17 Results
EW receivers are tested in the lab at RF to discover problems before flight testing. This eliminates cost and schedule risk. Flight testing can cost tens of thousands of dollars per hour and must be scheduled many months in advance. In contrast, using test equipment to test at RF might require a certain upfront cost but provides a readily-accessible capability to simulate radar threats at RF for a long time. This application note explains how the angle-of-arrival (AoA) capabilities of EW receivers can be tested with commercial off-the-shelf (COTS) RF test equipment. Topics covered are the generation of scenarios, instrument setup, and setup calibration. We will use a radar warning receiver (RWR) as a proxy for a generic EW receiver in this application note.
22-Dec-2021 | AN-No. 1GP125
The present R&S®SMW-K503/-K504 Interface Control Document contains information on- the R&S descriptor word format, including pulse descriptor words and timed control descriptor words in basic and expert mode- Timing requirements and limitations of the real-time control interface- Properties of the ADV DATA/CTRL network interfaceIt is intended for use by customers using descriptor words to control the R&S®SMW200A in real-time. The interface control document specifies the interface between the customers hardware used for provision of descriptor words and the R&S®SMW200A ADV DATA/CTRL interface. Additional information on descriptor word processing inside the R&S®SMW200A is provided.
25-Aug-2021 | AN-No. 1GP133
EW receiver mission data files can contain hundreds of emitters with thousands of modes and beams that must be tested by simulation at RF. Often, these emitters, their modes and beams are listed on intelligence databases and must be imported from a spreadsheet into to an emitter simulation application such as the R&S®Pulse Sequencer software. For this purpose, the R&S®Pulse Sequencer software offers an internal script editor which allows to import user data and automatically generate emitter, sequence or platform configurations that can then immediately be played into RF without any additional software. Furthermore, the R&S®Pulse Sequencer offers a SCPI recorder tool to collect manual entries during scenario data creation into a list of corresponding SCPI commands. This list of commands can easily be used to create user defined scripts that can either run in the internal script editor or an external software (e.g. Matlab, Python).
01-Jul-2021 | AN-No. 1GP131
This application note belongs to a series of application notes which explains how to test EW receivers at RF in the lab with commercial, off-the-shelf signal generators and software. The series will cover all relevant use cases. This application note will discuss threat simulation and verification. Further application notes will address calibration and verification of multi-channel setups for simulation of angle of arrival, generation of radar signals in a hardware in the loop (HIL) environment with PDW Streaming, and automated threat creation and sequencing.
23-Mar-2021 | AN-No. 1GP123
Development of modern EW systems is a complex and expensive process, that requires thorough testing against all requirements during all phases of development. To keep cost under control, system level testing in the lab is key and brings several advantages: test cases can be reproduced under the exact same conditions as often as necessary. System level testing in the lab is often performed in a hardware-in-the-loop (HIL) environment. This application note provides some insight into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. An introduction to HIL testing and realtime operation of the R&S®SMW200A is given. The hardware and software interface, the PDW format and synchronization and timing mechanisms are described. Additionally, various example scenarios and detailed information about intermediate calculations are provided. The application note also provides information about system requirements for advanced PDW streaming with multiple emitters on multiple parallel streams.
22-Jan-2021 | AN-No. 1GP124
Testing radar warning equipment in realistic scenarios is crucial to reliable field performance. This typically involved dedicated instruments or test systems. Commercial vector signal generators (VSG) such as the R&S®SMW200A from Rohde & Schwarz have become a very attractive alternative thanks to their increased available bandwidth and processing power.
13-Aug-2020
With the R&S®Pulse Sequencer radar simulation software, users can easily and intuitively create scenarios for simulation of angle of arrival (AoA). Together with multiple coupled R&S®SMW200A vector signal generators, this solution allows quick and thorough performance characterization of all types of direction finding equipment such as devices that use amplitude comparison, interferometric or time difference of arrival (TDOA) techniques. This document describes our test solution for testing devices that use amplitude comparison techniques.
02-Apr-2020
The R&S®Pulse Sequencer software together with the R&S®SMW200A vector signal generator offers a simple and easy way to simulate multi-emitter environments. It enables engineers to validate and verify the EW receiver performance.
13-Nov-2018
The R&S®Pulse Sequencer software offers an easy way to simulate moving radar emitters and a moving receiver for EW receiver tests. The software together with the R&S®SMW200A vector signal generator is a powerful radar simulator. It enables engineers to generate highly dynamic 3D scenarios in the lab.
18-Sep-2018
The R&S®Pulse Sequencer software offers an interface to import lists of pulse descriptor words (PDW). Users can define their specific PDW format in the software before importing the PDW list. The R&S®Pulse Sequencer software automatically uploads the interpreted PDW lists on the R&S®SMW200A to generate the most agile radar signals.
20-Feb-2018
The R&S®Pulse Sequencer software offers a powerful mechanism to model sequences that are often required for meaningful radar receiver test cases. The sequences can consist of many individual elements, such as pulses defined by the software or imported waveform segments. The software’s powerful interpulse modulation mechanism gives the user full control of each single element.
03-Oct-2017
The R&S®Pulse Sequencer software together with any Rohde & Schwarz vector signal generator offers an easy and convenient way to generate pulses. For the first time, one package helps you define all the test cases you need in the lab for your entire product development cycle. Test cases extend from simple pulse scenarios for initial component testing to complex 3D radar emitters for acceptance testing of complete systems.
27-Jul-2017
To simulate radar scenarios with frequency and level agility with high pulse density and long playtime, engineers can take advantage of the real-time sequencing capability of the R&S®SMW200A vector signal generator.
06-Jun-2017
Combining the R&S®Pulse Sequencer software with one of the vector signal generators from Rohde & Schwarz is the perfect solution for defining and playing pulses.
09-May-2017
The need to properly represent the ever changing complexities of the RF environment across communications, surveillance, electronic support measures (ESM) and signal intelligence system (SIGINT) with the advances of signal complexity and bandwidth, requires an enormous test and measurement effort.Extensive field tests are often applied to verify the performance and capabilities under preferably natural but controlled conditions. This is both costly and requires a great deal of time.RF signal environment generation using Test & Measurement equipment brings field tests into the laboratory, where a controlled, cost-effective and reproducible environment exists. The R&S®Pulse Sequencer software is a versatile tool to generate arbitrary and realistic RF signal scenarios ensuringsystem readiness for the real operational world.This application note introduces the R&S®Pulse Sequencer software, explains several examples that are applicable for research, development, before operational and during life-time test in detail, and guides you through the necessary steps, to generate a self-defined, arbitrary real life RF signal environment.
17-Jan-2017 | AN-No. 1MA288
SMW200A, SMZ90, Pulse Sequencer software, vector signal generator, frequency multiplier, Automotive radar sensors, Testing automotive radars Testing automotive radars against norm interferers; The R&S ® Pulse Sequencer software simulates arbitrary RF environments and supports the generation of radar norm interferers to test automotive radars operating in the 24 GHz, 77 GHz and 79 GHz frequency band
20-Oct-2016
The R&S®SMW200A signal generator together with the R&S®Pulse Sequencer software simplifies signal generation for multi-emitter environments.
24-Feb-2015