The optional internal fading simulator provides up to 40 fading paths for simulating multipath propagation.The R&S®SMU200A can be fitted with a wide range of options – for example, options for all of today's important digital standards as well as function and performance enhancements such as MIMO fading or phase coherence.

Polar modulation is a method where digital modulation is realized as a combination of phase and amplitude modulation, rather than using an I/Q modulator. This technique becomes increasingly important in mobile communication. This application note shows how to generate polar modulation with an R&S®SMU200A Vector Signal Generator.

26-Nov-2004 | AN-No. 1GP58

For further information please refer to "www.rohde-schwarz.com/royalty-free-products".35 MBV 4.0 13.12.2018 R&S®SMx RF and Baseband Correction Toolkit Software for equalizing I/Q imbalance and RF frequency response of generator setups consiting of a R&S®AFQ100A / R&S®AFQ100B and a R&S®SMU200A / R&S®SMJ100A / R&S®SMATE100A / R&S®SMBV100A / R&S®SGS100A.

msdownload/update/software/secu/2019/05/windows6.1-kb4499175-x64_3704acfff45ddf163d8049683d5a3b75e49b58cb.msu 2 Check Applicable Instruments 2.1 Instruments, where the patch has been tested and released The following table shows an overview of applicable instruments: Device Windows XP (Embedded) SP3 Windows Embedded 7 32-bit Windows Embedded 7 64-bit SFE, SFC X BTC X UPV, UPP X X AFQ100A, AFQ100B X SMU200A

Rohde & Schwarz offers different analog and digital signal generators: from RF vector signal generators, baseband signal generators, microwave signal generators.

English (PD 0758.0197.22)

LabWindows/CVI, VXIpnp driver history for the R&S® Vector Signal Generators Products: | R&SSMW200A | R&SSMBV100A | R&SSMM100A | R&SSMU200A | R&SSMBV100B Driver history for LabWindows/CVI and VXIplug&play Instrument Driver for C/C++, VEE, etc.

Describes all instrument functions and remote control commands of the base unit, including measurement and programming examples. Also describes some general functions that apply to several applications.Includes the contents of the Quick Start Guide manual.The online version contains the documentation for the R&S®SMU200A base unit and all options for immediate display (no download required).

English (PD 0758.0197.12)

Provides the information required to prepare the instrument for use and start working.Basic operations and handling are described.

Provides information on security issues when working with R&S®SMU200A in secure areas.

This application note describes how to convert GPS routes from NMEA 0183 file format to waypoint files that can be used by the R&S®SMU200A Vector Signal Generator.

26-Sep-2008 | AN-No. 1MA133

This application note describes how to set up 3GPP FDD and LTE multicell and multi-UE scenarios with the R&S®SMU200A with a focus on routing and leveling of the baseband signals. Furthermore, it describes in detail how to determine the correct AWGN settings, i.e. how to calculate the required signal-to-noise ratio for the various scenarios.

10-Aug-2011 | AN-No. 1GP80

This application note describes how to verify and validate a LTE (FDD) RF chipset using R&S® SMU200A vector signal generator, R&S® FSQ signal analyzer and R&S® EX-IQ Box. The related signal generation as well as signal analysis is described

19-Dec-2008 | AN-No. 1MA138

This Application Note describes measurements compliant with the CDMA2000® base station standard described in 3GPP2 C.S0010-C v2.0 / TIA/EIA-97-F-1. The primary focus is on solutions for generating and analyzing CDMA2000® signals. The special characteristics that make the selected signal generators and signal analyzers highly suitable for this purpose are detailed, and remote control programming is demonstrated by means of a free-of-charge program.

15-Sep-2009 | AN-No. 1MA109

This application note describes how to use the Rohde & Schwarz software tool ‘RsBatchConvert.exe’ for the conversion of binary data or WinIQSIM generated AMIQ waveforms into the new waveform format. The tool not only rescales I/Q data contained in the file but also changes the K-option requirement from WinIQSIM Kxx to the new WinIQSIM2 K2xx options. Thus, new instruments with installed K2xx options may be used to continue using existing waveform files.

18-Jun-2009 | AN-No. 1GP64

How to Connect the Control Cable from the FSP-B10 (ext. Generator Control) to the SMU200A?

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

15-Sep-2012 | AN-No. 1MA206

This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent® ADS® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow. Versions for both WINDOWS XP® and LINUX® operating systems are available.

04-Aug-2012 | AN-No. 1MA72

Describes the specific functions of the application. Information required to install and prepare the software for use and start working, as well as the remote connection to Rohde&Schwarz instruments are described.The application is supported by the following products:R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A, R&S®AMU200A and the I/Q modulation generators R&S®AFQ100A and R&S®AFQ100B.For information on operating the product see the corresponding user manual.

Describes the specific functions of the software.The application is supported by the following products:R&S®SMU200A and R&S®SMATE200A.For information on operating the product see the corresponding user manual.

Describe how to configure a signal generator from Rohde&Schwarz to generate test signals for basic tests on Dual Cell HSDPA (DC-HSDPA) operation.The uplink application is supported by the following products, R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A R&S®AMU200A, and R&S®WinIQSIM2TM. The downlink application sheet refers to .R&S®SMU200A.

Describes the specific functions of the software, including the remote control commands with programming examples.The application is supported by the following products:R&S®SMW200A, R&S®SMBV100A, R&S®SGT100A, R&S®SMU200A, and R&S®SMJ100A.For information on operating the product see the corresponding user manual.

Interruptions in the RF level when the signal changes

Multiple Input Multiple Output (MIMO) is an integral part of LTE. Vector signal generators and signal & spectrum analyzers from Rohde & Schwarz support LTE measurements with up to 4 antennas. This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.

09-Oct-2014 | AN-No. 1MA143

User manuals collection of all options supported by the signal generation software R&S®WinIQSIM2TM.Each manual describes the specific functions of the applications, including the remote control commands with programming examples.The R&S®WinIQSIM2TM User Manual (online version) contains the documentation of the software and all options for immediate display (no download required).Tip: Click on the title of this page for an overview on the related user manuals of the digital standards that apply to the signal generation software.

Replace extensive field tests on fast frequency hopping radios by simulating real-world radio link conditions in the lab

09-Aug-2013

This application note describes how to measure the coherence (phase-, timing and gain-differences) between two RFSignals using Rohde&Schwarz spectrum analyzers, a Rohde&Schwarz signal generator and the R&S FS-Z10 Coherence Unit.

28-Sep-2010 | AN-No. 1EF70

Femtocells or Home base stations are an important development for cellular networks. This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology. Tests, test plans and hardware setups for Femtocells with and without receiver diversity are detailed. Find hints about the instrument settings and have a look at typical measurement results. An introduction to simulating GPS / A-GPS signals for testing the GPS receiver of a Femtocell completes the paper.

02-Feb-2012 | AN-No. 1MA139

LTE-Advanced comprises multiple features enhancing the basic LTE technology firstly specified in 3GPP Release 8. LTE including the LTEAdvanced improvements was approved by ITU to comply with IMT-Advanced requirements and thus being a true 4G mobile communication system. The different technology components of LTE-Advanced have different market priorities and require different testing strategies. This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.

03-Sep-2014 | AN-No. 1MA166