1C105: Configuration of the R&S CMW for Bluetooth Low Energy Direct Test Mode

This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established.

The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.

Name Type Language Version Date Size
1C105_1e_Bluetooth_LE_DirectTestMode.pdf Application Note English 1e 08.02.2017 550 kB
International Website