R&S®ZN-Z5x automatic calibration units

Models up to 50 GHz,  with 2 and 4 ports, configurable ports

R&S®ZN-Z5x automatic calibration units
Abrir Lightbox
R&S®ZN-Z5x automatic calibration units
Abrir Lightbox
R&S®ZN-Z5x automatic calibration units
Abrir Lightbox
R&S®ZN-Z5x automatic calibration units
Abrir Lightbox
R&S®ZN-Z5x automatic calibration units, 3D R&S®ZN-Z5x automatic calibration units, Side view R&S®ZN-Z5x automatic calibration units, Side view R&S®ZN-Z5x automatic calibration units, Side view

Key Facts

  • Wide frequency range 9 kHz to 50 GHz
  • Virtually no warm-up time required
  • Auto-detection and USB control
  • Multiport calibration supported

High-end automatic VNA calibration units

Covering 8.5 GHz to 50 GHz, 2 and 4 ports, configurable

The models cover the frequency range from 9 kHz to 50 GHz, with type N, 3.5 mm, 2.92 mm and 2.4 mm connectors depending on the frequency range. They are available with 2 or 4 ports. With re-connection, also multiport calibration of R&S®ZNBT, R&S®ZNB and switch matrix systems is supported. The R&S®ZN-Z51 ranges up to 8.5 GHz and enables each port to be configured individually: the standard versions are 3.5 mm(f) and type N(f) ports, but each port can be ordered individually as 3.5 mm (f or m), N (f or m), 7/16 (f or m) or 4.3-10.

Features & benefits

Wide frequency range

Covering a total of 9 kHz to 50 GHz

The frequency range of the ZN-Z5x automatic calibration units supports the main frequency ranges of the Rohde & Schwarz network analyzers. The high frequency models offer lower frequencies of 100 kHz and 9 kHz to cover a broad range of applications.

Configurable test port types

Support of mixed connector systems

Each port on the 8.5 GHz ZN-Z51 models (2 port *.72 and 4 port *.74) can be individually configured. Each port can be permanently changed to N(m), 3.5 mm (m,f), 7/16 (m,f), 4.3-10 (f) (see options).

Auto configuration and detection

Plug and play calibration

The ZN-Z5x calibration units are detected automatically via the USB connection. All required data is transferred to the VNA. When starting the calibration, the port assignment can be found with a keystroke. The calibration can be launched with minimum effort, time and highest reliability.

Available models

Available models
Modelos
Type
Frequency range
Connector type
Number of ports
Description

R&S®ZN-Z50

Order Number 1335.6904.30

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 9 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z50

Order Number 1335.6904.32

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z51

Order Number 1319.5507.32

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
3.5 mm(f)
Number of ports
2 ports
Description
-

R&S®ZN-Z51

Order Number 1319.5507.34

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
3.5 mm(f)
Number of ports
4 ports
Description
-

R&S®ZN-Z51

Order Number 1319.5507.72

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
N(f)
Number of ports
2 ports
Description
It is possible to individually configure each port of this Calibration Unit. Each Port can be permanently adapted N(m), 3.5mm (m,f), 7/16 (m,f), 4.3-10 (f).

R&S®ZN-Z51

Order Number 1319.5507.74

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
N(f)
Number of ports
4 ports
Description
It is possible to individually configure each port of this Calibration Unit. Each Port can be permanently adapted N(m), 3.5mm (m,f), 7/16 (m,f), 4.3-10 (f).

R&S®ZN-Z52

Order Number 1335.6991.30

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
4 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z53

Order Number 1335.7046.32

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z53

Order Number 1335.7046.72

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 18 GHz
Connector type
N (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z54

Order Number 1335.7117.92

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 40 GHz
Connector type
2.92 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z55

Order Number 1335.7181.42

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 50 GHz
Connector type
2.4 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

Available options

General
Product
Descripción
R&S®ZNZ51-B130

Order Number 1319.5720.11

Descripción

Calibration Unit

GT ZNZ51-B130 CONNECTOR PORT1 3.5MM(F)

R&S®ZNZ51-B131

Order Number 1319.5736.11

Descripción

Calibration Unit

GT ZNZ51-B131 CONNECTOR PORT1 3.5MM(M)

R&S®ZNZ51-B140

Order Number 1319.5871.11

Descripción

Calibration Unit

GT ZNZ51-B140 CONNECTOR P1 4.3-10 (F)

R&S®ZNZ51-B160

Order Number 1319.5742.11

Descripción

Calibration Unit

GT ZNZ51-B160 CONNECTOR PORT1 7/16(F)

R&S®ZNZ51-B161

Order Number 1319.5759.11

Descripción

Calibration Unit

GT ZNZ51-B161 CONNECTOR PORT1 7/16(M)

R&S®ZNZ51-B171

Order Number 1319.5713.11

Descripción

Calibration Unit

GT ZNZ51-B171 CONNECTOR PORT1 N(M)

R&S®ZNZ51-B230

Order Number 1319.5720.12

Descripción

Calibration Unit

GT ZNZ51-B230 CONNECTOR PORT2 3.5MM(F)

R&S®ZNZ51-B231

Order Number 1319.5736.12

Descripción

Calibration Unit

GT ZNZ51-B231 CONNECTOR PORT2 3.5MM(M)

R&S®ZNZ51-B240

Order Number 1319.5871.12

Descripción

Calibration Unit

GT ZNZ51-B240 CONNECTOR P2 4.3-10 (F)

R&S®ZNZ51-B260

Order Number 1319.5742.12

Descripción

Calibration Unit

GT ZNZ51-B260 CONNECTOR PORT2 7/16(F)

R&S®ZNZ51-B261

Order Number 1319.5759.12

Descripción

Calibration Unit

GT ZNZ51-B261 CONNECTOR PORT2 7/16(M)

R&S®ZNZ51-B271

Order Number 1319.5713.12

Descripción

Calibration Unit

GT ZNZ51-B271 CONNECTOR PORT2 N(M)

R&S®ZNZ51-B330

Order Number 1319.5720.13

Descripción

Calibration Unit

GT ZNZ51-B330 CONNECTOR PORT3 3.5MM(F)

R&S®ZNZ51-B331

Order Number 1319.5736.13

Descripción

Calibration Unit

GT ZNZ51-B331 CONNECTOR PORT3 3.5MM(M)

R&S®ZNZ51-B340

Order Number 1319.5871.13

Descripción

Calibration Unit

GT ZNZ51-B340 CONNECTOR P3 4.3-10 (F)

R&S®ZNZ51-B360

Order Number 1319.5742.13

Descripción

Calibration Unit

GT ZNZ51-B360 CONNECTOR PORT3 7/16(F)

R&S®ZNZ51-B361

Order Number 1319.5759.13

Descripción

Calibration Unit

GT ZNZ51-B361 CONNECTOR PORT3 7/16(M)

R&S®ZNZ51-B371

Order Number 1319.5713.13

Descripción

Calibration Unit

GT ZNZ51-B371 CONNECTOR PORT3 N(M)

R&S®ZNZ51-B430

Order Number 1319.5720.14

Descripción

Calibration Unit

GT ZNZ51-B430 CONNECTOR PORT4 3.5MM(F)

R&S®ZNZ51-B431

Order Number 1319.5736.14

Descripción

Calibration Unit

GT ZNZ51-B431 CONNECTOR PORT4 3.5MM(M)

R&S®ZNZ51-B440

Order Number 1319.5871.14

Descripción

Calibration Unit

GT ZNZ51-B440 CONNECTOR P4 4.3-10 (F)

R&S®ZNZ51-B460

Order Number 1319.5742.14

Descripción

Calibration Unit

GT ZNZ51-B460 CONNECTOR PORT4 7/16(F)

R&S®ZNZ51-B461

Order Number 1319.5759.14

Descripción

Calibration Unit

GT ZNZ51-B461 CONNECTOR PORT4 7/16(M)

R&S®ZNZ51-B471

Order Number 1319.5713.14

Descripción

Calibration Unit

GT ZNZ51-B471 CONNECTOR PORT4 N(M)

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.