5G NR network measurements

5G NR network measurements

5G NR network measurements

5G NR is the new radio access technology for the next generation mobile communication standard that is significantly different from LTE in the following characteristics:

  • New frequency bands below and above 6 GHz, promising globally available frequency ranges with the principle ones being: 3.4 to 4 GHz and 26 to 29 GHz.
  • Beamforming support for synchronization signals and broadcast channels
  • Wide flexibility of physical radio parameters such as channel bandwidth, subcarrier spacing and symbol duration

These characteristics have an impact on the signal propagation and consequently increase the need for accurate coverage measurements to enable and verify correct 5G NR network planning and the rollout of base stations.

How to test a mobile network

The Network Coverage Challenge

As for all new technologies, coverage is the most important question that has to be answered with confidence

This 5G NR coverage challenge impacts all phases of the lifecycle of 5G NR networks:

  • Before network rollout (pre-installation phase): 5G NR network measurements in a pre-commercial network trial are the only way to provide insights into the performance of the new technology and to overcome uncertainties before commercial launch.
  • At commercial network rollout (installation phase): 5G NR network measurements verify 5G NR network planning and site installation, for example to determine if the planned cluster and network coverage will be successful.
  • In network optimization phase: 5G NR network measurements can verify the handover areas between sites, cells and beams and at the same time limit the interference between cells to increase the provided capacity.
  • Trouble shooting: 5G NR network measurements help find root causes of potential problems in networks, e.g. coverage holes, high interference causing too low capacity, etc.
  • Benchmarking: 5G NR network measurements will also support benchmarking campaigns in the future in order to compare different operators’ 5G NR networks.
wireless-communications-5G-5G-eBook-rohde-schwarz.jpg

Is 5G a revolution?

Register now for our new 5G New Radio digital book to get a comprehensive answer to this question. Gain insights into the fundamentals, procedures and testing aspects of 5G NR.

AVAILABLE NOW

Further information

App Brochure: Site testing and trouble-shooting in 5G mobile networks

One of the critical stages in 5G roll out is site testing of the gNodeB to verify the radio environment and conduct the end-to-end tests that are the ultimate check that services are delivered to end users. The new RAN architecture and more critical services demand a new approach for 5G compared with traditional techniques, including OTA connectivity and defining a new set of performance KPIs. This application brochure enables you to identify the various deployment scenarios and use an efficient test methodology using scanners, analyzers and smartphones, to overcome the challenges of verifying correct 5G site installation.

Download now

White paper: 5G NR networks are here – let’s test!

Do you want to find out how to test a 5G NR network? This white paper guides you through the challenges and describes 5G NR technology basics like beamforming for synchronization signals and broadcast channel information.

More information

App Card: 5G NR – interference hunting in the uplink of TDD networks

The deployment of 5G NR brings new performance and applications but it also is the first global adoption of TDD networks where the downlink and the uplink use the same frequency; meaning that downlink signals can mask interference.Download this Application Card to discover how to identify and locate 5G NR interference that can significantly decrease performance and reliability.

More information

App Note: 5G NR network measurements with network scanners including data analytics

This application note describes the highlights of 5G NR network analysis in pre-commercial trials and early deployments and introduces the functionality of the R&S®TSMx6 mobile network scanner family together with R&S®ROMES4 and R&S®SmartAnalytics software.

Register now

App Card: Fast 5G waveform verification in the field

5G, the next generation wireless standard, promises to deliver an enhanced end-user experience by offering new applications and services through extremely high speeds and significantly improved latency. To verify fundamental 5G NR downlink parameters such as occupied bandwidth and SSB channel bandwidth, a handheld spectrum analyzer can be used and this application card describes the process for doing so.

More information

App Card: Automated spectrum clearance in LTE and 5G mobile networks

Interference that can degrade capacity and quality of service is becoming ever more troublesome as operators roll out 5G NR using new bands that previously contained other services. This is particularly important for the rollout of 5G NR because of its demanding use cases and high spectral density. This Application Card describes the challenges of spectral clearance and details the process of automatic detection of interference signals using a network scanner and drive test software.

More information

Be ahead in 5G. Demystifying 5G NR poster

Be ahead in 5G with test and measurement solutions from Rohde & Schwarz. Use our form below to register and receive your free "Demystifying 5G NR Poster" by post.

More information

5G wireless communications

In addition to 5G NR network testing, Rohde & Schwarz offers 5G NR test solutions for the R&D and production phases of chipsets, devices and network infrastructures. For more information, visit the main Rohde & Schwarz 5G web page.

More information

5G broadcast

5G Broadcast is an exciting application of 5G technology that offers operators huge capacity and coverage advantages; translating into better QoE for mobile subscribers and providing consumers with near-instantaneous delivery of content wherever they are. For more information, visit the Rohde & Schwarz Broadcast and Media 5G broadcast web page.

More information

5G NR network measurement solutions from Rohde & Schwarz

Beam-specific 5G NR coverage measurements

This 5G NR test solution is based on the field-proven R&S®ROMES drive test software for measuring network quality with scanners and test smartphones and covers all cellular technologies.

  • In combination with the scanners R&S®TSME6 and R&S®TSMA6, R&S®ROMES offers the first 5G NR network measurement solution that measures true 5G NR network coverage.
  • The solution also verifies the impact of beamforming for synch signals and broadcast channels.
  • R&S®ROMES drive test software is designed to connect 5G NR USB dongles or other pre-commercial devices to monitor the 5G NR device / network interaction and execute UL tests. It is a universal network optimization tool for collecting and analyzing 5G NR data.

This Rohde & Schwarz 5G NR network measurement solutions has been shortlisted for the Global Telecoms Award 2018 in the 5G category called “Advancing the road to 5G”.

For more detailed information, see our press release on the world’s first 5G NR network measurement solution.

5G over-the-air measurements with the R&S®Spectrum Rider FPH handheld microwave spectrum analyzer

The R&S®Spectrum Rider FPH handheld spectrum analyzer’s frequency coverage up to 31 GHz combined with features such as 6 hour battery life, low weight (2.5 kg), backlit keypad, fast boot time, non-reflective display and ruggedized housing make it optimized for field spectral measurements of 5G signals. The R&S®FPH combined with an appropriate antenna can make over-the-air 5G measurements including occupied bandwidth, spectral emission mask and channel power, thus making it capable of verifying 5G transmissions. With frequency coverage to 31 GHz, the R&S®FPH’s can also be used for spectrum clearance and interference hunting in new 5G bands.

Blog posts

5G NR network rollout is now – let’s test!

The 5G NR standard (3GPP Release 15) contains a high degree of flexibility in radio parameters which complicates network measurements. However, Rohde & Schwarz has already conducted measurements in pre-commercial 5G NR trial networks with our commercially available 5G NR network measurement solution. We gained interesting insights into the new technology’s performance, capabilities and frequency bands.

This is part four of our 5G blog post series.

More information

5G: First independent 5G test network benchmark study

Signals Research Group relies on the prototype measurement system designed by Rohde & Schwarz to meet the aggressive timeline of early 5G adopters. In a Verizon Wireless 28 GHz trial network R&S®TSMA autonomous drive test scanners were used to collect downlink performance metrics for the beam reference signals (BRS), including RSRP, CINR, RSRQ, PCI, etc.

This is part three of our 5G blog post series.

More information

5G: Initial 5GTF coverage measurements

The US operator Verizon Wireless targets fixed wireless access (FWA) in the 28 GHz frequency band. Together with partners, they created a pre-5G specification called 5G Technical Forum (5GTF). For the required signal quality and 5G coverage measurements, Verizon Wireless relied on our prototype measurement backpack solution.

This is part two of our 5G blog post series.

More information

5G: The role of mobile network testing on the path to 5G

Long before commercial 5G services are even available, a myriad of articles, reports, presentations and speeches have been made public – creating a big buzz and high expectations surrounding the new standard. What’s the role of mobile network testing on the path to 5G? How can scanner measurements help operators pave the way to the next generation of mobile networks?

This is part one of our 5G blog post series.

More information

Videos

Webinar: Ensure successful 5G site testing and acceptance

This on-demand webinar uses a real case study from the first pervasive 5G network in Europe to examine the importance of site acceptance testing. Learn about essential KPIs, test techniques using state of the art tools and real 5G field measurement results.

More information

Interview: Quality of Experience in 5G?

Interview: Quality of Experience in 5G?

Rohde & Schwarz MNT already hold a reference position in the market for measuring QoE of mobile networks. The emergence of 5G brings new use cases and services. Hanspeter Bobst (Vice President R&S MNT) discusses in an interview with The Mobile Network on MWC2019 how QoE in 5G will be different and that test approaches have to be adapted.

More information

Webinar: Prepare your spectrum for 5G deployment

The roll out of 5G NR will initiate a worldwide deployment in an unknown radio environment where unwanted transmitters can degrade end user QoE and in some cases cause outages of critical services. Prior to deployment, operators need to ensure the radio environment is free from interference by conducting spectral clearance and interference hunting. This webinar defines the particular challenges of 5G NR, highlights a robust approach to prepare the spectrum and shares real field data at 3.5 GHz and 28 GHz.

More information

Webinar: 5G NR network deployment is now - let’s test!

This webinar considers how to ensure efficient and predictable 5G NR rollout, identifies the technical fundamentals and defines a test approach to deliver the required network performance. Real 5G NR network measurement results of coverage and operation of beamforming from a pre-commercial field trial are shared.

More information

Mobile network testing worlds first 5G NR network measurement solution

World’s first 5G NR network measurement solution

This video shows the recently launched 5G NR network measurement solution that consists of a network scanner and the ROMES software for real-time analysis and network optimization.

More details

Mobile network testing 5G NR measurements ssb beamforming video

How does SSB beamforming work in field?

This video discusses how beamforming for synchronization signals and broadcast channels works in 5G NR. It contains a replay of real field data collected in a pre-commercial 5G NR network trial.

More details

Videos – demystifying 5G

Demystifying 5G – MNT - How a 5G UE accesses the 5G network
Demystifying 5G – How a 5G UE accesses the 5G network

The video explains the 5G-LTE dual connectivity, how a 5G phone accesses the 5G network and shows the measurement software to follow the process.

Demystifying 5G - MNT - how fast is 5G in commercial networks?
Demystifying 5G – How fast is 5G in commercial networks?

The video shows data throughput measurements of a 5G router (connected to ROMES) and a 5G phone (with QualiPoc Android) in mmwave 5G networks with 4 times 100MHz bandwidth.

Demystifying 5G – Automatic channel detection (ACD) measurement for 5G NR
Demystifying 5G – Automatic channel detection (ACD) measurement for 5G NR

The video demonstrates how the automatic channel detection (ACD) option eases 5G coverage measurements even in the mmWave frequency range.

Rohde-Schwarz-Demystifying-5G-Video-50-frequency-setting-coverage-measurement
Demystifying 5G – Frequency settings in 5G NR

The video provides insights into the channel raster and synchronization raster in 5G NR in order to explain how to perform coverage measurements for 5G non-standalone and standalone mode.

Rohde-Schwarz-Demystifying-5G-Video-49-LTE-5G-28GHz-measurements
Demystifying 5G – Simultaneous coverage measurements on LTE and 5G NR at 28 GHz

The video demonstrates the simultaneous measurement of 5G NR signals in the mmWave frequency range at 28 GHz and LTE in sub 6 GHz using a single network scanner in a 5G backpack for coverage and beamforming tests.

Rohde-Schwarz-Demystifying-5G-Video-48-beamforming-mmWave
Demystifying 5G – Concept of SSB beamforming in mmWave frequencies

The video explains the concept of synchronization signal blocks (SSB), how SSB beamforming works in sub 6 GHz and mmWave frequencies and how many different beams can be realized by the network infrastructure.

Rohde-Schwarz-Demystifying 5G Video-47-measurements-backpack
Demystifying 5G – Backpack for simultaneous 5G NR and LTE coverage measurements

The video introduces a compact backpack that is ideal to perform simultaneous network measurements of 5G NR in mmWave and sub 6 GHz frequencies.

Rohde-Schwarz-5G-39MNT-NSA-network-identification_screenx1440.jpg
Demystifying 5G - How does 5G NR devices identify the network?

This video explains why a UE (supporting LTE and 5G NR) in 5G NR non-standalone mode always requires an LTE connection as anchor. Learn how a UE is identified to be “5G NR capable” via an LTE base station and is informed where to search for a 5G NR base station (gNB) signal.

More details

Demystifying 5G - 5G NR network measurements at 3.5 GHz
Demystifying 5G - 5G NR network measurements at 3.5 GHz

The video demonstrates how to perform 5G NR network measurements at 3.5 GHz. The captured RF measurements are visualized with the customizable R&S®ROMES4 drive test software that supports real-time network analysis, optimization and troubleshooting.

More details

Demystifying 5G – Configuring a 5G NR network measurement setup
Demystifying 5G – Configuring a 5G NR network measurement setup

This video explains how easy it is to configure the R&S®TSME6 network scanner. The simple mode has all standard-compliant settings prepared for identifying cell-defining SSBs while the R&S®ROMES expert mode allows to freely configure the 5G NR scanner.

More details

Demystifying 5G – How to flexibly measure multiple SSB transmissions
Demystifying 5G – How to flexibly measure multiple SSB transmissions

The 3GPP standard offers a huge flexibility in refer to the 5G NR air interface. Based on the 5G NR network measurement solution from Rohde & Schwarz, the video demonstrates how to measure all synchronization signal blocks (SSBs) in different frequencies with all SSB indices

More details

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

I want to receive information from Rohde & Schwarz via

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Thank you.

Your Rohde & Schwarz-Team

An error is occurred, please try it again later.