1101 결과
Machine learning use cases like network utilization rating and call stability score extract insights from network data analytics enabling network optimization
Feb 28, 2024 | AN-번호 8NT10
Part 1 of the Cable and Antenna verification series – essential for Mobile Networks
Return loss and decoupling measurements on antenna systems executed by a cable and antenna tester are crucial for proper operation of mobile networks
Feb 23, 2024 | AN-번호 8NT11
MXO 오실로스코프의 고속 푸리에 변환(Fast-FFT)을 이용한 EMI 디버깅
2월 07, 2024
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
Jan 31, 2024 | AN-번호 1SL410
EVM Measurements for ZigBee signals in the 2.4 GHz band
Dec 12, 2014 | AN-번호 1EF55
Testing radomes, bumpers, QAR50 설계부터 양산까지 모든 단계에서 가능한 레이돔 및 범퍼 테스트 Testing radomes, bumpers, QAR50 설계부터 양산까지 모든 단계에서 가능한 레이돔 및 범퍼 테스트 Testing radomes, bumpers, QAR50 관련 상품
4월 21, 2022
ATSC 수신기는 해당 표준을 채택한 시장에 출시되기 전에 ATSC 수신기 성능 지침을 충족해야 합니다.
9월 29, 2016 | AN-번호 1GP111
R&S®RTx-K36 Frequency Response Analysis(Bode plot) 옵션은 저주파 네트워크 분석기 또는 전용 주파수 분석기를 대체할 수 있는 경제적인 보급형 제품입니다.
12월 31, 2018
이 애플리케이션 노트는 저노이즈 증폭기 앞에서 고손실 감쇠기와 같이 손실이 많이 기기에서 FSW-K30을 이용해 노이즈 지수를 측정하는 방법에 대해 설명합니다.
6월 24, 2020 | AN-번호 1EF110
.빠른 빔포밍 검증은 빔포밍 안테나의 R&D 기간을 단축하고 제품 성능을 개선해 줍니다.
7월 07, 2020
R&S MATLAB<sup>®</sup> Toolkit for R&S<sup>®</sup> NRP-Z Sensors
Mar 05, 2011 | AN-번호 1GP61
Phase Noise Profile Creator V. 1.2 for the R&S<sup>®</sup>SFU
8월 22, 2007 | AN-번호 7BM63
R&S®RTP의 디지털 트리거에 존 트리거를 결합할 경우 DDR 메모리 인터페이스 측정 시 유연하고 다양한 목적의 트리거링 기능을 제공할 수 있습니다.
9월 26, 2018
고효율 자동화 솔루션
이 애플리케이션 노트에서는 R&S 신호 발생기, 신호 및 스펙트럼 분석기, 벡터 신호 탐색기 소프트웨어, 파워 미터, 전원공급장치를 사용하여 5G UE PA 테스트를 자동화하는 예를 소개합니다.
8월 09, 2021 | AN-번호 1SL365
R&S®CMX500 Radio Communication Tester는 모바일 기기의 VoNR 및 VoLTE 음성 품질과 성능을 분석하기 위한 최적의 솔루션입니다.
2월 21, 2023
이 애플리케이션 노트는 CMWrun 및 CMW500과 RT-ZVC를 이용한 배터리 사용 시간 테스트를 예제 애플리케이션과 함께 설명합니다.
2월 17, 2017 | AN-번호 1MA281
본 문서는 WLAN 송신기의 핵심 성능 파라미터 중 하나인 EVM(Error Vector Magnitude)의 측정을 최적화하는 방법, 그리고 이에 관련된 기술적 배경과 지침을 소개합니다.
이 애플리케이션 노트는 802.11be WLAN 송신기의 핵심 성능 파라미터 중 하나의 측정을 최적화하는 방법, 그리고 이에 관련된 기술적 배경을 소개합니다.
9월 06, 2022 | AN-번호 1EF114
전력 분배 네트워크의 요구사항이 증가하면서 DC 레일의 크기가 작아지고 클린 파워가 집적회로의 핀까지 확실히 도달하는 레일이 확산되었습니다.
3월 07, 2017
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
11월 12, 2014 | AN-번호 1MA208
PESQ<sup>®</sup> Measurement for CDMA2000<sup>®</sup> with R&S<sup>®</sup>CMUgo
1월 05, 2012 | AN-번호 1MA136
R&S<sup>®</sup>CMW500 Digital IQ with CADENCE Emulator
Jun 30, 2011 | AN-번호 1CM75