CMA180 - Demodulator output to AFx-Out

Question

I want to use a separate oscilloscope for audio measurements on my CMA180 and unfortunately found no way to provide the demodulator output except the PHONES plug.

If I occupy this port, I will no longer be in the situation, to listen to the signal while measuring. Is it possible to provide that signal also on one of the two AFx OUT ports?

Answer

While working in the "Expert Mode" the demodulated signal can be easily put to the desired ports:

Change to the "Analyzer" TAB
Press the "Play" button
Open the analzer setting by clicking on the cogwheels in the right lower corner
Change to the "AF Settings" TAB
Change to the "AF" TAB on tghe lower line of the "AF Settings"
Enable the "AF1 OUT" switch
The AF signal is present on the AF1 OUT port from this moment on. All the AF measurements and the audio output on the CMA180 can still be used.