Pesquisa de Artigos e Documentos

English - 28 de jun. de 2018

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 14 de abr. de 2026

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 de dez. de 2017

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

English - 26 de mai. de 2020

This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB 3.2 Legacy Cable Testing for USB Type A, Type B, and Micro family connector types. Based on 5 Gbps and 10 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.

English - 9 de nov. de 2023

With continuously increasing data rates, signal integrity in high speed digital designs becomes more and more demanding

English - 8 de jul. de 2022

Describes the functionality of the external RFFE/GPIO interface R&S®ZN-Z15.

English - 6 de fev. de 2017

Describes the health and utilization monitoring service (HUMS).

English - 5 de set. de 2025

This application note reviews a new calibration subsystem which consists of Inline Calibration Units (ICUs). These ICUs are designed for in situ use, so they are left in place both during the calibration procedure and during the measurement of the Device Under Test (DUT).This adds versatility, convenience and accuracy to the VNA based measurement system, as it means the calibration can be refreshed at any time without manually disconnecting the DUT from the test system.

English - 29 de set. de 2017

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 8k cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

English - 19 de mai. de 2025

For measurements of non-connectorized devices, test fixtures, probes or other structures are used to adapt from the coaxial interface of the test setup to the device under test (DUT). For accurate measurements of the DUT, these lead-ins and lead-outs need to be characterized, so that their effects can be mathematically removed, i.e. de-embedded from the measurement results.This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND. As de-embedding is also essential in other test equipment like oscilloscopes, etc., this guide also describes, how lead-ins and lead-outs can be accurately characterized with a VNA and then exported as an S-Parameter file to be used by other test instruments.

English - 19 de set. de 2022

This application note provides hints for implementing remote control programs using Rohde & Schwarz spectrum and network analyzers. The document makes suggestions for improved remote control performance and describes aspects of measurement synchronization in detail. Finally the document discusses some typical challenges of remote control in production test.

English - 19 de ago. de 2014

PAM-4 (4-level pulse amplitude modulation) has been introduced in high-speed serial data technology to reduce the bandwidth demands of ultra-high data rates. It uses only half the bandwidth per bit that would be required of conventional NRZ (non-return to zero) modulation. But at the same time, PAM-4 signaling complicates design and test at every turn. Evaluation of channels is now just as important to system development as serializer / deserializer (SerDes) testing and the challenges presented require a higher level of test and measurement performance than ever before. This paper investigates the evaluation complexities of PAM-4 interconnects at high data rates.

English - 22 de out. de 2020

With continuously increasing data rates, signal inte grity aspects of high-speed digital designs and the components used become more and more challenging. Particularly at higher data rates, vector network analyzers (VNA) are increasingly replacing traditional time domain reflectometry (TDR) setups for testing passive components such as connectors, cables and PCBs. Users benefit from the higher accuracy, speed and ESD robustness of the VNA, making the VNA the instrument of choice in this field.

English - 20 de set. de 2016

Many applications in aerospace and defense as well as in mobile communication require a defined magnitude and phase relation between several signals, for example, to design a smart antenna array and it's distribution network, or to ensure accurate phase alignment between different transmitter or receiver chains of T/R modules. Magnitude can be measured with spectrum analyzers or power meters. For phase measurements, a vector network analyzer is the easiest, fastest and most accurate instrument.This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and R&S®ZNBT families.

English - 11 de jul. de 2019

This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes and direct attach copper cables (DAC) according to InfiniBand EDR and HDR specifications, based on 25 Gb/s and 50 Gb/s signaling per lane with vector network analyzers from Rohde & Schwarz.

English - 7 de abr. de 2021

Over the past few years, electronics developers have developed a variety of approaches to avoid interference on high-speed signals on printed circuit boards. However, with increasing complexity and frequency, PCBs set new limits, supporting frequencies of 40 GHz and higher. Driven by the fast growing 5G market, today’s digital systems operate in these high frequency ranges that come with completely new challenges. With slope steepness’s of just a few picoseconds, any discontinuity in the impedance and impairment of the inductance or capacitance on the PCB or back drill defects on the PCB can have a massive impact on the signal quality. The industry recognizes that there is a growing need for functional high-speed testing of PCBs. The MicroCraft® E2V6151 series combined with an R&S®ZNB vector signal analyzer delivers a fully automated solution.

English - 25 de mar. de 2020

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 80 cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

English - 19 de mai. de 2025

English - 23 de jul. de 2025

English - 15 de abr. de 2026

English - 31 de jul. de 2024

This Application Note provides guidance on using the “Intermodulation Wizard” through an example measurement.

English - 27 de mar. de 2013

This application note shows how to remote control the switching of RF and digital I/O signals by R&S®OSP Open Switch and Control Platform directly from a Vector Network Analyzer (VNA) or from a Spectrum Analyzer (SA). The R&S®ZVA, R&S®ZVB, R&S®ZNB, R&S®FSW and R&S®FSV families are covered. The application note first describes the requirements and setup procedure. It is shown how to install the software and how to set up the system in order to get highest flexibility and best usability. It is then shown how to calibrate the entire configuration and finally some practical examples are provided. Switching is explained using VNAs as an example, the appendix 5.4 provides hints regarding the differences when using SAs in a similar way.

English - 6 de dez. de 2013

The R&S®ZNB vector network analyzer simplifies instrument configuration and calibration using the mixer measurement wizard and SMARTerCal.

English - 1 de out. de 2013

Filter tuning has never been easier and faster. SynMatrix advanced computer-aided tuning enables real time filter optimization in an easy guided process using the R&S®ZNB, R&S®ZND and R&S®ZNL vector network analyzer from Rohde & Schwarz. The SynMatrix solution provides a feature-rich GUI for R&D and lab use, as well as a simplified version for production applications.

English - 2 de mai. de 2024