Download Center

DTMF analysis on CMW500 and CMW290

R&S CMW Wideband Radio Communication Tester - Platform overview - Product Brochure

Slide leftSlide right

R&S®CMW Wideband Radio Communication Tester - Platform overview - Product Brochure

R&S®CMW Wideband Radio Communication Tester - Platform overview - Product Brochure FR

CMW290 Functional Radio Communication Tester

IEEE 802.11 Wireless LAN Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure

Versatile Software Tool for Rohde & Schwarz Instruments RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure

Slide leftSlide right

Application Brochure - Bluetooth® Testing with the R&S®CMW

Application Brochure - Bluetooth® Testing with the R&S®CMW JA

Application Brochure - Bluetooth® Testing with the R&S®CMW KO

Application Brochure - Bluetooth® Testing with the R&S®CMW ZH-CN

How can the CQI (Chanel Quality Identifier) from UE and coresponding 3GPP specified mapping to Modulation and TBS be tested?

How to configure a external trigger at CMW500, CMW290, CMW270 to synchronize with LTE signal time frames

CMW500 / CMW290: GPRS / EDGE packet data measurements failed because UE stay not in TBF (Temporary Block Flow) state.

This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.

14-Dec-2016 | AN-No. 1C108

Duration: 1 day Training location: Munich Language: German eCall, ERA-GLONASS, CMW500, CMW290,CMWrun, CMW-KA09x

This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.

14-Dec-2016 | AN-No. 1C105

1MA281 IoT Power Consumption Measurement

17-Feb-2017 | AN-No. 1MA281

Application Note

19-Jun-2017 | AN-No. 1MA282

For establishing a WLAN connection between R&S CMW and device under test (DUT), the WLAN properties at the R&S CMW have to be adapted to the test conditions. These can vary in several aspects, particularly due to the different WLAN standards and characteristics of the DUT. This document describes the critical parameters and provides step-by-step procedures for the configuration.

08-Dec-2015 | AN-No. 1C106

Bluetooth Low Energy (BLE) 5.1 has introduced Angle of Arrival (AoA) and Angle of Departure (AoD) to enrich the direction finding (DF) feature. This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.

30-Oct-2019 | AN-No. GFM327

Rohde & Schwarz offers the R&S®CMW500 radio communication tester and the R&S®CMW290 functional radio communication tester to meet different testing needs; R&S®CMWcards for C-IoT

15-Oct-2018

This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.

08-Feb-2016 | AN-No. 1C107

The GSMA specified a global standard for remote provisioning and management of the embedded Universal Integrated Circuit Card (eUICC) in the machine-to-machine (M2M) environment via Over the Air (OTA) methodology.This application note describes the eUICC compliance and remote eUICC provisioning test solution based on R&S® CMW500/CMW290 and COMPRION® eUICC Profile Manager software tool.

03-Jun-2020 | AN-No. GFM342

R&S CMWrun Sequencer Software Tool

The R&S®CMW wireless communication tester offers an elaborate parametric test concept, including RF test cases, that makes this flexible test platform ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.

27-Jan-2017

Testing eSIM compliance and remote SIM provisioning

22-Aug-2019

Duration: 2 days Training location: Munich Language: English GSM, UMTS, WCDMA, LTE, 2G, 3G, 4G, CMW500, CMW290, CMWrun

UMTS (WCDMA) and LTE Functional test by selected transmitter and receiver tests Engineers and technicians working in development, production and quality assurance with basic knowledge about GSM, UMTS and LTE air interface who want to perform functional tests and RF measurements with R&S ® CMW500 Duration: 1 day Training location: Munich Language: English GSM, UMTS, WCDMA, LTE, 2G, 3G, 4G, CMW500, CMW290

CMW500/290/270: No more WLAN signaling function after WLAN firmware update

LTE UE capabilities Interpretation of Bandwidth Combination Set values shown in CMW Callbox

It is required to run two simultaneous NB IoT Signaling tests in parallel. Is this possible for a CMW call box tester?

CMsquares download file not available in R&S Installation Manager

Is it possible to set up an IP peer to peer test using CMW500 between a corporate network and one EUT attached to an LTE cell?

During the call setup with VoLTE/VoWiFi with EVS voice codec the bandwidth is negotiated. How can the bandwidth be setup and how will it be shown in the CMW user interface?