Ricerca documenti e articoli

Describes all instrument functions and remote control commands, including measurement and programming examples, for the base unit.

English - 27 ago 2019

English - 28 giu 2018

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 dic 2017

Provides the information required to prepare the instrument for use and start working.

English - 4 mag 2017

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

English - 26 mag 2020

Italian - 16 ott 2017

English - 12 nov 2025

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 27 ago 2019

Rapid and accurate verification of beamforming weights is required for example, for codebook generation or beamforming algorithm development or verification. This document describes the unique application of Rohde & Schwarz VNA (Vector Network Analyzers) to fully characterize the passive part of multi-element antennas intended for beamforming.A range of R&S VNA models are optionally equipped with multiple independent sources, whose relative amplitude and phase may be arbitrarily controlled ("defined coherence mode"), in addition to frequency and true time delay. These sources may be connected to individual elements of a multi-element antenna to derive and verify transmit (Tx) mode beamsteering and beamforming operation.The R&S®ZVA in "Defined Coherence Mode" can electronically be switched to / from the conventional S-parameter mode. Therefore, Sparameter and beamforming measurements may be performed efficiently within a single connection cycle of the antenna.Multiple VNA may be daisy-chained, to extend the concept shown to support an arbitrary number of ports.The R&S®Quickstep sequencing software may be downloaded from:https://www.rohde-schwarz.com/software/quickstep/

English - 20 mar 2017

Current Radar development is focusing the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system, performing radar detection by means of pulse compression and digital signal processing. Appropriate Rohde & Schwarz sofware tools for such applications are described as well as the interface between the tools and the test instruments. Target reader group are engineering students who want to perform tests using pulsed or chirped signals.

English - 20 nov 2014

More and more everyday items such as household appliances, vehicles, lights, etc. are now connected to the Internet, forming what is known as the "Internet of Things". Even clothing with sewn-in sensors to measure vital functions can now connect to the Internet and transmit data to cloud services. These different things use a variety of wireless technology standards to establish a connection. Due to its popularity, one of the most important standards is Bluetooth (or Bluetooth Low Energy). Before a new product with Bluetooth functionality can be launched, the qualification process defined by the Bluetooth SIG must be successfully completed. To save time and money, performance tests need to be performed in the development stage. This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5. As an alternative solution, we also cover how to perform almost all of the measurements with a spectrum analyzer and signal generator.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license.

English - 19 giu 2017

This application note provides a guide through the measurements for IEEE 802.11ac WLAN transmitter signals using the general purpose OFDM analysis software R&S FS-K96. Step-by-step instructions for performing the measurements are provided and the different result types available with the FSK96 Software are discussed.

English - 21 set 2011

This application note explains how to convert different Rohde & Schwarz I/Q file formats among each other using the supplied software tool.

English - 23 set 2015

Multiple Input Multiple Output (MIMO) is an integral part of LTE. Vector signal generators and signal & spectrum analyzers from Rohde & Schwarz support LTE measurements with up to 4 antennas. This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.

English - 9 ott 2014

Starting from June 2017, almost all radio transmitters and receivers sold or put into operation in the European Union have to be tested for immunity against interferers in adjacent frequency bands. ETSI standard EN 303 340 defines the tests to be performed on digital television receivers and requirements to be passed.This application note describes the test procedures and provides save-recall files and interferer signals for the Broadcast Test Center R&S®BTC.

English - 11 lug 2017

3GPP TS25.141 defines conformance tests for W-CDMA base stations (including HSPA+ features). This application note describes how transmitter (Tx) tests (TS25.141 Chapter 6) can be performed quickly and easily by using signal and spectrum analyzers from Rohde & Schwarz. A few tests additionally require vector signal generators from Rohde & Schwarz. Example illustrates manual operation. A free software program enables and demonstrates remote operation. The W-CDMA base station receiver (Rx) tests (TS25.141 Chapter 7) are described in Application Note 1MA114.

English - 21 ott 2014

This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results. Further it concentrates on generating the configuration file for R&S FSQ-K96, the appropriate IQ data files for Signal Analyzer R&S FSQ and waveform files for R&S Signal Generators. With this description the user obtains a complete R&S test solution for signal generation and analysis of generic OFDM signals.

English - 17 ott 2008

3GPP TS25.141 defines conformance tests for W-CDMA base stations (including HSPA+ features). This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz. One test additionally requires a spectrum analyzer from Rohde & Schwarz.Example illustrates manual operation. A free software program enables and demonstrates remote operation. The W-CDMA base station transmitter (Tx) tests (TS25.141 Chapter 6) are described in Application Note 1MA67.

English - 21 ott 2014

FSxRecordPlay is a program for recording the trace data in frequency and time domain from Rohde & Schwarz spectrum analyzers and measurement receivers via IEEE bus, LAN/Internet or internal remote control connection. The stream waveform data can be played back and analyzed directly in this software with variable speed.

English - 19 mag 2010

This application note explains how to bring a CADENCE system which is attached to an R&S EX-IQ-BOX into service for the first time. The first part of the document shows how to setup an LTE Demo without using a UE design. This setup uses the R&S CMW500 as the downlink transmitter. The emulator receives the downlink via an R&S EX-IQBOX and passes it to an R&S spectrum analyzer (R&S FSx) via a second R&S EXIQ-BOX. The second part describes the real wiring using up- and downlink. This will only work if a UE design is available on the emulator.

English - 30 giu 2011

This white paper provides a brief technology introduction on the 802.11ac amendment to the successful 802.11-2007 standard. 802.11ac provides mechanisms to increase throughput and user experience of existing WLAN and will build on 802.11n-2009.

English - 23 mag 2012

Active, high-impedance probes can be connected to spectrum analyzers, providing a practical and highly precise measurement solution to overcome an otherwise cumbersome RF testing issue. This application note provides information on how to use oscilloscope probes in RF measurements using spectrum analyzers.

English - 4 lug 2023

The Universal Radio Communication Tester R&S®CMU200 can perform most of the CDMA2000 1xEV-DO access terminal (AT) tests specified in the standard IS-866-A on its own. Some tests require additional instruments. This application note shows how to perform these tests easily with the remote-control software CMUgo, using the R&S®CMU200 in combination with R&S®SMU, R&S®AMU, R&S®SMJ or R&S®SML signal generators, and R&S®FSQ, R&S®FSU, R&S®FSP, R&S®FSL or R&S®FSMR spectrum analyzers.

English - 5 gen 2012

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 27 ago 2019