The flexibility of the R&S®ATS1000 and the variable height of the elevation arm results in a customizable range length, allowing farfield measurements in a compact setup.

Describes all chamber functions.

The R&S®ATS1000 is a highly accurate solution for testing 5G antennas up to millimeterwave frequencies in a mobile shielded chamber.

The R&S®ATS1000 antenna test chamber is the ideal environment for 5G antenna characterization throughout the entire process from R&D to production for both active and passive devices.

This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required calibration of the measurement setup and a possible near field to far field transformation when measuring larger devices.

28-May-2018 | AN-No. 1MA304

With its small footprint, the R&S®ATS1000 antenna test system is the ideal direct far-field OTA system to test phased array antennas. The system tests and optimizes the radiation characteristics of any modules using the AiP technology from 18 GHz to 87 GHz.

12-Mar-2020

Fault identification in single elements of antenna arrays by scanning in near-field range and applying the near-field to far-field transformation method.

24-Mar-2020

Describes all functions of the device.

LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.

31-Aug-2017 | AN-No. 1ST001

In wireless communications, an antenna is an essential device made of conductive metal that transmits or receives electromagnetic radio waves. As the main enabler of wireless communications, antennas must satisfy a number of challenging parameters such as a wide frequency range, flat gain curves and high mechanical stability, so that they can support an ever increasing range of applications.Wireless communications testing requires over-the-air (OTA) test systems with various antenna types that serve different system functions. A variety of basic antenna designs have become established over time. These include standard gain horn, Vivaldi, patch and array antennas. Each has unique features that make them ideal for a specific application.Test antennas /probes, link/communications antennas and calibration antennas are used in OTA test systems.

High precision test solutions for todays and tomorrows ADAS-radar

Rohde & Schwarz gives you the benefit of a well-coordinated portfolio of conducted and OTA test solutions.

Rohde & Schwarz presents the R&S®ATS1000 antenna test system, a highly accurate solution for testing 5G antennas up to mmWave frequencies in a mobile shielded chamber.

17-Oct-2017

The R&S®QuickStep ATSCAL application supports over-the-air (OTA) calibration and basic measurements in combination with the R&S®ATS family of anechoic chambers. Multiple Rohde & Schwarz RF instrument combinations and positioners are supported. A streamlined graphical user interface (GUI) simplifies parametrization and execution of the OTA calibration and measurements.

The R&S®ATS800B CATR benchtop antenna test system is the ideal environment for 5G antenna, and device characterization.

The R&S®ATS800R CATR rack based antenna test system is the ideal environment for 5G antenna, and device characterization.

The R&S®ATS1800C CATR based compact 5G NR mmWave test chamber is THE turnkey chamber for far-field OTA RF measurements of 5G related devices and components.

NRPM OTA Power Measurement Solution - extremely accurate power measurement for CW or modulated signals. 18 GHz to 90 GHz for 5G, WLAN 802.11ad and 802.11ay

15-Feb-2018 | Press Release | Test & measurement

With the new R&S ATS1000 all-in-one antenna test system, active and passive antennas as well as transceivers for future fifth generation (5G) mobile networks can be tested in a compact, moveable shielded RF test chamber. This enables far-field antenna characterizations and initial RF measurements for 3GPP 5G NR in the millimeter wavelength range.

More: https://www.rohde-schwarz.com/wireless/B5G ThinkSix, B5G, beyond 5G, 6G, sub-terahertz, ATS1000, ZNA, D-Band This video demonstrates the R&S®ATS1000 antenna test system from Rohde & Schwarz, now supporting frequencies up to 170 GHz.

22-Jan-2019 | Press Release | Test & measurement

Rohde & Schwarz has developed a setup that enables 3D RF measurements of antenna characteristics in a temperature range from –20 °C to +85 °C . Integrating the R&S ATS-TEMP climate option into an R&S ATS1000 antenna test system makes it possible for the first time ever to combine testing in an RF OTA chamber and climatic chamber testing into a single procedure, saving engineers measurement time.

The ATS1000 simplifies the testing needs because no mechanical modification and no additional RF cabling is required to measure the amplitude and phase coherent response of an unknown DUT in the frequency range from 110 GHz to 170 GHz. 6G antenna measurements, 6G antenna radiation pattern, 6G antenna charactization in D-band, Phase coherent measurements up to 170 GHz The ATS1000 CATR based 5G NR mmWave

The scalable R&S®ATS1000 antenna test system supports 3D antenna characterization, beamforming testing as well as near-field to far-field transformation. The system even enables far-field measurements for 5G frequencies such as 28 GHz and 39 GHz in a compact setup.

MWC2018, ATS1000, 5G OTA test, 5G RF test, antenna test, 5G RF performance, GSMA, Mobile World Congress OTA RF performance testing for 5G NR presented at MWC 2018

Together with the R&S®ATS1000 shielded chamber, it offers a compact solution in a minimum footprint – perfect for lean production environments. video, AREG100A, ATS100 Rohde & Schwarz demonstrated the all-in-one test solution for the production of automotive radar sensors at European Microwave Week 2017 in Nuremberg

The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mmWave, 5G NR, 3GPP, antenna test, conformance testing, over the air, OTA testing, thermal testing, far-field, near-field, EIRP, ATS1000, PWC200 The video discusses various solutions for over-the-air (OTA) testing for 5G NR devices and base stations based on test

The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mmWave, 5G NR, 3GPP, antenna test, conformance testing, compact antenna test range, CATR, over the air, OTA testing, far-field, near-field, massive MIMO, peak beam, directivity, EIRP, ATS1000, PWC200, WPTC This video answers common questions that arise with 5G over

Discover compact, turnkey, over-the-air (OTA) test solutions to fully characterize your 5G devices and active antenna systems. Read more to be ahead.

17-Dec-2020 | Press Release | Automotive

Academia and key industry players have identified the D-Band, ranging from 110 GHz to 170 GHz, as a candidate frequency band for beyond 5G and 6G mobile communications as well as for future automotive radar applications. Rohde & Schwarz continues its pioneering sub-THz research efforts with focus in this frequency range, reaching new milestones. In collaboration with IHP, Rohde & Schwarz has performed the industry’s first full 2D/3D antenna characterization of transceiver modules operating in the D-Band.

Come and join us at this years European Microwave Central Europe 2019 trade show to get insights in RF and component testing, A&D, radar and 5G NR test and measurement solutions from Rohde & Schwarz