1000BASE-T1 Ethernet

Compliance test

1000BASE-T1 Ethernet Compliance Test
Open Lightbox
1000BASE-T1 Ethernet Compliance Test

Key facts

  • Test solution of 1000BASE-T1 Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Meets IEEE 802.3bp specification
  • Complete test solution including fixture and clock divider
  • R&S oscilloscopes | Engineered for multi-domain challenges
  • R&S oscilloscopes | High definition mode | See more with up to 16-bit resolution

Oscilloscope software

The R&S®RTO-K87 and R&S®RTP-K87 options offer an automated test solution for 1000BASE-T1 according to the IIEEE 802.3bp specification. The test wizard guides the user via illustrated step-by-step instructions. The complete test solution includes fixture and clock divider. The R&S Scope Suite runs on scope or separate PC.

Features & benefits

Includes all relevant tests

The complete test solution covers all relevant test cases of the IEEE 802.3bp specification for the1000BASE-T1. A test fixture is available for signal access via a differential probe for accurate signals.

Oscilloscope-Software-1000BASE-T1-Ethernet-Compliance
Open Lightbox

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The
limit editor lets you individually adjust standard-specific test limits.

Open Lightbox

Ease-of-use with guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and the device under test. This increases the ease-of-use and reduces potential setup errors.

Strong reporting functionality

The test results are fully documented in a report created by the R&S®ScopeSuite. Depending on the user’s preference, the test report can include numerical result data or oscilloscope screen shots. The available output formats are PDF, DOC and HTML.

Open Lightbox

Detailed report including setup parameters, measurement results and screenshots

Test solution includes oscilloscope, VNA, Waveform generator and test fixtures

The compliance test setup includes test cases that need a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

Open Lightbox

Available models


  • Option Name

    R&S®RTO-K87

    Order number 1337.8591.02

    Serial Standard
    1000BASE-T1
    Decode Table
    Trigger
    Label Support
    Base unit
  • Option Name

    R&S®RTP-K87

    Order number 1800.6554.02

    Serial Standard
    1000BASE-T1
    Decode Table
    Trigger
    Label Support
    Base unit

Available Options

Software options
Product Description
RTO-K17 High Definition

R&S®RTO-K17

Order number 1329.7419.02

Description

High definition mode

Extras
Product Description
RT-ZF2 Ethernet Test Fixture

R&S®RT-ZF2

Order number 1317.5522.02

Description

Test fixture set for 10M/100M/1G/10G-Base-T ethernet compliance test

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet. Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

RT-ZF6 Frequency Converter Board

R&S®RT-ZF6

Order number 1337.8579.02

Description

Frequency converter board

for 1000BASE-T1 compliance test

R&S®RTO-B4

Order number 1304.8305.02

Description

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

RTO-B6 Arbitrary Waveform Generator

R&S®RTO-B6

Order number 1329.7054.02

Description

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

Order number 1328.5312.02

Description

Full Test Set, Base Unit, bidirectional,  4.5GHz

RT-ZD30 Active differential probe

R&S®RT-ZD30

Order number 1410.4609.02

Description

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

Application videos

1000Base-T1 compliance testing

1000Base-T1 compliance testing

Guideline for 1000Base-T1 compliance testing using the R&S®RTO and R&S®ZND.

More details

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 2: MDI jitter and clock frequency

More details

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 5: Transmitter power spectral densityy (PSD), power level and peak differential output

More details

1000BASE-T1 Compliance Testing Test Mode 6: Maximum output droop

1000BASE-T1 compliance testing

Test mode 6: Maximum output droop

More details

1000BASE-T1 Compliance Testing Test Mode 4: Transmitter Distortion Test with Disturber

1000BASE-T1 compliance testing

Test mode 4: Transmitter distortion test with disturber

More details

Oscilloscope portfolio

Oscilloscopes

Oscilloscopes that fit your requirements and your budget, from top value to top performance.

More information

Oscilloscope software

Select from a wide range of protocol triggering and decode apps, compliance testing apps, and analysis software.

More information

Oscilloscope probes

Customize your oscilloscope with the right probes and accessories for your application.

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

I want to receive information from Rohde & Schwarz via

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.