R&S®TLU9 Low-Power UHF Transmitter and GapFiller Family

Powerful, reliable, smart

Key facts

  • Highest availability in its power class
  • 25 % energy cost savings
  • Best serviceability in its class

Brief description

From commissioning to servicing, the R&S®TLU9 Transmitter and GapFiller family offers the highest reliability, ensuring troublefree operation during the device’s lifetime.

Features & Benefits

  • Smooth operation
  • Unparalleled gap filler performance
  • Best-in-class TCO
  • Straightforward serviceability

Specifications

Digital TV
Standards DVB-T, DVB-T2, ISDB-TB

Key facts

  • Highest availability in its power class
  • 25 % energy cost savings
  • Best serviceability in its class
  • Most compact low-power transmitter and gap filler
  • World-class echo cancellation with R&S®smartEC

Brief description

From commissioning to servicing, the R&S®TLU9 Transmitter and GapFiller family offers the highest reliability, ensuring troublefree operation during the device’s lifetime. The product is very convenient to use, thanks to features such as adaptive digital predistortion and an intuitive graphical user interface. The use of premium RF components and sophisticated design deliver high availability, with the highest MTBF values on the market.

Features & Benefits

  • Smooth operation
    • Robust and versatile
      • Premium components and extremely robust design
      • R&S®THU9 experience in only two height units
    • Reliable and innovative
      • Integrated exciter backup battery bridges voltage drops
      • Innovative redundancy configurations
  • Unparalleled gap filler performance
    • Integrated input filter
    • World-class echo cancellation for best signal quality
    • R&S®smartEC – continuous self-optimization
  • Best-in-class TCO
    • 35 % lower OPEX
    • 25 % higher efficiency than competing products
    • Designed for low service costs
    • 200 W in only two height units
  • Straightforward serviceability
    • Servicing at component level thanks to modular design
    • Fully self-adjusting
    • No special knowledge or tools required
  • Easy to set up
    • Convenient graphical user interface
    • Minimal infrastructure requirements, minimal footprint
    • Self-optimizing operation for maximum efficiency
  • Rohde & Schwarz– the partner you can count on
    • Quality transmitters since 1949
    • Spare parts availability for more than 10 years

Specifications

Digital TV    
Standards transmitter DVB-T, DVB-T2, ISDB-TB, ATSC, DTMB
  gap filler DVB-T, DVB-T2, ISDB-TB
Channel bandwidth DVB-T 5/6/7/8 MHz
  DVB‑T2 1.7/5/6/7/8 MHz
  ISDB-T/ISDB-TB, DTMB 6/8 MHz
  ATSC 6 MHz
Inputs of transmitter DVB-T, DVB-T2, DTMB 2 × ASI (BNC, 75 Ω), 2 × TSoIP
(Gigabit Ethernet)
  ISDB-T/ISDB-TB 2 × BTS (BNC, 75 Ω), 2 × TSoIP
(Gigabit Ethernet)
  ATSC 2 × SMPTE310M or 2 × ASI (BNC, 75 Ω),
2 × TSoIP (Gigabit Ethernet)
  DVB-S/DVB-S2 signal feeding (optional) 2 × F (75 Ω)
Inputs of gap filler DVB-T, DVB-T2, ISDB-TB 1 × RF (BNC, 50 Ω)
General data
Frequency range UHF bands IV/V 470 MHz to 790 MHz
(790 MHz to 862 MHz on request)
Supply voltage   100 V to 240 V ±10 %, 2 wires + PE (L1/N/PE),
50 Hz to 60 Hz ±5 %
Max. installation altitude   3000 m above sea level
(> 3000 m on request)
Operating temperature range   +1 ° to +45 °C
Relative humidity (max.)   95 %, non-condensing (indoors)
Immunity 1) to fast transients and bursts in line with IEC 61000-4-4 ±2 kV (AC supply),
±1 kV (signal inputs)
  to surges in line with
IEC 61000-4-5
symmetrical: ±1 kV (e.g. L-N),
asymmetrical: ±2 kV (e.g. L-PE, N-PE)
Synchronization    
Reference frequency   10 MHz, 0.1 V to 5 V (Vpp) or TTL, BNC
Reference pulse   1 Hz, TTL, BNC
GPS/Glonass receiver sensitivity optional for transmitter –150 dBm (typ. –164 dBm), SMA
Integrated OCXO   bridges reference signal interruptions for up to 24 h
Operation    
Status panel with buttons and LEDs   local operation
Display unit with touchscreen optional local display and operation
Ethernet interface, RJ-45   web interface: local, remote
  optional network management interface via SNMP
Parallel remote interface optional floating contacts for messages and commands

1) More stringent requirements must be satisfied by implementing appropriate measures at the transmitter site.

Gracias.

La solicitud se ha enviado correctamente.

En breve nos pondremos en contacto con usted.

Su equipo de servicio Rohde & Schwarz

Solicitar presupuesto

Introduzca su consulta.
Introduzca su nombre.
Introduzca el nombre.
Introduzca una dirección de correo electrónico válida.
Introduzca el nombre de la empresa.
Introduzca el nombre de la ciudad.
Introduzca el código postal.
Introduzca el número de teléfono.

Introduzca el país.
Introduzca los caracteres que se muestran en la imagen
show captcha
Datos incorrectos.
Do not enter data in this field
Gracias.

La solicitud se ha enviado correctamente.

En breve nos pondremos en contacto con usted.

Su equipo de servicio Rohde & Schwarz

Solicitar información

Introduzca su consulta.
Introduzca su nombre.
Introduzca el nombre.
Introduzca una dirección de correo electrónico válida.
Introduzca el nombre de la empresa.
Introduzca el nombre de la ciudad.
Introduzca el código postal.

Introduzca el país.
Introduzca los caracteres que se muestran en la imagen
show captcha
Datos incorrectos.
Do not enter data in this field
International Website