Ricerca documenti e articoli

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 dic 2017

English - 28 giu 2018

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

English - 26 mag 2020

The R&S® Broadcast Test Center BTC supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC.

English - 27 mar 2018

Starting from June 2017, almost all radio transmitters and receivers sold or put into operation in the European Union have to be tested for immunity against interferers in adjacent frequency bands. ETSI standard EN 303 340 defines the tests to be performed on digital television receivers and requirements to be passed.This application note describes the test procedures and provides save-recall files and interferer signals for the Broadcast Test Center R&S®BTC.

English - 11 lug 2017

Receiver diversity improves reception quality by using multiple antennas with a preferably low correlation factor between each receive path. The result is a much more robust reception, since a deep fade will not affect all received signals at the same time.However, the complex geometry and positioning constraints for antennas of the receiving devices can introduce an unwanted correlation between channels. The popular diversity test setup consisting of several independent transmitters does not serve the needs of a realistic simulation, because radio channel correlation is not simulated.This application note explains a compact and versatile MIMO test solution for any common broadcast standard with real time fading including the simulation of channel correlation for a 1x4 MIMO system.The test setup allows very precisely specified individual multipath profiles.

English - 11 ott 2017

Since June 2017 almost all radio transmitters and receivers sold or put into operation in the European Union have to be tested for immunity against interferers in adjacent frequency bands. ETSI standard EN 303 345 defines the tests to be performed on broadcast sound receivers, and the requirements to be passed.This application note describes the test procedures and provides script files and interferer signals for the Broadcast Test Center R&S®BTC.

English - 29 mag 2020

The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band. The AN includes detailed description of measurement setups, DVB-S2 and DVB-S2X signal generation, up-conversion and signal quality (Error Vector Magnitude and Modulation Error Ratio) analysis in the Ku & Ka-band using Rohde & Schwarz instruments.This paper is intended towards satellite equipment manufacturers, network operators, government & authorities, CE receiver chip set manufacturers, car manufacturer and automotive infotainment system manufactures.

English - 8 mar 2016

Frequency allocation plans are under discussion in the US and Europe to open the lower C band for 5G applications. This portion of the spectrum provides 5G with more bandwidth than conventional lower mobile frequency bands and is contiguous while the C band is actually in use for satellite downlinks to satellite earth stations (SES).

English - 18 mar 2019

Italian - 24 ago 2026

What used to be the car radio has evolved from adding a cassette player to state of the art entertainment on the move. All this while keeping driver & passengers connected. The design challenge is to bring all the communication and broadcast standards into a small form factor that fits in the dashboard of the car. The RF modules need to support multiple standards in a single assembly and multiple modules are placed next to each other. The frequencies defined by the RF standards are in very close proximity and hence need to co-exist with each other. Moreover, the antennas inside the car are subjected to cross-coupling effects with mobile devices of passengers. To ensure the RF performance of the infotainment system, all of these scenarios need to be thoroughly tested.This application note highlights some of the RF measurement challenges and introduces Rohde & Schwarz equipment required for relevant RF characterization of car infotainment devices.

English - 8 mag 2017

Provides the information required to prepare the instrument for use and start working.

English - 7 giu 2018

Italian - 15 lug 2016

Italian - 20 ago 2019

Automotive Infotainment Testing

English - 19 feb 2018

Nearly all analog NTSC broadcasting has ended in the US, Canada and South Korea. The digital switchover to ATSC in Mexico is expected to be completed by the end of 2016. ATSC receivers must fulfill the recommendations described in “ATSC Recommended Practice: Receiver Performance Guidelines” (document A/74:2010) before they can be sold freely in the markets that have adopted the standard. In addition, Recommendation ITU-R BT.2036-1 (07/2016), titled “Characteristics of a reference receiving system for frequency planning of digital terrestrial television systems”, includes the planning factors for an ATSC reception system, with a reference to ATSC Recommended Practice A/74:2010, because operation is in a more dynamic environment.

English - 29 set 2016

Automotive Infotainment Testing

English - 19 feb 2018