ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 and 4 port models available. ZN-Z51 has configurable test ports.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

Noise figure measurement with vector network analyzers

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

The R&S®ZNB3000 vector network analyzer is optimized for high-volume production and demanding applications, thanks to industry-leading measurement speed, stability and scalability.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

Low speed serial buses such as I2C/SPI, RS-232/UART and Manchester/NRZ on your Rohde & Schwarz instrument. Your oscilloscope can provide a system-level view of one or more serial buses that is time correlated with other system events

The QPS Walk2000 is a walk-through security scanner based on millimeter wave technology.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

R&S®GB5400 controller working position – intuitive VCS interface for full controller flexibility and versatility.

ARDRONIS Effect – détecte et interrompt les drones RC

The R&S®BBA150 is a robust broadband amplifier for EMC applications in the frequency range of 4 kHz to 6 GHz and rf output power up to 3000 W P1dB.

Le R&S®BBA300 est un amplificateur ultra large bande compact et robuste pour une utilisation dans des environnements de test sensibles tels que CEM, validation de produit et coexistence sans fil dans la gamme de fréquence de 380 MHz à 18 GHz et de puissance de sortie RF jusqu'à 300 W P1dB.

Advanced Jitter Analysis for the RTO and RTP oscilloscopes, enabling the decomposition of the total jitter into it its individual components such as Random and Deterministic jitter.