14-Feb-2024 | Press Releases | MWC 2024

Together, Rohde & Schwarz and Sony Semiconductor Israel (Sony) have achieved the industry’s first 3GPP Rel. 17 NTN NB-IoT RF performance verification. They have also successfully validated PCT-based test cases. Both milestones contribute to the market readiness of NTN NB-IoT technology. At the MWC Barcelona 2024, Rohde & Schwarz will show a live demonstration of NTN NB-IoT testing at the company’s booth with Sony Altair’s NTN Release 17 IoT device.

15-Feb-2024 | Press Releases | MWC 2024

In the evolving landscape of 5G networks, leveraging frequency ranges FR1 (0.41 to 7.125 GHz) and FR2 (24.25 to 71 GHz) has been pivotal. As the era of 5G-Advanced and 6G unfolds, a third frequency range is being discussed in global regulatory and industry consortiums worldwide. FR3, which is also known as upper-midband, spanning 7.125 to 24.25 GHz, will open a new frontier for mobile communication technology. Rohde & Schwarz technology plays a key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3.

12-Sep-2023 | Press Releases | Wireless communications

To support pioneering mmWave and sub-THz research, Rohde & Schwarz continues to roll out advanced RF test and measurement solutions. Three additional products tailored to W and D band applications will be showcased at the EuMW 2023 in Berlin: The new R&S SFI100A wideband IF vector signal generator, the R&S NRP170TWG thermal power sensor and the R&S FE110ST/SR TX/RX frontends. All three enable researchers to characterize devices and circuits for beyond 5G and 6G mobile communications as well as the novel sensing and automotive radar applications of tomorrow.

20-Mar-2025 | Press Releases | Test & measurement

The new EMI test receivers R&S EPL1001 up to 1 GHz and R&S EPL1007 up to 7.125 GHz offer engineers a flexible and cost-effective solution for EMI measurements. Their expandable features support optimized and secured investments, as additional options can be integrated at any time as needed. Depending on the configuration, these receivers can be used for measurements during the development phase, certification preparation and final testing to ensure compliance with latest EMI standards.

14-Dec-2023 | Press Releases | Mobile network testing

First FCC-certified 5G-connected drone-in-a-box solution ushers in benefits of turnkey, operationally efficient, environmentally sustainable technology for U.S. industrial and public sectors. Collaboration utilizes R&S CMX500 radio communication tester from Rohde & Schwarz to proof standards compliance and reliability for mission-critical and business use cases.

24-Apr-2024 | Press Releases | Automotive

Rohde & Schwarz has teamed up with IPG Automotive, a pioneer in virtual test driving, to redefine automotive radar Hardware-in-the-Loop (HIL) integration testing and thereby reducing the cost by bringing Autonomous Driving (AD) testing from the proving ground to the development lab. Combining the CarMaker simulation software from IPG Automotive with the R&S AREG800A radar object simulator and the R&S QAT100 advanced antenna array provides vehicle manufacturers with the ability to simulate ADAS/AD scenarios like those defined in the Euro NCAP in a controlled, safe, time-efficient and cost-reducing way. This combination provides automotive OEMs and radar sensor suppliers with a comprehensive radar sensor testing platform. It is applicable for validation and real-time, closed-loop characterization of radar sensors and enables compliance with Association for ASAM standards.

05-Sep-2023 | Press Releases | Wireless communications

Reconfigurable intelligent surfaces (RIS) are drawing attention in the wireless industry due to their potential for an efficient 5G mmWave rollout as well as future 6G applications. A measurement campaign by Rohde & Schwarz and Greenerwave recently characterized the configurable radio wave reflection properties of a novel FR2 RIS module developed by Greenerwave with an over-the-air (OTA) antenna test system from Rohde & Schwarz. It is one of the first real measurements confirming that a metamaterial-based RIS can improve the coverage and efficiency of wireless communications performance, especially for 5G FR2. The groundbreaking work will pave the way for further 6G developments.

19-Sep-2024 | Press Releases | 6G

With the proof-of-concept for a system for 6G wireless data transmission based on a photonic THz communications link, Rohde & Schwarz is showcasing its contribution to state-of-the-art research for next generation wireless technologies at European Microwave Week in Paris. The ultra-stable, tunable THz system, developed within the 6G-ADLANTIK project, is based on frequency comb technology and enables carrier frequencies well beyond 500 GHz.

23-May-2023 | Press Releases | Test & measurement

The R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.

06-Jun-2024 | Press Releases | Wireless communications

The United States Department of Commerce will provide funding to promote the deployment of open networks in the U.S. and abroad. Rohde & Schwarz and VIAVI offer joint test solutions to meet the needs of radio equipment manufacturers who plan to apply for the funding.

14-Jan-2025 | Press Releases | EMC testing

Higher field strengths for critical test environments up to 18 GHz

30-Oct-2025 | Press Releases | Wireless communications

Industry leaders collaborate on TC-DFT-s-OFDM waveform testing to advance next-generation wireless technology development.

03-Nov-2025 | Press Releases | Wireless communications

AI-powered receiver technology using machine learning can greatly enhance future 6G coverage, creating cost savings and accelerating time to market. The AI technology identifies and compensates for distortion in wireless signals, leading to substantial improvements in 6G uplink coverage. Nokia and Rohde & Schwarz will demonstrate the technology at the Brooklyn 6G Summit from November 5-7.

10-Oct-2024 | Press Releases | Automotive

Rohde & Schwarz, in collaboration with wireless communications engineering experts IMST GmbH, has developed a patented antenna digital twin solution, effectively addressing a multitude of challenges and delivering considerable benefits for vehicle manufacturers and their suppliers to optimize automotive connectivity. The solution combines measurements of the antenna characteristics with simulation of the electromagnetic wave propagation to optimize the antennas’ design and their position to ensure for example optimal WiFi coverage inside the vehicle.

14-Aug-2025 | Press Releases | Test & measurement

The Netherland’s charming tech hub, Utrecht, is hosting this year’s European Microwave Week (EuMW), bringing together leading experts in microwave, RF, wireless and radar technology. A key highlight of the exhibition will be the game-changing FSWX signal and spectrum analyzer from Rohde & Schwarz: Featuring a novel architecture, the FSWX enables completely new measurement scenarios in RF system testing. Visitors can see it in action in multiple applications at the company’s booth, where it will address the evolving testing needs of various industries. Additionally, Rohde & Schwarz is showcasing updates to its tried and tested R&S FSWP phase noise analyzer, alongside the latest R&S ZNB3000 vector network analyzer and other cutting-edge product innovations.

17-Jun-2025 | Press Releases | Test & measurement

Rohde & Schwarz has updated the R&S FSWP for upcoming applications. The new option R&S FSWP-B56G extends the frequency range up to 56 GHz. With the support of external high-end sources as local oscillators it combines the advantage of an easy-to-use signal source analyzer and a high-end phase noise tester. For additive and residual phase noise measurements on amplifiers Rohde & Schwarz has extended the frequency range of the internal signal source up to 54 GHz. In addition, a new and very easy method for noise figure measurements has been added.

19-Feb-2025 | Press Releases | Test & measurement

Kyocera has developed an innovative mmWave phased array antenna module (PAAM) that simultaneously creates multiple beams in different directions at different frequencies. These PAAMs will be used in 5G FR2 infrastructure installations, enabling for example site co-location of different operators running networks on different frequency bands. To ensure optimal beam steering and beam directivity of their groundbreaking product, Kyocera relies on CATR-based multi-reflector OTA testing technology from Rohde & Schwarz.

19-Sep-2023 | Press Releases | Security

Fraport began testing the world’s first walk-through security scanner for passengers at Frankfurt Airport. The R&S QPS Walk2000 from Rohde & Schwarz is designed to speed up security checks. The first of these scanners is currently in use in Concourse A of Terminal 1. Passengers simply walk through the scanner at a normal pace without stopping. The test and evaluation phase is set to last up to six months and will provide Fraport and Rohde & Schwarz with important information to help optimize the system.

25-Aug-2025 | Press Releases | EMC testing

The new BBA series features higher field strengths for critical test environments up to 18 GHz

10-Nov-2025 | Press Releases | SATCOM

Rohde & Schwarz will present its latest test and measurement solutions for the satellite industry at Space Tech Expo 2025. The company provides expertise and tailored tools to help satellite manufacturers and operators ensure optimal system performance and compliance with evolving industry standards. At the expo, Rohde & Schwarz will showcase solutions designed to streamline satellite testing and ensure performance by identifying potential issues before launch.

13-Jan-2025 | Press Releases | Security Scanner

dormakaba, a global leader in the access solutions market, and technology company Rohde & Schwarz are expanding their partnership from the airport business area to the critical infrastructure sector. Both partners have developed a new innovative solution for people screening that will be presented at the BAU 2025 trade fair in Munich. The automated access solution simplifies necessary security checks and increases capacity and efficiency. The global pilot projects to test the system have been expanded and are currently taking place in the USA, Singapore, and the Netherlands. Trial operations at Munich Airport are also expected to begin in January 2025.

25-Feb-2025 | Press Releases | Non-terrestrial networks (NTN)

Murata and Rohde & Schwarz have developed the world's first Voice over Narrowband Non-Terrestrial Network (NB-NTN) testbed. To be presented at Mobile World Congress 2025 in Barcelona, this innovative demonstration marks a significant leap in 3GPP based satellite connectivity. The resulting push-to-talk like application will enhance safety and communication capabilities in areas without terrestrial network access.

17-Jul-2024 | Press Releases | Electronic design

Rohde & Schwarz further strengthens its oscilloscope portfolio by introducing the industry’s first ASIC-based zone triggering. With this new approach, the MXO series can offer the world’s fastest zone trigger update rate of up to 600 000 waveforms per second and less than 1.45 us blind time between trigger events. It is up to 10 000 faster than competitive zone triggering offerings. Thanks to the new ASIC-based zone triggering, MXO oscilloscopes can precisely isolate events where traditional triggering does not provide the needed flexibility.

10-Jul-2024 | Press Releases | Security Scanner

Trials of two digital security scanners produced by German manufacturer Rohde & Schwarz have begun at Zurich Airport. The long-term plan is to equip all security checkpoints at the airport with the new technology.

07-Jun-2023 | Press Releases | Test & measurement

For precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specifications, Rohde & Schwarz is developing a new R&S ZNrun vector network analyzer automation suite option. For a fully automated verification of a PCIe x8 cable, for instance, the software controls a setup with R&S ZNB vector network analyzer plus scalable R&S OSP switch matrix configuration, creating a multiport VNA solution with 64 test ports. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs with all Thru and all crosstalk combinations plus corresponding metric calculations for Pass/Fail evaluations. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.

30-Jan-2025 | Press Releases | MWC 2025

Always at the forefront of technological innovation, Rohde & Schwarz is shaping the future of the mobile industry with its extensive range of test and measurement and technology solutions. At MWC Barcelona 2025, the wireless communications expert will present a diverse portfolio themed “Enabling Connections, Empowering Innovations” aimed at assisting industry leaders and visionaries turn their ideas for new mobile technologies, products, and applications into reality.

04-Sep-2025 | Press Releases | Broadcast and Media

Tech Talks, Business Talks, and Live Experience Sessions spotlight the future of broadcast

13-Feb-2025 | Press Releases | Test & measurement

Embedded systems form the core of modern electronic devices, spanning power input stages, main control PCBs, motors, motor controls, sensors and user interfaces. Each functional block requires comprehensive testing to ensure optimal performance, reliability, and a fast market release of the final product. With its extensive portfolio of advanced test solutions, Rohde & Schwarz empowers design engineers to tackle the emerging challenges in all embedded systems: From energy efficiency and electromagnetic interference to digital design and connectivity.

13-Jun-2025 | Press Releases | Test & measurement

Rohde & Schwarz is set to revolutionize the field of signal and spectrum analysis with the launch of the FSWX signal and spectrum analyzer, an innovative instrument designed to overcome the limitations of current measurement methods. Featuring a groundbreaking architecture that integrates multiple input ports with advanced cross-correlation techniques, the FSWX enables entirely new measurement scenarios in RF system testing. Tailored for mobile communications, wireless, and satellite applications, it meets the growing demand for higher data rates, wider modulation bandwidths, and increased modulation orders – areas where traditional signal analyzers often struggle. The FSWX will make its debut at IMS2025 in San Francisco, marking a significant advancement in the industry.

12-Sep-2024 | Press Releases | EMC testing

Rohde & Schwarz will provide a turnkey electromagnetic compatibility (EMC) test system and support for an Electromagnetic Environmental Effects (E3) capability at the Hanwha Armoured vehicle Centre of Excellence (H-ACE) in Geelong.