Software and accessories for Network Analyzer
Rohde & Schwarz provides additional functionalities via software and a wide range of accessories for better network analyzers.Software
-
Platform for automated VNA tests
-
All the functions of a VNA on your PC
Accessories
-
- R&S®ZN-Z1xx: 50 Ohm O/S/M/T “4-in-1” design, male or female, up to 44 GHz
-
- R&S®ZV-Z1xx: 50 Ohm O/S/M/T “4-in-1” design, male or female, up to 40 GHz
-
- R&S®ZCAN: 50 Ohm or 75 Ohm, O/S/M/T as single components male and female, 3 GHz
-
- R&S®ZN-Z2xx: 50 Ohm new high end manual calibration kit series, up to 67 GHz
-
- R&S®ZV-Z2xx: 50 Ohm high end manual calibration kit series. Up to 110 GHz
-
- R&S®ZV-WRxx: wave guide calibration kits, up to 500 GHz
-
- R&S®ZV-Z4xx: High-end verification kits, full VNA measurement uncertainty verification, 50 Ohm, up to 50 GHz
- R&S®ZV-Z3xx: The R&S T-Check, the fast and economic solution to check VNA measurement uncertainty with a single measurement.
-
- R&S®ZN-Z151: 2 ports, 8.5 GHz, SMA(f), N(f), 3.5mm(f)
- R&S®ZN-Z152: 6 ports (front), 8.5 GHz, SMA(f)
- R&S®ZN-Z153: 4 ports (front), 8.5 GHz, SMA(f)
- R&S®ZN-Z154: 6 to 24 ports (front), 8.5 GHz, SMA(f)
- R&S®ZN-Z156: 2 ports, 5 GHz to 67 GHz
-
- R&S®ZN-Z5x: Models from 9 kHz to 50 GHz, 2 or 4 test ports
- R&S®ZN-Z51: Mixed connector types as options available
-
- R&S®ZV-Z53 *. 75: 2 ports, 3 GHz, 75 Ohm
- R&S®ZV-Z58: 8 GHz, 8 ports, 3.5mm(f) or N(f)
- R&S®ZV-Z59 20 GHz, 6 ports, 3.5mm(f)
-
- R&S®ZN-Z30: Controller Unit for R&S®ZN-Z32, R&S®ZN-Z33
- R&S®ZN-Z32: Inline Calibration Unit 8.5GHz
- R&S®ZN-Z33: Inline Calibration Unit 40GHz (standard and TVAC model)
-
- R&S®ZV-Z9x: High-end test cables, ruggedized connectors, armored construction for exceptional breakdown withstand to crush forces
-
- R&S®ZV-Z19x: High-end test cables, lightweight, bending resistance combined with virtually no springback
-
- R&S®ZN-ZTW Torque Wrenches, from 0,34 Nm to 1,5 Nm
Small Components Accessories
Overview of Small Components Accessories for Network Analyzer from Rohde & Schwarz
-
R&S®DNF Attenuator
0 Hz to 12.4 GHz, m/f
x = 0: 3 dB, 2 W
x = 1: 6 dB, 2 W
x = 2: 10 dB, 1 W
x = 3: 20 dB, 1 W
x = 4: 30 dB, 1 W -
R&S®RBU50 High-Power Attenuator, 50 W
0 Hz to 2 GHz
-
R&S®RBU100 High-Power Attenuator, 100 W
0 Hz to 2 GHz
-
R&S®RDL50 High-Power Attenuator, 50 W
0 Hz to 6 GHz, 20 dB
-
R&S®ZN-B13 50 Ohm broadband limiter
30 MHz to 6000 MHz
-
R&S®RNA Precision Termination, 75 Ω
1 W, DC to 3 GHz, N (m)
-
R&S®RNB Termination, 50 Ω
1 W, DC to 4 GHz, N (m)
-
R&S®RAU UHF Termination , 50 Ω
0 Hz to 2 GHz, 100 W, N (f)
-
R&S®RAD Feedthrough Termination, 50 Ω
0.5 W, DC to 1 GHz, BNC (m/f)
-
R&S®RAD50 Feedthrough Termination, 50 Ω
2 W, DC to 500 MHz, BNC (m/f)
-
R&S®RAM Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
-
R&S®RAZ Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
-
R&S®RAZ Matching Pad 50/75 Ω, series resistor 25 Ω
0 Hz to 3.3 GHz
-
R&S®DVS Power Splitter/Combiner
0.1 MHz to 400 MHz, 1 W, 50 Ω , BNC (f)
-
R&S®RVZ Power Splitter, 2 x 50 Ω
0 Hz to 2.7 GHz
-
R&S®DVU4 Four-Port Junction Box
0 Hz to 1 GHz, 0.25 W into 50 Ω per input,
4 x Dezifix B or 4 x N (f)
-
R&S®ZV-Z1227 2-way Wilkinson power divider
4 GHz to 27 GHz
-
R&S®ZV-Z1228 Pulsar 4-way power divider, 5 GHz to 27 GHz
5 GHz to 27 GHz
-
R&S®ZV-Z1118 Adapter SMA m/m angle
0 Hz to 18 GHz
-
R&S®ZV-Z1218 Adapter SMA m/f angle
0 Hz to 18 GHz
-
R&S®ZV-Z61 Bias Network
2 MHz to 4 GHz
-
R&S®WCA70 Waveguide Coax Adapter, WR15 to 1.85 mm (male)
50 GHz to 75 GHz
-
R&S®WCA75 Waveguide Coax Adapter, WR15 to 1 mm (f)
50 GHz to 75 GHz
-
R&S®WCA75 Waveguide Coax Adapter, WR15 to 1 mm (m)
50 GHz to 75 GHz
-
R&S®WCA90 Waveguide Coax Adapter, WR12 to 1 mm (f)
60 GHz to 90 GHz
-
R&S®WCA90 Waveguide Coax Adapter, WR12 to 1 mm (m)
60 GHz to 90 GHz
-
R&S®WCA110 Waveguide Coax Adapter, WR10 to 1 mm (f)
75 GHz to 110 GHz
-
R&S®WCA110 Waveguide Coax Adapter, WR10 to 1 mm (m)
75 GHz to 110 GHz
-
NWA_Handbook-en Network Analysis Handbook (English)
"Fundamentals of Vector Network Analysis"
-
NWA_Handbook-de Network Analysis Handbook (German)
"Grundlagen der Vektoriellen Netzwerkanalyse"
-
(for control of external devices via IEC/GPIB or LAN)
-
(for control of external devices via IEC/IEEE bus)
-
For operation with R&S®NRP2 base unit or via USB on a Laptop/PC