM2™)

R&S®SMM-K262

Order number 1441.1576.02

Description

Additive white Gaussian noise (AWGN) (WinIQSIM2™)

R&S®SMM-K811

Order number 1441.1047.02

Description

Notched signals for noise power ratio measurements, R&S®SMM-B9 required

Extras
Product
Description
R&S®SMM-B93

Order number 1440.9996.02

Description

Solid-state drive

R&S®SMM-K980

Order number 1441.1118.02

Description

HUMS

Health and Utilization Monitoring Service

R&S®ZZA-KN4

Order number 1175.3033.00

Description

19" rack adapter for mounting a 19" housing 4 RU high in a standard 19" rack

R&S®SMU-Z6

Order number 1415.0201.02

Description

Cable for standard I/Q Interface, 2 m

R&S®TS-USB1

Order number 6124.2531.00

Description

USB serial adapter for RS-232 remote control

R&S®DIGIQ-HS

Order number 3641.2948.03

Description

Cable for HS digital I/Q interface, 3 m

Documentation
Product
Description
R&S®DCV-2

Order number 0240.2193.18

Description

Documentation of Calibration Values

R&S®ACASMM100A

Order number 3598.6993.03

Description

R&S®SMM100A accredited calibration, for instruments with R&S®B1006 6 GHz frequency option

R&S®ACASMM100A

Order number 3598.7019.03

Description

R&S®SMM100A accredited calibration, for instruments with R&S®B1007 7.5 GHz frequency option

R&S®ACASMM100A

Order number 3598.7002.03

Description

R&S®SMM100A accredited calibration, for instruments with R&S®B1012/-B1020/-B1031/-B1044/ -B1044N 12.75 GHz/20 GHz/31.8 GHz/44 GHz frequency options

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.