240 Résultats
Interactive description on how to install and set up the system for first use.
Instrument security procedures for the R&S®CMA180 radio test set from Rohde & Schwarz.
Jennifer describes her motivation to set new standards and develop something that doesn't exist yet. Jennifer describes her motivation to set new standards and develop something that doesn't exist yet. navy, naval, development, test, Satcom, job, career Jennifer describes her motivation to set new standards and develop something that doesn't exist yet.
I would like to do a Reference Calibration using ELEKTRA and Field Probe. For this I have to do Reference Calibrations at 16 positions, this does mean my Field Probe have to be set to each of the 16 predefined points. I set the probe positions manually, so an error can occur by mistake. Is it possible to repeat a measurement for a sensor position, if needed?
The R&S®HA-Z24E External Preamplifier Manual describes how to set up the preamplifier, how to read out the s-parameters using the provided software, and how to insert the preampifier in a measurement setup. It also includes safety information and a performance test to check the preamplifier's performance.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices. EMC compliance testing,Device List Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices..
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware. EMC compliance testing, Hardware setup Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware.
Kindly help me to run the software.After installation, I am getting error message to run the software.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching. EMC compliance testing, Path switching Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching.
Sep 04, 2023
Rohde & Schwarz unveils the future of security solutions with advanced scanner portfolio at International Security Expo 2023Rohde & Schwarz participates in the annual International Security Expo, taking place in Olympia, London, from September 26-27, 2023. At booth D20 Rohde & Schwarz will showcase its revolutionary R&S QPS product family, featuring the R&S QPS201 and R&S QPS Walk2000 security scanners for advanced people screening.
Jul 03, 2023
Rohde & Schwarz and MediaTek verify industry's first 3GPP Rel. 17 NTN NB-IoT protocol conformance test casesRohde & Schwarz has partnered with MediaTek to verify the first NTN NB-IoT protocol conformance test cases in line with 3GPP Rel. 17 on MediaTek’s NTN IoT capable MT6825 chipset. This achievement is the next step towards NTN device conformity approval bringing next-generation IoT devices based on non-terrestrial networks (NTN) to the market.
Jan 23, 2024
Rohde & Schwarz to host Demystifying EMC conference as full day webinar in 2024Rohde & Schwarz hosts its popular industry event, Demystifying EMC, on February 6, 2024. The one-day virtual conference kicks off a program of EMC industry expert sessions.
Then we compare the uncertainty with the QAR50-Z44 verification set.
Mar 07, 2024
Rohde & Schwarz introduces dedicated phase noise analysis and VCO measurements up to 50 GHz with the R&S FSPN50With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.
May 23, 2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.
Apr 10, 2024
Rohde & Schwarz launches new era of efficient, sustainable, and smart broadcast transmissionThe new R&S®TE1 is industry’s most sustainable transmitter; product debut comes alongside introduction of 24/7 remote monitoring service
This video introduces the Entry Level set and shows the step-by-step Conducted Emissions measurements using FPC1000, LISN and EMI Software. This video introduces the Entry Level set and shows the step-by-step Conducted Emissions measurements using FPC1000, LISN and EMI Software.
Interactive description on how to install and set up SpycerNode2 for first use.
Mar 26, 2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
May 07, 2024
Softil, Rohde & Schwarz and Alea launch the world’s first mission-critical communications field test ecosystemWorld’s first mission-critical communications field test ecosystem launched by MCX leaders: Rohde & Schwarz integrates MCX into automated field test devices. Softil provides all 3GPP compliant software functions for MCX communications, Alea supports the ecosystem with its test server infrastructure.
May 15, 2024
Rohde & Schwarz introduces the MXO 5C series, the world’s most compact oscilloscope with up to 2 GHz bandwidthThe new MXO 5C is the first oscilloscope without an integrated display from Rohde & Schwarz. It delivers the same peformance as the previously introduced MXO 5 series, but with a fourth of the vertical height.
Interactive description on how to install and set up the system for first use.
Interactive description on how to install and set up the system for first use.
Interactive description on how to install and set up the system for first use.
I want to set the acquisition mode to Average + HR using SCPI commands. But I can not find the right command in the manual.
Feb 21, 2024
Skylo achieves successful phase 1 validation of NTN test plan with Rohde & SchwarzRohde & Schwarz has reached a major milestone: its NTN Netop test solutions have been accepted as part of Skylo’s NTN Certification Program.
Aug 03, 2022
Rohde & Schwarz announces comprehensive test solutions for 5G NR Release 17The latest features included in 5G NR Release 17 are set to improve system performance and enable expansion into new applications. To address testing challenges in these latest demanding 5G standards, Rohde & Schwarz has introduced a comprehensive set of coordinated software options for its vector signal generators and signal and spectrum analyzers.
R&S®MXO 4 Getting Started manual; provides the information needed to set up and start working with the instrument. Safety information is also included.
Rohde & Schwarz Getting Started for the MXO 5, containing the information needed to set up and start working with the instrument and safety information.
Rohde & Schwarz Getting Started for the MXO 5C, containing the information needed to set up and start working with the instrument and safety information.