Ключевые факты
The ZES ZIMMER LMG600 Series of Precision Power Analyzers provides high-accuracy power measurements for demanding test applications. Its DualPath architecture enables simultaneous wideband and narrowband analysis up to 10 MHz. It measures precisely from very low power to complex multi-phase and high-power systems through configurable power channels and external sensors.
A 10.1" touchscreen with an intuitive user interface, built-in data logging, and customizable menus simplify operation and reduce setup time. Whether used in R&D, validation, or certification, it delivers consistent, traceable results for accurate power analysis.
Tailored precision where you need it
Not every measurement in a setup demands the same precision or bandwidth. The LMG600 Series supports four channel types (S, A, B, C) that can be mixed freely within the same chassis, ranging from the S-Channel with 0.015% AC accuracy and 10 MHz bandwidth down to the C-Channel for lower-frequency tasks. You configure the instrument to match the application — no over-specification, no compromises where it counts.
Channel flexibility
Wideband and narrowband values in a single measurement
Conventional power analyzers force a compromise: enable the anti-aliasing filter and lose wideband content, or disable it and risk aliasing errors in your FFT. The LMG600 Series resolves this with two independent A/D converters per channel — one for the filterless wideband signal, one for the narrowband signal after anti-aliasing. Both paths run in parallel, delivering RMS values, harmonics, and FFT results from the same signal simultaneously.
DualPath architecture
A user interface tailored to your application
Build application-specific views from the ground up: choose which electrical quantities and I/O variables to display, arrange them freely on screen, and add graphical elements such as wiring diagrams, photographs, or your brand identity. Pass/fail indicators and on-screen input fields for DUT-specific parameters can be embedded directly into the view, creating a measurement environment that even less experienced operators can use confidently.
Menu possibilities
Range extension of current measurements
Connected precision current transducers (PCT) identify themselves to the LMG600 via an integrated bus, automatically transferring scaling factors, delay compensation, sensor type, and last calibration date. The LMG600 Series power analyzers also power the sensors directly, eliminating separate supplies. There is no difference between direct and sensor-based measurements, and no manual fine-tuning required to obtain accurate results.
PCT sensor and interconnections
Bridging power analysis and the automotive world
The LMG600 Series is capable of sharing up to 128 measured values and variables directly over CAN bus including voltage, current, power, speed, torque, temperature and more. The interface works both ways: the LMG600 can also act on incoming CAN messages, with up to 128 trigger conditions available to start recordings, switch ranges, or initiate logging based on external events. No middleware, no manual data alignment.
CAN Menu LMG600
Standards-conforming evaluation, end to end
The LMG Test Suite drives the LMG600 through EMC compliance tests according to - IEC/EN 61000-3-2/-12 (harmonics) - IEC/EN 61000-3-3/-11 (flicker) - EN 50564 / IEC 62301 (standby power). It works with any standards-compliant AC source, online or offline, and exports comprehensive test reports including all traceability information. Upcoming changes are incorporated as they are adopted.
LMG Test Suite
Mechanical and environmental data, perfectly synchronized
The optional PSI adds fast analog inputs, switching inputs and outputs, torque/speed/frequency inputs, and 32 analog outputs — all sampled in synchronization with the power channels. Torque, speed, temperature, and pressure can be acquired alongside voltage and current, and external devices can be triggered or driven directly from measured values.
No need to stop at seven channels
Multiple LMG600 units can be linked via sync cable to form a single virtual analyzer, automatically aligning cycle timing, system time, transient trigger events, and the state of energy integration. Whether you need eight channels or many more, the measurement remains coherent across all chassis with no manual reconciliation required.
From microamps to 32 amps without changing ranges
Compliance procedures such as IEC 62301 and EN 50564 require uninterrupted observation across widely varying load conditions. The LMG600 Series offers a continuous dynamic range from 500 µA to 32 A and 3 mV to 1000 V, with 18-bit resolution and a 10 ms minimum cycle time. Standby and full-load conditions can be characterized in a single, uninterrupted run, with 0.015% basic accuracy preserved even near the bottom of a range.
Номер заказа 1603.5970.02
Номер заказа 1603.0049.02
Номер заказа 1603.5905.02
Номер заказа 1603.0003.02
Номер заказа 1603.5892.02
Номер заказа 1603.5886.02
| Electrical specifications | ||
| Analog Bandwidth | S Channel | DC to 10 MHz |
| A Channel | DC to 10 MHz | |
| B Channel | DC to 500 kHz | |
| C Channel | DC to 10 kHz | |
| Best power accuracy | S Channel | 0.015% + 0.01% |
| A Channel | 0.015% + 0.01% | |
| B Channel | 0.05% + 0.02% | |
| C Channel | 0.03% + 0.01% | |
| Maximum input voltage | Direct Connection | 1000 V |
| Maximum input current | Direct Connection | 32 A |
| Voltage range extension | S Channel | 1500 VDC |
| Maximum Sampling Rate | 1.21 MS/s | |
| Voltage Input Impedance | 2.69 MΩ || 4 pF | |
| Earth Capacitance | 90 pF | |
| Measured voltage rating | 300 V CAT IV, 600 V CAT III, 1000 V CAT II, 1500 V DC | |
| Protection against earth | From input to PE | 300 V CAT IV, 600 V CAT III, 1000 V CAT II |
| DC- optimized | S Channel | ● |
| Display and interfaces | ||
| Display | LMG611, LMG641 | 7" Touchscreen |
| LMG671 | 10.1" Touchscreen | |
| Remote control interfaces | USB, LAN, RS-232 | |
| Additional inputs/outputs | ||
| Fast analog inputs | 2 inputs, 150 kS/s, 16 bit, BNC | |
| Analog inputs | 8 inputs, 100 S/s, 16 bit, D-Sub:DE-09 | |
| Analog outputs | 32 outputs, output per cycle, 14 bit, D-Sub: DA-15 & DB-25 | |
| Switching outputs | 8 outputs: 6 switches with 2 connections each and 2 switching outputs with common negative, D-Sub: DB-25 | |
| Switching inputs | 8 inputs: 150 kS / s, in two groups 4 inputs each with common ground, D-Sub: DB-25 | |
| Speed-/torque-/frequency inputs | 150 kS/s, D-Sub: DA-15 | |
| Special functions | ||
| Scope function | Graphical display of sample values over time in two scopes with 8 signals each | |
| Plot function | Two time (trend-) diagrams of max. 8 parameters each, max. resolution 10 ms | |
| Star-delta conversion | LMG641, LMG671, LMG671-ATE | Conversion of line voltages to phase voltages and computation of resulting active power |
| Harmonics | Up to 2,000th order | |
| Flicker | According to IEC EN 61000-4-15 | |
| LMG Test Suite | Conformity tests according to: IEC EN 61000-3-2 & 61000-3-12 for harmonics IEC EN 61000-3-3 & 61000-3-11 for flicker IEC 62301 & EN 50564 for standby power |
|
| General data | ||
| Dimensions (W x H x D) | LMG611 | 433 mm x 177 mm x 200 mm |
| LMG641 | 284 mm x 177 mm x 590 mm | |
| LMG671 | 433 mm x 177 mm x 590 mm | |
| LMG671-ATE | 84 HP x 4 RU x 590 mm | |
| Weight | LMG611 | Max. 7.2 kg |
| LMG641 | Max. 15.5 kg | |
| LMG671, LMG671-ATE | Max. 18.5 kg | |
| Rated mains voltage and frequency range | 100 v to 230 V, 47 to 63 Hz | |
| Rated power | LMG611, LMG641 | Max. 200 W |
| LMG671, LMG671-ATE | Max. 400 W | |
Номер заказа 1603.5934.02
S-Channel for high-precision wideband measurements
Supports DualPath. DC-Optimized.
Bandwidth: DC - 10 kHz
Best power accuracy: 0.015 % + 0.01 %
Resolution: 18 bit
Номер заказа 1603.5928.02
C-Channel for high-precision measurements
Bandwidth: DC - 10 kHz
Best power accuracy: 0.03 % + 0.01 %
Resolution: 18 bit
Номер заказа 1603.5911.02
B-Channel for universal measurement applications
Supports DualPath.
Bandwidth: DC - 500 kHz
Best power accuracy: 0.05 % + 0.02 %
Resolution: 16 bit
Номер заказа 1603.0132.02
A-Channel for high-precision wideband measurements
Supports DualPath.
Bandwidth: DC - 10 kHz
Best power accuracy: 0.015 % + 0.01 %
Resolution: 18 bit
Номер заказа 1603.1097.02
Voltage range extension to 1500 V DC for S-Channel (L60-CH-S3)
Номер заказа 1603.0110.02
Process Signal Interface
8 digital inputs, 8 digital outputs, 2 fast analog inputs (150 kS/s, 15 kHz), 8 slow analog inputs, 32 analog outputs, 2 frequency inputs (freq., or., pos.; DTL, HTL or diff.)
Номер заказа 1603.1200.02
Sample Value Analysis Module
Software for continuous and gapless streaming of sample values on 16 tracks at a rate of 10 kS/s (up to 1.2 MS/s under optimal conditions).
Номер заказа 1603.0890.02
Smart Vision
Smart add-on functions for the convenient evaluation of measurements
Номер заказа 1603.0878.02
Harmonic analysis of U, I, P, Q and S
Up to 1000 Harmonics in the instrument, up to 2000 Harmonics via interface
Номер заказа 1603.0861.02
Flicker meter according to EN61000-4-15
Номер заказа 1603.0855.02
Event Triggering
Triggering on crossing voltage or current thresholds recording of 16 tracks with up to 16 million values each
Номер заказа 1603.0826.02
Star-Delta-Conversion
Minimum requirement LMG600 with at least 3 power channels of the same type
Номер заказа 1603.1251.02
Option Package CE Standby Power
LMG Test Suite for measurement standby power and creation of the standard-compliant documentation underlying Directive 2008/28/EC (former 2005/32/EC) or IEC 62301 or EN 50564
Номер заказа 1603.1239.02
Option Package CE Harmonics
LMG Test Suite for analysis of measured values according to EN61000-3-2 and EN61000-3-12 for 1-phase and 3-phase equipment under test
Номер заказа 1603.1222.02
Option Package CE Flicker
LMG Test Suite for analysis of measured values according to EN61000-3-3 and EN61000-3-11 for 1-phase and 3-phase equipment under test
Номер заказа 1603.1900.02
Precision Current Transducer 600 Arms
Max. Bandwidth: 500 kHz
Best accuracy: ±0.0015%
Nominal DC current: ±900 A
Номер заказа 1603.1880.02
Precision Current Transducer 200 Arms
Max. Bandwidth: 1 MHz
Best accuracy: ±0.0035%
Nominal DC current: ±300 A
Номер заказа 1603.1874.02
Precision Current Transducer 1200 Arms
Max. Bandwidth: 400 kHz
Best accuracy: ±0.0015%
Nominal DC current: ±1500 A
Номер заказа 1603.1897.02
Precision Current Transducer 2000 Arms
Max. Bandwidth: 300 kHz
Best accuracy: ±0.0007%
Nominal DC current: ±3000 A
Номер заказа 1603.1845.02
2 m D-SUB interconnection cable for PCT Sensors
Номер заказа 1603.1922.02
Power Supply Unit for up to 4 PCT Sensors
4-channel system interface unit for ultra-stable, high precision fluxgate PCT Sensors. Powers up to 4 PCTs at the same time.
Compact 19" design with 1HU.
Номер заказа 1603.1951.02
PCT Connecting Cable
Length: 2.5 m
Adapter L60-X-ADSE required for connection to LMG600 Series.
Номер заказа 1603.1100.02
Adapter for LMG600 Series to PCT Sensors
Номер заказа 1603.0849.02
CAN bus interface
Bidirectional CAN bus connectivity according to ISO 11898-2 (high-speed CAN)
Номер заказа 1603.0903.02
DVI Interface
For connection of an external display, beamer, touch device
Номер заказа 1603.1122.02
19 inch rack mount kit for LMG641
Номер заказа 1603.1145.02
19 inch rack mount kit for LMG671
Номер заказа 1603.1151.02
2 x Handles for LMG671
2 pcs. for front face, CNC milled and powder-coated
Номер заказа 1603.1168.02
4 x Handles for LMG671
4 pcs. for front and back face, CNC milled and powder-coated
Номер заказа 1603.0910.02
256 GB Mass Storage Device for Measurement Results
Internal mass storage device for long-time recording of measurements.
Сопутствующие товары
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Условия и положения участия в розыгрыше призов «Осциллографы Rohde & Schwarz — 10 лет на рынке»
1. Розыгрыш призов «Осциллографы Rohde & Schwarz — 10 лет на рынке» (далее «Розыгрыш») проводится компанией Rohde & Schwarz GmbH & Co. KG, адрес: Mühldorfstraße 15, 81671, г. Мюнхен, Германия, тел. +49 89 41 29 0 (далее «R&S»).
2. Желающие принять участие в розыгрыше могут зарегистрироваться в период с 1 января 2020 г. по 31 декабря 2020 г. с указанием ФИО, названия компании и адреса корпоративной электронной почты.
3. Участие является бесплатным и не зависит от покупки товаров или услуг.
4. Участие в розыгрыше и получение призов возможно только для юридических лиц. Физические лицо не может участвовать от собственного имени, но допускается участие в качестве представителя юридического лица при условии заполнения заявки на участие от имени и по поручению юридического лица.
5. Призом в розыгрыше является один из 10 осциллографов R&S®RTB2000 в период с 1 января 2020 г. по 31 декабря 2020 г.:
Приз: 1x цифровой осциллограф R&S®RTB2000
6. Розыгрыш проводится в штаб-квартире Rohde & Schwarz по адресу Mühldorstrasse 15, 81671, г. Мюнхен. Победитель будет оповещен по электронной почте в течение 5 (пяти) рабочих дней.
7. Официальный представитель юридического лица обязуется сообщить Rohde & Schwarz о том, что приз был получен. В случае отказа от получения приза или отсутствии ответа в течение 2 (двух) недель будет определен новый победитель. Если определение победителя в течение 4 (четырех) недель не будет возможным, розыгрыш прекращается и приз отзывается.
8.Сотрудники R&S и члены их семей, а также лица, знакомые с процессом проведения розыгрыша и члены их семей не допускаются к заполнению заявки на участие.
9. Выплата стоимости приза в денежном эквиваленте не допускается. Призы не могут передаваться третьим лицам. Любые налоги, сборы, пошлины, взносы и другие платежи, взимаемые в стране участника, несет участник.
10. Персональные данные обрабатываются только в целях участия в розыгрыше и будут удалены через 4 (четыре) недели по окончании розыгрыша, если не оговорено иное.
11. Любой участник, не выполняющий данные Условия и положения, будет отстранен от участия в розыгрыше компанией R&S. В этом случае призы также могут быть отозваны задним числом. В случае если приз был отозван по причине невыполнения данных Условий и положений участник обязуется вернуть его за собственный счет на адрес R&S, указанный в п. 1, и будет определен новый победитель.
12. Участники не могут претендовать на призы этого розыгрыша, и судебное разбирательство в этом отношении не допускается.
13. Проведение розыгрыша и любые возникшие из него договорные отношения между R&S и соответствующим участником регулируются и толкуются в соответствии с законодательством Германии, без применения коллизионного права. В случае возникновения любых споров, прямо или косвенно связанных с участием в настоящем Розыгрыше, исключительной юрисдикцией обладают суды г. Мюнхена (Германия).
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
