The terrestrial television standard DVB T2 is gaining in significance as a result of the growing scarcity of available frequencies. New systems are being tested in many countries around the world. Other countries have already completed the introductory phase for DVB T2. Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers or even disrupt adjacent channels.A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.The measurements described here satisfy many country-specific and customer-specific test specifications. Users need only set the limit values accordingly.

23-Jul-2014 | AN-No. 7BM106

This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.

03-Sep-2014 | AN-No. 1MA166

Tamper protection for monitoring networks in banks

07-Jul-2014

Transient Measurements on GSM/PCN Synthesizers

03-Jun-1998 | AN-No. 1EF08

Current radar development is focusing on the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system.

20-Nov-2014 | AN-No. 1MA234

The R&S®LCX LCR meter is ideal for measuring these dependencies.

17-Mar-2022

An automated test solution based on the R&S®CMW wideband radio communication tester fully supports the new test cases for real-time submeter positioning.

10-Jun-2022

R&S CMW - IP throughput testing

14-Mar-2016

Importance of deep memory in digital oscilloscopes - Rohde & Schwarz oscilloscopes offer industry-leading memory depth.

21-Mar-2017

Tolerance to Noise Tests for DTV Receivers

26-Jan-2007 | AN-No. 7BM64

This paper describes the measurement of additive/residual phase noise of power amplifiers or multipliers for example for automotive RADAR sensors at 80 GHz using the interferometric measurement approach in combination with a phase noise and VCO tester R&S FSWP. The setup provides a way to characterize the additive/residual phase noise of amplifiers down to -150 dBc/Hz at 100 kHz offset even in the microwave range at 80 GHz.

11-Sep-2024 | AN-No. 1EF117

The R&S ® TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface.

16-Mar-2017 | AN-No. 1GP113

R&S CMWrun Sequencer Software Tool

20-Feb-2015

AMIQ-K2 - Program for Transferring Various I/Q Formated Data to AMIQ

24-Nov-1999 | AN-No. 1MA10

R&S IMS Hardware Setup according IEC / EN 61000-4-6 (conducted immunity)

29-Mar-2007 | AN-No. 1SP31

Power Measurement and Power Calculation of IEEE 802.16 WiMAX OFDMA signals

11-Jul-2007 | AN-No. 1EF60

Spurious Emission Measurement on 3GPP Base Station Transmitters

10-Jan-2002 | AN-No. 1EF45

Antenna Measurements, RCS Measurements and Measurements on Pulsed Signals with Vector Network Analyzers R&S ZVM, R&S ZVK

10-Sep-2004 | AN-No. 1EZ52

LTE-A Base Station Receiver Tests

11-May-2016 | AN-No. 1MA195

Use the R&S®ZVA vector network analyzer and R&S®BBA150 broadband amplifier for accurate and reproducible results in minimum test time.

27-Sep-2013

Measurements on AMPS phones with the R&S CMU200 and CMUgo

07-Sep-2004 | AN-No. 1CM53

WiMAX Power Amplifier Testing

03-Aug-2007 | AN-No. RAC-0611-0025

Phase Jitter in DTV Signals

16-May-2002 | AN-No. 7BM30

Common mode distortion of wide-bandgap power electronics probing

25-Nov-2024

An offline AC/DC switching converter has no separate bias power supply that provides power to the control integrated circuit itself. Here, an auxiliary primary winding and discrete components are added to supply power to the control circuit. Verifying this circuitry is essential and requires accurate and detailed signal level and timing measurements. The startup sequence takes a long time, which needs to be taken into consideration in the measurement and requires an instrument with sufficient memory.

23-Nov-2022

Synchronous Node B Testing with R&S CMU300

10-Nov-2005 | AN-No. 1CM58

This application note describes a test scenario tor cable components with an R&S®CLGD Cable Load Generator and an R&S®FSW Signal & Spectrum Analyzer.

24-Jan-2017 | AN-No. 1MA285

Remote Emulation with the R&S SMBV100B Signal Generator

30-Sep-2019 | AN-No. 1GP121

Accessing Measurement Data and Controlling the Vector Network Analyzer via DDE

31-Jul-1998 | AN-No. 1EZ33

Measurements on CD Players using the Audio Analyzers UPL or UPD and the Audio Test Disc UPA-CD

16-Feb-1998 | AN-No. 1GA21