Application Notes for R&S®NGU

Electronic systems like electronic control units (ECU) must pass several stringent qualification tests in order to be approved for automotive use. These tests include a reverse polarity test which is specified as part of ISO 16750‑2. In line with the specification, the electronic module must withstand a negative supply voltage for a specific time without suffering any damage. The R&S®NGU401 source measurement unit (SMU) is ideal to perform this task, plus it provides automated testing capability.

23-May-2022

Battery life time is usually one of the most important specifications for battery-powered devices. Depending on the application, life time requirements can range from tens of hours for typical wearables like smart watches to ten years for smart sensors. Understanding where and when energy is used in order to minimize power consumption is therefore key for any of these devices.The power consumption analysis tool was developed to make it easier for customers to analyze power consumption data collected with either the NGL, NGM or NGU power supplies from Rohde & Schwarz. It allows to easily capture power consumption data and analyze using basic measurements.

31-Jan-2022 | AN-No. 1SL380

Source measure units R&S®NGU401 and R&S®NGU201 are capable of precise current measurements from sub-microampere up to ampere. This application note provides a tool which generates a voltage or current sweep using the arbitrary function of the instruments. A fast log captures voltage and current values during the sweep. Subsequently the application program determines the voltage and current value for each sweep step and plots the results in an I-V curve .The tool can be utilized to characterize all kinds of two-pole devices like diodes, LEDs and solar panels.This application note can also be used in connection with DC power supplies R&S®NGM201 and R&S®NGM202.

15-Feb-2021 | AN-No. 1GP129

All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies. In the case of parallel and serial connections it is usually desired to switch all channels simultaneously on and off for protecting the supplied circuitry and for avoiding overcurrent on other power supply channels.This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.

15-Jun-2020 | AN-No. 1GP126

This application program supports the logging and fast logging functionality of the power supplies R&S® NGM200, NGU201 and NGU401. Standard logging is also supported with power supply R&S® NGL200 and NGP800. Power supplies R&S® NGA100 and NGE100 are supported in the data collection mode. Charting functionality is available for logged voltage, current and power values.

14-Nov-2019 | AN-No. 1GP122

NGE100B, HMC804x, HMP2000, HMP4000, HM8143, NGL200, NGM200, M3SR IN4000A, Power supplies, DC Power supplies, The arbitrary waveform feature o Rohde & Schwarz solutions allow you to simulate device behaviors and replaces basic standalone arbitrary waveform generators. Emulate real-world scenarios with Rohde & Schwarz power supplies NGE100B, HMC804x, HMP2000, HMP4000, HM8143, NGL200, NGM200, M3SR IN4000A

04-Nov-2019