Rohde & Schwarz Knowledge+

Login or register to gain full access to the Knowledge+ platform!

I want to create an account

Register
or

I already have an account

Login
background
RS-Logo RS-Logo Mini
Choose Location
Customer portal
Back
Aerospace and defense
Back Overview Aerospace and defense
Air
Land
Sea
Cyber
Space
Multi-domain
Industry partners
Automotive testing
Back Overview Automotive testing
Automotive connectivity and infotainment
Automotive EMC and full-vehicle antenna testing
Automotive radar
Electric drivetrain component testing
In-vehicle networks and ECU testing
Countering drones
Back Overview Countering drones CUAS for critical infrastructure operators CUAS for law enforcement CUAS for military operations
Critical infrastructure
Back Overview Critical infrastructure Air navigation testing
Broadcast distribution
Cellular network investigations Civil air traffic control
Mobile network testing
Networks and cybersecurity Security screening Spectrum monitoring Spectrum regulation
Electronics testing
Back Overview Electronics testing Consumer electronics testing
Digital design testing
EMC testing
High-speed digital interface testing
Medical device testing
Power electronics testing
RF and microwave components
Networks and cybersecurity
Back Overview Networks and cybersecurity Cybersecurity for aerospace and defense Cybersecurity for the financial industry R&S®ComSec Secure networks and cybersecurity for public authorities Secure networks for commercial business Secure networks for healthcare
Research and education
Back Overview Research and education 6G research Antenna research Material characterization Particle acceleration Quantum technology Teaching lab solutions
Satellite testing
Back Overview Satellite testing 5G NTN satellite testing Satellite ground station testing and operation Satellite in-orbit testing Satellite payload and bus testing Satellite user terminal testing
Security
Back Overview Security
Governmental security
Networks and cybersecurity
Security screening
Wireless communications testing
Back Overview Wireless communications testing EMC and regulatory testing
IoT / M2M testing
Mobile device testing
Mobile network infrastructure testing
Wireless standards
Back
Test and measurement
Back Overview Test and measurement
Amplifiers
Analyzers
Antenna test systems and OTA chambers
Automotive radar testers
EMC test equipment
Mobile network testing
Oscilloscopes
Power supplies and source measure units
Quality control & inspection scanner
R&S®ESSENTIALS test equipment
RF and microwave power meters
Signal generators
System components
Wireless device testers and systems
Broadcast and Media
Back Overview Broadcast and Media
Broadcast Distribution
Media Technologies
Aerospace | Defense | Security
Back Overview Aerospace | Defense | Security
Radiomonitoring
Secure communications
Security scanner
Cybersecurity
Back Overview Cybersecurity Endpoint security Management systems Network encryptors Secure web browser
Back
Service
Back Overview Service Calibration services Repair services Service coverages
Service level agreement
Support
Back Overview Support Downloads R&S®Instrument Manager R&S License Manager Resource Library Service & sales Locator Technology Academy
My Rohde & Schwarz Service & support request
Back Knowledge+ Events Downloads Videos Webinars Technology Academy
Technology fundamentals
Back Overview Technology fundamentals Antennas for mobile and stationary use Hopper signals Monitoring receiver skills Radio direction finding techniques Signal analysis methods
Back
About Rohde & Schwarz
Back Overview About Rohde & Schwarz Compliance Electronic Manufacturing Services High vertical integration Our history
Sustainability
Rohde & Schwarz United Arab Emirates
News & media
Back Overview News & media NEWS Magazine Press & media contacts Press room
R&S Magazine
Back Overview R&S Magazine Shaping the future of connectivity Quantum technology Wi-Fi on Mars From insight to impact GPS backup Podcast Behind Innovation Artificial Intelligence Protection of critical infrastructures
Back Overview Jobs Professionals College and university students High school students Culture Events Contact

Download Center

Find product information, manuals, expert insights, and the latest software updates all in one place.

90 Results

Filters
Relevance
  • Relevance
  • Date
Back
Filter search results
Products
  • R&S®SMU200A
Technical documentation
Firmware and Software
Product information
Language

Learn more about our solutions on our website.

Search our site (3655)
RSCommander

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24‏/12‏/2017

R&S®VISA

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

English - 26‏/05‏/2020

R&S®SMU200A Vector Signal Generator Quick Start Guide

Provides the information required to prepare the instrument for use and start working.

English - 28‏/01‏/2016

R&S®nnn-K6 Pulse Sequencer software manual

Describes the specific functions of the application.

English - 04‏/02‏/2016

R&S MATLAB® Toolkit for Signal Generators

The R&S MATLAB® Toolkit for Signal Generators provides routines for remote controlling these instruments. Additional MATLAB® scripts turn I/Q vectors into the Rohde & Schwarz waveform file format for use with an ARB. This application note describes the installation and use of the R&S MATLAB® Toolkit on Microsoft Widows and Linux based systems.

English - 25‏/04‏/2013

VAMOS Technology Introduction

Existing GSM mobile communication systems have the potential to double voice capacity by adding the “Voice services over Adaptive Multi-user channels on One Slot” (VAMOS) feature as specified in the 3rd Generation Partnership Project (3GPP) GSM/EDGE Radio Access Network (GERAN) Release 9 specifications. This application note describes the VAMOS feature from an air interface perspective in detail and specifically illustrates the VAMOS testing solution offered by Rohde & Schwarz test equipment.

English - 16‏/08‏/2011

LTE-A Base Station Transmitter Tests

3GPP TS36.141 defines conformance tests for EUTRA base stations (eNodeB). Release 14 added several tests, especially for enhanced License Assisted Accsess (eLAA).This application note describes how all required transmitter (Tx) tests (TS36.141 Chapter 6) can be performed quickly and easily by using signal and spectrum analyzers from Rohde & Schwarz. A few tests additionally require signal generators from Rohde & Schwarz.Examples illustrate the manual operation. A free software program enables and demonstrates remote operation.The LTE base station receiver (Rx) tests (TS36.141 Chapter 7) are described in Application Note 1MA195.The LTE base station performance (Px) tests (TS36.141 Chapter 8) are described in Application Note 1MA162.

English - 11‏/05‏/2016

RF chipset verification for UMTS LTE (FDD) with R&S®SMU200A and R&S®FSQ

This application note describes how to verify and validate a LTE (FDD) RF chipset using R&S® SMU200A vector signal generator, R&S® FSQ signal analyzer and R&S® EX-IQ Box. The related signal generation as well as signal analysis is described

English - 19‏/12‏/2008

DVB-T - Bursted Noise Signal Generation

DVB-T Bursted Noise is a tool for generation of DVB-T compatible noise signals. The IQ data can tranferred to WinIQSIM™ / WinIQSIM2™ for further processing and transmission to an AMU, AFQ, AMIQ, SMU, SMIQ.

English - 08‏/07‏/2009

WLAN Tests According to Standard 802.11a/b/g

The Application Note summarises all measurements for WLAN test, according to the IEEE Standards 802.11a, b and g. For each measurement, an instrument list, test setups, test method, comments, typical results and implementation hints are included. The enclosed free of charge software provides all IEEE 488 bus sequences ready to run or copy into your own test environment.

English - 28‏/07‏/2004

Measurements on RFID Components According to ISO/IEC 14443 Standard

This Application Note describes measurements on RFID readers and chipcards according to ISO/IEC 14443 and similar standards, using a signal generator and a spectrum analyzer. Using a modern spectrum analyzer like the R&S®FSL not only increases accuracy and measurement speed, but also simplifies operation. Interoperability tests, in particular, are simplified by generating reader test signals with a signal generator. With software option R&S®SMx/AMU/AFQ-K6 chipcards can be tested without a reader

English - 25‏/01‏/2010

Polar Modulation with R&S®SMU200A

Polar modulation is a method where digital modulation is realized as a combination of phase and amplitude modulation, rather than using an I/Q modulator. This technique becomes increasingly important in mobile communication. This application note shows how to generate polar modulation with an R&S®SMU200A Vector Signal Generator.

English - 26‏/11‏/2004

W-CDMA Base Station Receiver Tests According to TS25.141 Rel. 10

3GPP TS25.141 defines conformance tests for W-CDMA base stations (including HSPA+ features). This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz. One test additionally requires a spectrum analyzer from Rohde & Schwarz.Example illustrates manual operation. A free software program enables and demonstrates remote operation. The W-CDMA base station transmitter (Tx) tests (TS25.141 Chapter 6) are described in Application Note 1MA67.

English - 21‏/10‏/2014

Convert NMEA 0183 to waypoint files for R&S®SMU200A

This application note describes how to convert GPS routes from NMEA 0183 file format to waypoint files that can be used by the R&S®SMU200A Vector Signal Generator.

English - 26‏/09‏/2008

Generation of IEEE 802.15.4 Signals

This application note describes how to create and generate standard-conform IEEE 802.15.4 test signals with the Rohde & Schwarz Vector Signal Generators (VSG).

English - 08‏/01‏/2016

Importing Data in ARB, Custom Digital Modulation and RF List Mode

The foregoing application note is intended for everyone who desires to become more familiar with the use and upload of custom data in ARB, digital modulation and RF list mode. Particularly, this note describes the instruments R&S® SMW200A, R&S® SGT100A, R&S® SMBV100A, R&S® SMU200A, R&S® SMJ100A and R&S® SMATE200A and provides an overview of already available solutions as well as it gives hints for the writing of own applications. Please also see the application note 1GP88 for the ARB Toolbox software and the application note 1GP96 for the CDM-Toolbox software.

English - 21‏/12‏/2010

Transmitter Tests in Accordance with the CTIA Plan for Wi-Fi Mobile Converged Devices

In response to the growing number of WLAN modules that also support a cellular network (converged devices), CTIA published a plan with new tests in August 2006 that certifies Wi-Fi conformance. This Application Note first addresses the transmitter tests of the CTIA plan. For these tests Rohde&Schwarz offers preprogrammed instrument setups. They enable you to perform the measurements on the WLAN test set easily and quickly. Moreover, this Application Note shows how you can check the spectrum transmit mask defined for OFDM by means of only one keystroke on the Rohde&Schwarz spectrum analyzers.

English - 11‏/10‏/2006

IQWizard - IQ Signal Measurement and Conversion

IQWizard is a tool for loading IQ signal files in various formats and measuring IQ signals with a FSx spectrum analyzer or ESx Receiver. The obtained IQ data in memory can be stored in various formats or be transmitted to an R&S® vector signal generator with WinIQSIM™ or WinIQSIM2™.

English - 25‏/04‏/2013

Measurement of WLAN 802.11 ac signals

This application note provides a guide through the measurements for IEEE 802.11ac WLAN transmitter signals using the general purpose OFDM analysis software R&S FS-K96. Step-by-step instructions for performing the measurements are provided and the different result types available with the FSK96 Software are discussed.

English - 21‏/09‏/2011

Firmware for R&S®SMU200A vector signal generator

English - 20‏/08‏/2019

Testing LTE-Advanced

LTE-Advanced comprises multiple features enhancing the basic LTE technology firstly specified in 3GPP Release 8. LTE including the LTEAdvanced improvements was approved by ITU to comply with IMT-Advanced requirements and thus being a true 4G mobile communication system. The different technology components of LTE-Advanced have different market priorities and require different testing strategies. This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.

English - 03‏/09‏/2014

WiMAX Power Amplifier Testing

This appication note introduces a program suitable for generating and analyzing WiMAX IEEE 802.16 signals for power amplifier testing. The program allows the user to change the generator settings, to select specific pre-defined test parameters and to analyze the test results. The application note describes the test parameters and the features and capabilities of the program.

English - 03‏/08‏/2007

Generation and Analysis of ZigBee™ IEEE802.15.4 signals in the 2.4 GHz band

IEEE 802.15.4 (ZigBee™) uses OQPSK with a half-sine pulse shaping filter as modulation. This application note describes how to generate and analyze ZigBee™ signals. Simple test signals can be setup with the free-of-charge simulation software R&S WinIQSIM™ and transferred to the vector signal generator R&S SMU200A. It describes how to setup the vector signal analyzer R&S FSQ with option R&S FSQ-K70 for ZigBee™ signal demodulation and how to analyze modulation quality such as error vector magnitude (EVM).

English - 21‏/06‏/2007

Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

English - 20‏/12‏/2012

Remote Operation of R&S Instruments Using Remote Desktop Connection via LAN

Rohde & Schwarz instruments can be shared when users wish to use the same instrument. This can be done quite easily with the LAN interface, which comes as a standard option. Through this interface, Rohde & Schwarz instruments can be connected directly to a network, and users with access to the network can manually operate the instrument from a remote computer. This Application Note lists all instruments that support these features and describes the steps necessary to set up and configure the network connection to operate these instruments remotely.

English - 05‏/07‏/2007

Software for R&S®SMU200A vector signal generator

English - 02‏/10‏/2017

R&S®nnn-K63 SMx RF and Baseband Correction Toolkit software manual

Describes the specific functions of the software.

English - 08‏/08‏/2008

Assisting Tools for Operation of Windows-Based T&M Instruments

Software tools allow to make the control of T&M instruments more convenient. The adoption of the following tools for Windows®-based T&M instruments is described: ● Synergy:One mouse and one keyboard control a group of T&M instruments ● CamStudio:Video clips of the display of a T&M instrumentare recorded during operation

English - 13‏/06‏/2013

How to use Rohde & Schwarz Instruments in MATLAB

This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB:The first one uses VISA connection and direct SCPI commands.The second approach takes advantage of Rohde & Schwarz VXI plug&play instrument drivers and MATLAB Instrument Control Toolbox.

English - 12‏/06‏/2017

CDMA2000 Base Station Tests With the R&S®SMU200A Vector Signal Generator and Rohde & Schwarz Spectrum Analyzers

This Application Note describes measurements compliant with the CDMA2000 base station standard described in 3GPP2 C.S0010-C v2.0 / TIA/EIA-97-F-1. The primary focus is on solutions for generating and analyzing CDMA2000 signals. The special characteristics that make the selected signal generators and signal analyzers highly suitable for this purpose are detailed, and remote control programming is demonstrated by means of a free-of-charge program.

English - 15‏/09‏/2009

background
facebook
youtube
feed
LinkedIn
instagram
Rohde & Schwarz Emirates L.L.C.
Rohde & Schwarz is striving for a safer and connected world with its leading-edge solutions. Committed to innovation for more than 90 years, the independent technology group acts long-term and sustainably, making it a reliable partner to its industry and government customers worldwide. Rohde & Schwarz Emirates L.L.C, founded in 1994, is a partnership venture between Rohde & Schwarz Germany and Capital Investment UAE.
Address

HQ Aldar Building, 2nd Floor Al Raha Beach

Abu Dhabi

United Arab Emirates

Contact

+971 2 4926299

info.rsemir@rohde-schwarz.com

© 2026 Rohde & Schwarz

  • Cookie Information
  • Imprint
  • Statement of Privacy
  • Terms & conditions
  • Jobs & Career
  • Terms of use