05-Jun-2023 | Press Release | RF & microwave components

Designing a 5G FR2 phased array antenna module (PAAM) requires over-the-air (OTA) testing to measure parameters like equivalent isotropic radiated power (EIRP) and effective isotropic sensitivity (EIS) in addition to traditional radiation patterns. Rohde & Schwarz has joined Fujikura and Avnet to validate their new development kit for 5G mmWave phased array antenna modules. The R&S ATS800B benchtop CATR OTA test system from Rohde & Schwarz is ideal for prototype testing in an open environment

23-May-2023 | Press Release | Wireless communications

The R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.

06-Jun-2023 | Press Release | Automotive

At Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.

07-Jun-2023 | Press Release | Test & measurement

For precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specifications, Rohde & Schwarz is developing a new R&S ZNrun vector network analyzer automation suite option. For a fully automated verification of a PCIe x8 cable, for instance, the software controls a setup with R&S ZNB vector network analyzer plus scalable R&S OSP switch matrix configuration, creating a multiport VNA solution with 64 test ports. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs with all Thru and all crosstalk combinations plus corresponding metric calculations for Pass/Fail evaluations. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.

30-May-2023 | Press Release | Wireless communications

The Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.

01-Jun-2023 | Press Release | Test & measurement

Rohde & Schwarz has successfully validated 5G RedCap (reduced capability) test cases for its R&S CMX500 one-box signaling tester and R&S TS8980 conformance test system for the recent Conformance Agreement Group (CAG) #74 meeting, allowing the Global Certification Forum (GCF) to activate the respective work items in their device certification program. Manufacturers of IoT chipsets, modems and end devices as well as test houses can now rely on tried-and-tested Rohde & Schwarz solutions for 387 5G RedCap test cases in all device production stages, from early R&D to type approval conformance testing.

06-Mar.-2017 | Press Release

22-Aug.-2017 | Press Release

30-May-2017 | Press Release

21-Mar.-2017 | Press Release

17-Jul.-2017 | Press Release

31-Jul.-2017 | Press Release

03-Mar.-2017 | Press Release

12-Sep.-2017 | Press Release

28-Aug.-2017 | Press Release

18-Apr.-2017 | Press Release

29-Aug.-2017 | Press Release

07-Sep.-2017 | Press Release | Event

30-Sep-2021 | Press Release | Automotive

Rohde & Schwarz and Vector Informatik are collaborating on closed-loop scenario testing of automotive radar sensors for advanced driver assistance systems (ADAS) and autonomous driving (AD). Coupling the DYNA4 virtual test drive simulation platform from Vector with the latest Rohde & Schwarz radar moving object stimulation system enables powerful verification of safety-critical ADAS functions. These include emergency braking in an integrated hardware-in-the-loop (HiL) environment.

02-Apr-2020 | Press Release | Automotive

Löhnert Elektronik is integrating the R&S QAR imaging tester from Rohde & Schwarz into its new end-of-line test benches for automotive radomes. Now the test benches can reproducibly test the reflection and transmission of these sensor covers over their entire surface at cycle rates of less than ten seconds.

21-Jan-2019 | Press Release | Broadcast and Media

GMIT GmbH, a subsidiary of the Rohde & Schwarz group since 2010, will be fully integrated into Rohde & Schwarz GmbH & Co. KG by the end of January 2019 and retroactively to July 1, 2018. With this move, the electronics specialist reinforces its commitment to digital products. The focal points are the R&S PRISMON audio/video content monitoring and multiviewer solution and the R&S RelayCaster IP contribution solution.

28-Mar-2022 | Press Release | Test & measurement

Europe's premier microwave, RF, wireless and radar event – European Microwave Week – returns as live event to London in April 2022. Test and measurement expert Rohde & Schwarz has been introducing a number of innovative solutions for measurements up to mmWave frequencies over the past months, which visitors will be able to experience in person at the conference exhibition.

29-Apr-2015 | Press Release | Company

Despite the stranglehold of the top participants, Rohde & Schwarz leveraged its R&D expertise to successfully penetrate the oscilloscope market

01-Jun-2020 | Press Release | Broadcast and Media

The measurement and analysis tool provided an objective look at the performance of cloud-based alternatives to the existing PBS workflow.

04-May-2017 | Press Release | Event

For the first time, Rohde & Schwarz will exhibit its extensive oscilloscope portfolio at PCIM 2017 in Nuremberg. Visitors to hall 6, booth 224 will be treated to numerous highlights, from the portable R&S Scope Rider and the new entry-level R&S RTB2000 oscilloscope to the R&S RTO2000 high-performance oscilloscope with 6 GHz bandwidth. Other innovations include new accessories specifically targeted at power integrity measurements.

26-Feb-2018 | Press Release | Test & measurement

At Mobile World Congress 2018, Rohde & Schwarz will showcase its innovative solutions in keeping with its theme "Optimizing the present. Designing the future." For chip manufacturers, the first one-box 5G NR test solutions will be on display. Rohde & Schwarz will also present the world’s first test solution for a chipset that utilizes enhanced Carrier Aggregation (eCA) for LTE mobile broadband transmissions. The chipset receives and processes eight downlink carrier signals in parallel, allowing transmission rates of up to 2 Gbit/s in current LTE networks.

15-Mar-2017 | Press Release | Test & measurement

Automotive Ethernet has established itself as a standard communications structure. All major manufacturers now depend on this cost-efficient solution for fast data transmission in motor vehicles. With the new IEEE 1000Base-T1 standard, the success story continues. Rohde & Schwarz is the first T&M equipment manufacturer to offer a compliance test solution for 1000Base-T1.

21-Feb-2022 | Press Release | Test & measurement

At MWC Barcelona 2022 Rohde & Schwarz is showcasing its range of automotive 5G and C-V2X test solutions for development in the lab and verification in the field to ensure the performance and reliability of critical automotive communications. Further focus applications are UWB test solutions for R&D, certification and production as well as flexible GNSS simulation provided by Rohde & Schwarz.

17-Mar-2023 | Press Release | Test & measurement

Rohde & Schwarz will present its new R&S TSEMF-B2E isotropic antenna for the TS-EMF measurement system at the EMV trade show in Stuttgart. This new antenna covers the frequency range from 700 MHz to 8 GHz and allows simple and precise evaluation of emissions on site – even for new radio services. When combined with Rohde & Schwarz spectrum analyzers, the R&S TS-EMF measurement system detects high‑frequency electromagnetic fields (EMF) in the environment.

02-May-2019 | Press Release | Aerospace & defense testing

For the first time in the US, Rohde & Schwarz presents its R&S PKU100 Ku-band satellite uplink amplifier in an outdoor version at Satellite 2019 show. It combines the best of two worlds in a single device: the unbeatable strengths of solid-state amplifiers and the compactness and low weight of tube amplifiers. The extremely robust and weatherproof model is perfectly suited for outdoor applications and features all the advantages of the indoor model. The R&S PKU100 can be used in ground stations and satellite news gathering (SNG) vehicles. The amplifier is to be found from May 6 to May 9 at booth 1943 during Satellite Show.