Ready to push boundaries in the H band? Discover how you can extend the frequency range of your signal and spectrum analyzers to 220-330 GHz with Rohde & Schwarz.
Partnership video: R&S and IPTE collaborate on 5G TCU production testing
Find out how the collaboration between Rohde & Schwarz and IPTE enables TCU vendors to bridge the gap between product development and validation to and automated production.
Configuring Closed-Loop Power Control on the SMA100B
Learn how to configure and use closed-loop power control on Rohde & Schwarz analog and vector signal generators based on the example of the R&S®SMA100B .
Use zone trigger to define trigger events graphically, also on your math signals. See how you can use this standard and unique capability on MXO oscilloscopes to trigger on specific events on your math signal.
Use zone trigger to define trigger events graphically, also in the frequency domain. See how you can use this standard and unique capability on MXO oscilloscopes to trigger on certain events in the frequency domain.
First responders' lifeline: How to verify and optimize MCX network performance
The presentation highlights MCX performance testing using Rohde & Schwarz's methods to ensure safe broadband migration and protect first responders by identifying network issues early.
NB-NTN module application from module supplier perspective (IoT/Automotive)
This talk is about Murata showcases advancements in NB-NTN modules and future wireless connectivity, exploring applications and trends in licensed and unlicensed bands.
This talk explores the potential for accelerating and optimizing the traditional RAN protocol standardization process using an ML-based framework that enables independent radio nodes to autonomously develop performance-driven communication protocols.
This presentation explores the need for seamless Wi-Fi and 5G interworking, covering approaches like Hotspot 2.0, AT3S, and related testing and certification.
This presentation examines 5G performance beyond benchmarks, focusing on indoor propagation and altitude impacts on coverage, capacity, and user experience.
Business critical Campus Networks, the operator perspective
This talk explores the role of 5G Campus Networks in accelerating digitalization through tailored architectures and advanced monitoring solutions to meet business-critical application demands and stringent SLA requirements.
Navigating the 5G evolution by connecting industrial IoT with Modern Supply Chain
This talk is a demonstration of how private 5G is building the connectivity bridge, between Modern Supply Chain requirements and the real-time industrial IoT applications to feed those.
The presentation will guide the audience on a journey into the different dimensions through which energy efficiency can be achieved in a radio access network.
This talk addresses the energy consumption trends of telecommunication networks in Germany, highlighting the increasing role of wireless technologies, the need for a life-cycle assessment of emissions, and more.
The presentation explores self-powered wireless IoT sensors using energy harvesting, highlighting implementations, performance, and use cases for optimized industrial processes.
How to qualify devices without accessible antenna ports according to RED and FCC
Many IoT and connected devices rely on wireless technology, such as Wi-Fi. Their compact design often excludes an accessible antenna port, creating an additional test challenge when it comes to demonstrating compliance with RED or FCC regulations.
In this video, we dive into amplifier linearity & stauration checks based on IEC 61000-4-3 & IEC 61000-4-6 standard using R&S®ELEKTRA in simulation mode. We will briefly walk you through the clauses mentioning about linearity & saturation checks in standards.
In this video, we dive into conducted immunity testing based on IEC 61000-4-6 standard using Elektra in simulation mode.We will briefly walk you through the CDN & BCI testing methods stated in the standards.
Learn about the upgraded features of the R&S®SMB100B microwave signal generator including low SSB, high output power, low harmonics and closed-loop power control.
Product video: R&S®RadEsT – The essential in radar testing
The R&S®RadEsT automotive radar essential tester is provides OEMS and Tier 1s with dynamic and precise target generation for debugging of reference designs and software.
Application video: Low-ESL/ESR measurements of DC-Link capacitors
This video shows how you can precisely characterize the ESR and ESL of electric vehicle traction inverter DC-link capacitors over a frequency range of interest using the Zurich Instruments MFIA impedance analyzer.
Don't miss the latest version of the passive monitoring tool R&S®AVQA from Rohde & Schwarz. Thanks to new features, monitoring voice quality in your network is becoming much more easy.
Understand the decentralized high redundant architecture of the full IP CERTIUM VCS system providing maximum availability and flexibility for all customer needs.
Application video: Dürr and R&S solution for ADAS/AD functional testing for EOL and PTI
Dürr and R&S have developed an innovative, cost-effective solution for over-the-air (OTA) vehicle-in-the-loop (VIL) ADAS/AD testing. This solution validates conformity and effectiveness during end-of-line (EOL) testing or periodical technical inspection (PTI).
R&S®TSMx scanners provide a maximum degree of freedom and upgradeability for efficient walk and drive test campaigns. Watch this video to learn more about R&S®TSMx capabilities.
Product video: Transition seamlessly to radar production with the AREG-P target generator
Watch this video to discover the innovative capabilities of the AREG-P target generator, including parallel testing which bring CAPEX, OPEX, yield and througput benefits.
Discover the key features, benefits and integration capabilities of the R&S®FE170ST/SR, as well as how which real-world applications these frontends support.
Embedding & Equalization with the R&S RTP Oscilloscope (Part 2)
Learn how easy it is to configure a cable emulation within the Embedding setup dialog. For interface standards such as USB, necessary S-parameter files are included in the oscilloscope software.
Embedding & Equalization with the R&S RTP Oscilloscope (Part 3)
The Eye Diagram is an effective tool to validate signal integrity. This video compares the eye diagram on a signal acquired at the output of a USB transmitter versus a waveform with some added cable emulation.
Embedding & Equalization with the R&S RTP Oscilloscope (Part 4)
Learn how easy it is to configure a equalizer emulation within the Equalizer setup dialog. For interface standards such as USB, PCIe or DP, the necessary S-parameter files are included in the oscilloscope software.
RTP Oscilloscopes with External Frontends (Part 1)
The R&S FE External Frontends extend the frequency range of the RTP Oscilloscope up to 170 GHz. No additional equipment is needed for this compact and fully calibrated solution. Learn how easy it is to configure a external frontend directly by the RTP GUI.
RTP Oscilloscopes with External Frontends (Part 2 )
The R&S RTP oscilloscope offers a comprehensive set of tools for analysing widebad RF signals together with the external frontends downconverted. Start with powerful trigger events, responsive spectrum analysis or the unique IQ mode to prepare in depth signal analysis.
.
RTP Oscilloscopes with External Frontends (Part 3 )
The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis. This video demonstrates how easy the VSE software can analyze a 5G FR2 signal that was captured and downconverted by the FE44S external frontend and acquired by the RTP oscilloscope.
RTP Oscilloscopes with External Frontends (Part 4 )
The RTP oscilloscope can use up to 4 external frontends to acquire the respective IF signals for further analysis. Here we use two FE44S external frontends to test a 5G FR2 signal at 28 GHz. Signal analysis is performed by the R&S VSE software running directly on the RTP oscilloscope.
RTP Oscilloscopes with External Frontends (Part 5 )
Use the R&S RTP Oscilloscope with the R&S External Frontend FE110SR to debug your automotive radar devices. This example demonstrates the analysis of a bursted radar chirp signal with the FFT and Spectrogram. Analysis with the R&S VSE software and the Transient option enhances the characterization of radar signals. Additionally, the acquisition of two FE110SR signals with a maximum bandwith of 10 GHz in a frequency range of 70 to 110 GHz is possible the RTP oscilloscope.
This video shows you how you can better place and stabilize your probes using the the Rohde & Schwarz 2D positioner for passive probes and the 3D positioner for other probes.
Quickly and reliably trigger and decode packets from your I2C bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
Quickly and reliably trigger and decode packets from your LIN bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
This video shows how you can use the MXO Series K36 Frequency Response Analysis option to characterize the frequency response of your electric devices.
PAM-N Analysis with the R&S RTP Oscilloscope (Part 2)
Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.
