TDR/TDT analysis Oscilloscope software

General analysis

TDR/TDT analysis Oscilloscope software
Abrir o Lightbox
TDR/TDT analysis Oscilloscope software
Abrir o Lightbox
TDR/TDT analysis Oscilloscope software
Abrir o Lightbox
TDR/TDT analysis Oscilloscope software
Abrir o Lightbox
TDR/TDT analysis oscilloscope software, software TDR/TDT analysis oscilloscope software, screenshot TDR/TDT analysis oscilloscope software, screenshot TDR/TDT analysis with R&S oscilloscopes

Key Facts

  • Supports single-ended and differential TDR/TDT analysis
  • Uses the internal R&S®RTO/RTP-B7 16 GHz differential pulse source
  • A wizard guides through calibration and measurement
  • Multi-domain icon

Oscilloscope software

The R&S®RTO/RTP-K130 option combines the R&S®RTO/RTP-B7 pulse source and the analog input channels of the R&S®RTO or RTP oscilloscope to create a time domain reflection (TDR) and transmission (TDT) analysis system that helps characterize and debug signal paths, including PCB traces, cables and connectors. The option allows both single-ended and differential measurements (only with RTP).

Features & benefits

Single-ended and differential TDR/TDT

The R&S®RTO/RTP-B7 pulse source provides a highly symmetrical differential pulse signal with a steep rise time of 22 ps. This enables either single-ended or differential time domain reflection (TDR) and/or transmission (TDT)  analysis with the R&S®RTP. The R&S®RTO only supports single-ended TDR/TDT measurements. 

Single-ended TDR
Abrir o Lightbox

Single-ended TDR

Setup dialog for the configuration of a single-ended time domain reflectometry (TDR) measurement. Display of impedance and reflection coefficient over distance.

Wizard support for calibration and measurement

Guided operation

The TDR/TDT wizard guides users through the test setup calibration based on the selected measurement type (TDR, TDR/TDT, TDT) and configuration (single-ended or differential). The wizard then uses illustrations to help with the test setup and parameter definition for the measurement.

Wizard for calibration TDR/TDT setups
Abrir o Lightbox

Wizard for calibration TDR/TDT setups

A wizard guides users through the TDR/TDT setup calibration.

Complete solution

Fully integrated

The R&S®RTP-K130 TDT/TDR analysis option and R&S®RTO/RTP-B7 pulse option are fully integrated in the oscilloscope graphical user interface. The pulse option includes all the calibration and measurement accessories, such as shorts, 50 Ohm terminations or cables. The R&S®RT-Z17 low-loss and phase-matched cable pair is required for differential measurements.

Abrir o Lightbox

Available models

Available models
Modelos
Max. analysis bandwidth
Max. bandwidth diff. TDR+TDT
Pulse source
Supported oscilloscope models
Base unit

R&S®RTP-K130

Order Number 1326.3093.02

Max. analysis bandwidth
16 GHz
Max. bandwidth diff. TDR+TDT
8 GHz
Pulse source
R&S®RTP-B7
Supported oscilloscope models
RTP044, RTP064, RTP084, RTP134, RTP164
Base unit

R&S®RTO-K130

Order Number 1326.3087.02

Max. analysis bandwidth
6 GHz
Max. bandwidth diff. TDR+TDT
4 GHz
Pulse source
R&S®RTO-B7
Supported oscilloscope models
RTO2024, RTO2034, RTO2044, RTO2062
Base unit

R&S®RTO6-K130

Order Number 1801.6893.02

Max. analysis bandwidth
6 GHz
Max. bandwidth diff. TDR+TDT
4 GHz
Pulse source
  R&S®RTO6-B7
Supported oscilloscope models
R&S®RTO64 with R&S®RTO6-B92/93/94/96
Base unit

Available options

Hardware options
Product
Descrição
R&S®RTP-B7

Order Number 1333.2001.02

Descrição

Differential 16 GHz pulse source for R&S®RTP High-Performance Oscilloscope

R&S®RTO-B7

Order Number 1333.2030.02

Descrição

Differential 16 GHz pulse source for R&S®RTO2000 Oscilloscope

General accessories
Product
Descrição
R&S®RT-ZA16

Order Number 1320.7074.02

Descrição

Precision BNC to SMA adapter

R&S®RT-ZA17

Order Number 1337.8991.02

Descrição

Matched pair SMA cable for TDR measurement

Microwave probes
Product
Descrição
R&S®DPSS201503

Order Number 1801.4649.02

Descrição

Differential microwave probe, 20 GHz, 0.3 mm pitch

R&S®DPSS201504

Order Number 1801.4655.02

Descrição

Differential microwave probe, 20 GHz, 0.4 mm pitch

R&S®DPSS201505

Order Number 1801.4661.02

Descrição

Differential microwave probe, 20 GHz, 0.5 mm pitch

R&S®DPSS201508

Order Number 1801.4678.02

Descrição

Differential microwave probe, 20 GHz, 0.8 mm pitch

R&S®DPSS201510

Order Number 1801.4684.02

Descrição

Differential microwave probe, 20 GHz, 1.0 mm pitch

R&S®SPGR201502

Order Number 1801.4703.02

Descrição

Single-ended microwave probe, 20 GHz, 0.25 mm pitch

R&S®DPSS201512

Order Number 1801.4690.02

Descrição

Differential microwave probe, 20 GHz, 1.2 mm pitch

R&S®SPGR201504

Order Number 1801.4710.02

Descrição

Single-ended microwave probe, 20 GHz, 0.4 mm pitch

R&S®SPGR201505

Order Number 1801.4726.02

Descrição

Single-ended microwave probe, 20 GHz, 0.5 mm pitch

R&S®SPGR181508

Order Number 1801.4732.02

Descrição

Single-ended microwave probe, 18 GHz, 0.8 mm pitch

R&S®SPGR181510

Order Number 1801.4749.02

Descrição

Single-ended microwave probe, 18 GHz, 1.0 mm pitch

R&S®SPGR161512

Order Number 1801.4755.02

Descrição

Single-ended microwave probe, 16 GHz, 1.2 mm pitch

R&S®SPGR161514

Order Number 1801.4761.02

Descrição

Single-ended microwave probe, 16 GHz, 1.4 mm pitch

R&S®SPGR161516

Order Number 1801.4778.02

Descrição

Single-ended microwave probe, 16 GHz, 1.6 mm pitch

R&S®DP-HAND01

Order Number 1801.4826.02

Descrição

D-Probe Handle for hand probing

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.