R&S®ZN-Z8x switch matrix

R&S®ZN-Z8x switch matrix
Open Lightbox
R&S®ZN-Z8x switch matrix, Side view

Key facts

  • Full crossbar measurements up to 48 ports
  • Easy setup with the R&S®ZNB; R&S®ZND; R&S®ZNBT
  • Ready to use, no need to configure matrix hardware externally
  • Supports use of automated calibration units with up to 24 ports
  • Remote control: LAN, USB, Direct Connect
  • 3-year warranty extension

Engineered for multiport VNA measurements

Components used in modern communications equipment, such as frontend smartphone and tablet PC frontend modules, must support ever more frequency bands and functions such as WLAN, Bluetooth® and GPS. This means the number of module RF ports is also growing, not least due to the use of various different components. The R&S®ZNB in combination with various switch matrices provides a comprehensive solution for complex measurements of  modules with up to 48 ports. Rohde & Schwarz matrices deliver full crossbar measurements, enabling determination of all multiport DUT S-parameters.

Features & benefits

Easy configuration

Configure a multiport VNA with the push of a button

The R&S®ZNB controls switch matrices via LAN, USB or dedicated digital interface. A four-port VNA model allows up to two switch matrices to be combined for characterizing a DUT with up to 48 ports. Once a matrix is connected, the R&S®ZNB automatically detects the matrix and assigns test ports to immediately start measuring. Measurement parameters are directly selected and displayed on the user interface, eliminating the need for additional software.

Automatic assignment of test ports in the R&S®ZNB
Open Lightbox

Automatic assignment of test ports in the R&S®ZNB

RF characteristics

Fast measurements and excellent RF characteristics

Switch matrices from Rohde & Schwarz have very short switching times for enhanced measurement speed especially for sweeps of a small number of points. The compact design and state-of-the-art electronic switches in the R&S®ZN-Z84 and R&S®ZN-Z85 switch matrices have low insertion loss. Other highlights include good test port match and a high compression point for measurements on active DUTs with output power levels up to +20 dBm.

Open Lightbox

Calibration

Easy calibration with multiport calibration unit

Calibrating multiple ports is not easy, especially when it has to be done manually. Rohde & Schwarz has multiport calibration units where each port must only be connected once, making things much easier when up to 48 ports have to be calibrated. For even more convenience, the R&S®ZN-Z154 can be also be used to calibrate up to 24 ports at once.

Open Lightbox

Diverse application

Matrix solutions for every application

Rohde & Schwarz has switch matrices for many applications. Matrix models are available with up to 20 GHz and 24 outputs. Users can select the optimum configuration for low insertion loss, maximum accuracy and a high port number. A four-port R&S®ZNB can also be combined with a two input matrix (mixed configuration). The remaining two ports on the network analyzer can be used as regular VNA ports with the superior R&S®ZNB performance.

Mixed configuration: analyzer and matrix plus high-performance VNA ports
Open Lightbox

Mixed configuration: analyzer and matrix plus high-performance VNA ports

Available models

Available models
Models
Type
Frequency range
Number of ports
Connector type
Description
R&S®ZN-Z84

R&S®ZN-Z84

Order number 1319.4500.02

Type
Switch matrix
Frequency range
10 MHz to 8.5 GHz
Number of ports
up to 24 test ports
Connector type
SMA (f)
Description
Switch matrix to support full crossbar measurements up to 48 ports. Easy setup with the R&S®ZNB, R&S®ZNBT or R&S®ZND families.
R&S®ZN-Z85

R&S®ZN-Z85

Order number 1326.4777.03

Type
Switch matrix
Frequency range
10 MHz to 20 GHz
Number of ports
up to 12 test ports
Connector type
SMA (f)
Description
Switch matrix to support full crossbar measurements up to 12 ports. Easy setup with the R&S®ZNB, R&S®ZNBT and R&S®ZND families.

Available options

Configurable R&S®ZN-Z84 switch matrix up to 8.5 GHz
Product
Description
R&S®ZN-Z84-B22

Order number 1319.4969.22

Description

Additional test ports 7 to 12, 2 VNA ports to 12 test ports

The R&S®ZN-Z84 base unit is a prerequisite.

R&S®ZN-Z84-B24

Order number 1319.4969.24

Description

Additional test ports 7 to 12, 4 VNA ports to 12 test ports

The R&S®ZN-Z84 base unit is a prerequisite.

R&S®ZN-Z84-B32

Order number 1319.4969.32

Description

Additional test ports 13 to 18, 2 VNA ports to 18 test ports

The R&S®ZN-Z84 base unit and R&S®ZN-Z84-B22 are prerequisites.

R&S®ZN-Z84-B34

Order number 1319.4969.34

Description

Additional test ports 13 to 18, 4 VNA ports to 18 test ports

The R&S®ZN-Z84 base unit and R&S®ZN-Z84-B24 are prerequisites.

R&S®ZN-Z84-B42

Order number 1319.4969.42

Description

Additional test ports 19 to 24, 2 VNA ports to 24 test ports

The R&S®ZN-Z84 base unit and the R&S®ZN-Z84-B32 are prerequisites.

R&S®ZN-Z84-B44

Order number 1319.4969.44

Description

Additional test ports 19 to 24, 4 VNA ports to 24 test ports

The R&S®ZN-Z84 base unit and the R&S®ZN-Z84-B34 are prerequisites.

Configurable Switch Matrix R&S®ZN-Z85 up to 20 GHz
Product
Description
R&S®ZN-Z85-B24

Order number 1326.4831.26

Description

Additional test ports 7 to 12, 4 VNA ports to 12 ports

General accessories
Product
Description
R&S®ZN-Z28

Order number 1326.6605.02

Description

Semi-rigid cables N (m) - 3.5 mm (m)

Connects two 2-to-24 port R&S®ZN-Z84 units to a four-port R&S®ZNB4/8

R&S®ZN-B121

Order number 1323.9290.00

Description

Direct control cable

R&S®ZZA-KN2

Order number 1175.3010.00

Description

19" Rack Adapter

For mounting a 19" housing 2 RU high in a standard 19" rack

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.