Recherche

7layers and Rohde & Schwarz developed jointly with leading chipset manufacturers the first test platform to perform Channel Sounding qualification testing with Bluetooth® RFPHY release 6.0, listed by the Bluetooth® SIG.

15 janv. 2025 | Communiqués de presse | Test & measurement

Rohde & Schwarz and Realtek Semiconductors have successfully validated the industry’s first test solution for the upcoming Bluetooth® LE High Data Throughput (HDT) feature.

3 mars 2026 | Communiqués de presse | Wireless communications

Rohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.

28 mars 2024 | Communiqués de presse | Wireless communications

The next Bluetooth® release is expected to be ratified soon. One important new feature is the Unified Test Protocol (UTP) Test Mode for Bluetooth® Low Energy, that will complement existing test methods. The UTP Test Mode will additionally enable over-the-air (OTA) controlled device testing, which will simplify measurements of small and highly integrated devices enormously, since no direct wired connection to the tester is needed. Rohde & Schwarz and Ceva, in close cooperation, have developed the world’s first test solution for this new test mode, making its debut at embedded world 2025.

5 mars 2025 | Communiqués de presse | Wireless communications

Bluetooth® signal generation for basic rate (BR), enhanced data rate (EDR) and low energy (LE) including channel sounding

The non-cellular expert for WLAN, Bluetooth®, GNSS and various broadcast technologies. The R&S ® CMW270 is a cost-effective alternative for developing and producing equipment outside conventional cellular networks and is especially suited for IoT (Internet of Things) test requirements.

Bluetooth® is the established wireless communications technology for the short range, facilitating both voice and data transmission to create a personal area network.

Découvrez les meilleures solutions pour le Bluetooth® Low Energy Audio. Découvrez les détails du test audio Bluetooth®, et découvrez-en plus à propos de la mesure audio Bluetooth® LE.

Apprenez-en plus à propos de la technologie Bluetooth Classic et découvrez les solutions de test du Bluetooth Classic à la fois pour le Bluetooth® basic rate et le Bluetooth® enhanced data rate.

Obtenez un aperçu de la technologie Bluetooth® Low Energy. Découvrez les subtilités du test du Bluetooth® Low Energy, et découvrez les solutions de test du Bluetooth® Low Energy.

Découvrez comment tester des applications de positionnement Bluetooth®. Trouver des solutions pour le sondage du canal Bluetooth®, les mesures de distance Bluetooth® & les services de localisation BT.

Description des aspects de la technologie Bluetooth Low Energy basée sur la dernière spécification du Bluetooth SIG, différentes options de la couche physique et dernières fonctionnalités.

En savoir plus sur le test d'appareils Bluetooth® & découvrez les solutions de test R&S. Obtenez un guide sur le test de connexion Bluetooth® & découvrez les outils de test R&S.

Solutions de test Rohde & Schwarz dédiées à la vérification de la performance de la connectivité Bluetooth® dans l'automobile, incluant la qualité audio, l'A2DP et le transfert d'annuaire téléphonique.

This video explains different way of testing Bluetooth® Low Energy. The BLE test mode supports all tests in direct test mode (DTM) without the need of a control cable.

Everything you need to know about Bluetooth® Low Energy (LE) in 2020

The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.

Rohde & Schwarz exhibits advanced T&M solutions that address emerging challenges in consumer electronics development at CETEX Consumer Electronics Test & Development Forum and Expo at RAI in Amsterdam.

1 oct. 2024 | Communiqués de presse | Test & measurement

Rohde & Schwarz will present its advanced test and measurement solutions for the embedded industry at the embedded world, to tackle the emerging challenges in all embedded systems: From energy efficiency and electromagnetic interference to digital design and connectivity.

13 févr. 2025 | Communiqués de presse | Test & measurement

Dans cette vidéo, nous présentons l'analyse détaillée d'un signal Bluetooth LE incluant la qualité de modulation et l'erreur de fréquence.

Rohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.

26 mars 2024 | Communiqués de presse | Test & measurement

Rohde & Schwarz présente un test combiné RF et fonctionnel dédié à la signalisation NB-IoT et au Bluetooth® 5.0 LE, lors du GSMA Mobile World Congress 2019 à Barcelone.

Cette vidéo illustre comment mesurer des dispositifs Bluetooth Low Energy (LE) avec la plateforme de test R&S®CMW

Ultra-wideband (UWB) permits short-range, high-bandwidth communications at very low energy levels by using a large portion of the radio spectrum. UWB has traditionally been used for radar imaging with pulsed signals.

Rohde & Schwarz will present its advanced test and measurement solutions for the embedded industry at embedded world Exhibition & Conference in Nuremberg, Germany.

20 févr. 2026 | Communiqués de presse | Test & measurement

Vector signal generator with high output power and modulation bandwidth; internal signal generation for multistandard such as 3GPP LTE, WiMAX, Bluetooth etc.

R&S®CMW290 functional radio communication tester is ideal for testing cellular and non-cellular IoT applications

Découvrez notre gamme complète de produits dédiés au test des normes sans fil. Découvrez des solutions de pointe pour les normes cellulaires et la connectivité sans fil.

Wireless device production test: breakthrough in scalability, measurement accuracy, speed. New generation for test equipment for WiMAX wireless devices

The new trendsetting product for calibrating and verifying mobile phones. A radical new approach for ultimate wireless device production lines.