Recherche

Rohde & Schwarz, le spécialiste en test et mesure, propose une large gamme d'alimentations afin de répondre à vos besoins uniques en T&M.

Trouvez l'alimentation DC Rohde & Schwarz qui correspond à vos exigences techniques et aux besoins de votre application.

Découvrez la série d'alimentations DC R&S®NGC100 ‒ compactes, efficaces énergétiquement et idéales pour les laboratoires, la fabrication et l'enseignement. Configurer avec un prix entièrement transparent.

The R&S®NGA100 power supplies are linear, compact and easy to use. All models have excellent readback accuracy with a low-current range for demanding measurements.

R&S®HMP power supplies are primarily designed for industrial use. With two, three or four output channels and up to 10 A output current per channel, these rugged instruments are ideal for a wide variety of applications.

La R&S®NGT3600 définit le nouveau standard en termes d'alimentations DC haute performance, avec deux sorties 1800 W indépendantes au sein d'un seul instrument compact.

Surveillance / Source de tension / courant DC – Unité de surveillance et de source haute précision, alimentation

The two-quadrant (R&S®NGU201) and the four-quadrant (R&S®NGU401, R&S®NGU411) provide up to 60 W of power and measurements with up to 6 ½ digit resolution.

Les amplificateurs RF R&S sont des solutions innovantes dotées d'une performance RF exceptionnelle pour la génération de puissance RF dans la gamme de fréquence allant jusqu'à 20 GHz.

The R&S®BBL200 is a liquide cooled broadband amplifier for high power application up to 10 kW P1dB in the frequency range of 9 kHz to 250 MHz.

Trouvez la bonne solution pour vos tâches de T&M au sein de la gamme complète d'analyseurs de Rohde & Schwarz.

The R&S®FSWP phase noise analyzer combines low‑noise internal sources and real-time cross‑correlation for high sensitivity phase noise measurements.

VHF/UHF nav/drone analyzer for ILS, VOR, MB, GBAS, COM - efficient drone inspection of terrestrial navigation and communications systems

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

mmWave transceiver modules for antenna test systems with the highest dynamic range.

R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

Verification kits are used to perform uncertainty evaluations of vector network analyzers. Option R&S®ZNA-K50(P) provides additional uncertainty analysis.

Network analyzer waveguide calibration kits, up to 1100 GHz, models with sliding match.

Switchable step attenuator, base units up to 6/18 GHz, 0.1/1 dB step size, external modules extend it to 40/67 GHz. Up to 139 dB attenuation range.

ZN-Z1xx (ZN-Z170, ZN-Z135, ZN-Z129, ZN-Z129E up to 43.5 GHz) economy vector network analyzer calibration kits, 4-in-1 design: open, short, match , through combined in a compact unit. Separate male and female models.