Ricerca documenti e articoli

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 14 apr 2026

With continuously increasing data rates, signal integrity in high speed digital designs becomes more and more demanding

English - 8 lug 2022

Provides information on security issues when working with R&S®ZNB3000 in secure areas.

English - 1 dic 2025

Describes the health and utilization monitoring service (HUMS).

English - 5 set 2025

Italian - 15 apr 2026

As DisplayPort evolves to support ultra-high resolutions and increased data rates, robust compliance testing is essential to ensure interoperability across devices and interconnects. This application note provides a structured overview of physical-layer testing for DisplayPort source transmitters and passive cables, aligned with VESA CTS v2.1. The note covers key test procedures using Rohde & Schwarz solutions, including oscilloscope-based measurement at standardized test points, automated test execution with ScopeSuite, and signal integrity debug via equalization and jitter decomposition. It further details cable characterization using mixed-mode S-parameter analysis on a Vector Network Analyzer (VNA), with support for simulated eye diagrams and TDR-based impedance diagnostics. Practical setup examples and product references are provided to help engineers perform repeatable, standards-compliant DisplayPort PHY validation.

English - 16 lug 2025

Over the past few years, electronics developers have developed a variety of approaches to avoid interference on high-speed signals on printed circuit boards. However, with increasing complexity and frequency, PCBs set new limits, supporting frequencies of 40 GHz and higher. Driven by the fast growing 5G market, today’s digital systems operate in these high frequency ranges that come with completely new challenges. With slope steepness’s of just a few picoseconds, any discontinuity in the impedance and impairment of the inductance or capacitance on the PCB or back drill defects on the PCB can have a massive impact on the signal quality. The industry recognizes that there is a growing need for functional high-speed testing of PCBs. The MicroCraft® E2V6151 series combined with an R&S®ZNB vector signal analyzer delivers a fully automated solution.

English - 25 mar 2020

For measurements of non-connectorized devices, test fixtures, probes or other structures are used to adapt from the coaxial interface of the test setup to the device under test (DUT). For accurate measurements of the DUT, these lead-ins and lead-outs need to be characterized, so that their effects can be mathematically removed, i.e. de-embedded from the measurement results.This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND. As de-embedding is also essential in other test equipment like oscilloscopes, etc., this guide also describes, how lead-ins and lead-outs can be accurately characterized with a VNA and then exported as an S-Parameter file to be used by other test instruments.

English - 19 set 2022

English - 23 lug 2025

With continuously increasing data rates, signal inte grity aspects of high-speed digital designs and the components used become more and more challenging. Particularly at higher data rates, vector network analyzers (VNA) are increasingly replacing traditional time domain reflectometry (TDR) setups for testing passive components such as connectors, cables and PCBs. Users benefit from the higher accuracy, speed and ESD robustness of the VNA, making the VNA the instrument of choice in this field.

English - 20 set 2016

Provides the information required to prepare the instrument for use and start working.

English - 14 apr 2026

Filter tuning has never been easier and faster. SynMatrix advanced computer-aided tuning enables real time filter optimization in an easy guided process using the R&S®ZNB, R&S®ZND and R&S®ZNL vector network analyzer from Rohde & Schwarz. The SynMatrix solution provides a feature-rich GUI for R&D and lab use, as well as a simplified version for production applications.

English - 2 mag 2024

The R&S®ZNB vector network analyzer is easy to configure and calibrate using the built-in intermodulation wizard.

English - 19 dic 2013

English - 15 apr 2026

The R&S®ZNB vector network analyzer simplifies instrument configuration and calibration using the mixer measurement wizard and SMARTerCal.

English - 1 ott 2013

CST® Filter Designer 3D, which is part of the CST Studio Suite® simulation software from Dassault Systèmes, is a complete synthesis tool for filters and diplexers. It provides a range of solutions throughout the design process of coupled resonator filters and even beyond with its VNA based tuning capability. CST Filter Designer 3D assists in tuning filter hardware, significantly reducing the time for optimizing a device to meet the expected specifications. An attractive instrument to obtain fast data reading for realtime filter tuning is the R&S®ZNB vector network analyzer from Rohde & Schwarz.

English - 27 nov 2019

Italian - 23 lug 2025

Ensures compliance of IEEE 802.3bj/by/cd/ck/df/dj cables with fast automation and easy testing

English - 5 ott 2025

The R&S®ZNB vector network analyzer together with the R&S®HF907 double-ridged waveguide horn antenna provides fast and accurate TD SVSWR measurements in line with ANSI C63.25.

English - 6 ago 2018

English - 22 dic 2025

10BASE-T1S Ethernet enables the integration of diverse sensors into an automotive-Ethernet vehicle supply system, for example short-range radar sensors for detecting blind spots or ultrasonic sensors for the parking assistant. For reliable operation of the functions, data transmission over 10BASE‑T1S Ethernet must be assured at all times and in every climatic environment. Functionality must be tested during development and in production. Only 10BASE-T1S Ethernet interfaces that have passed compliance testing in line with IEEE 802.3cg can be deployed in vehicles. Consequently, vehicle manufacturers and their suppliers need measuring equipment that allows them to perform these tests quickly and reliably.

English - 15 mag 2020

Powerful tool for Rohde & Schwarz vector network analyzers (VNA) to simplify automated setup for complex measurements in R&D, verification and production labs

English - 24 mar 2025