17 Results
Synchronous Node B Testing with R&S®CMU300
The R&S CMU300 combines high-precision Node B parameter tests with layer 1 signalling processes for the first time. Thus, you can now test Node Bs under more realistic conditions as it was possible with existing concepts. This document describes the new measurement functions and provides an overview of their applications.
Drivers for R&S®CMU300 Universal Radio Communication Tester
February 2004 How to use CMU 300 CVI drivers 2 Rohde & Schwarz RSCMUK3G driver Please use the CMU300 Base driver RSCMUNB driver For Node B please use the CMU200/CMU300 Base driver. LabWindows/CVI Application Examples The following set of application program examples is available for CMU 300. The examples are built on top of the CMU 300 instrument drivers.
AMR Testing on GSM Base Stations with R&S®CMU300
GSM Adaptive Multi-Rate (AMR) tests can be performed by using the R&S CMU300 as of software version V3.65. This document describes the scope of functions of the AMR Testing R&S CMU-K37 software expansion option.
GSM / EDGE Base Station Bit Error Rate Testing with R&S®CMU300
This Application Note provides an overview of the Bit Error Rate (BER) test capabilities of the Universal Radiocommunication Tester CMU300 on GSM / EDGE Base Stations. It includes information about measurement principles, the supported test environment and channels, CMU settings, operation, and ordering information.
Optimization of HSDPA networks with the Radio Communication Tester R&S®CMU300 and Coverage Measurement System R&S®ROMES
The Radio Communication Tester R&S CMU300 and Coverage Measurement System R&S ROMES provide a wide range of possibilities to check the HSDPA air interface and network quality. The measurement results that can be obtained with the aforementioned solutions ensure flawless operation of HSDPA services from the start and longstanding customer acceptance of the new technology.
Testing the Ericsson® Node B Typ RBS 3202® with R&S®CMU300 BTS Radio Communication Tester and NetHawk® RNC/Iub Simulator®
Testing the RF parameters of a WCDMA base station during the network rollout phase ensures subsequent trouble-free operation of networks as a basic prerequisite for general UMTS customer acceptance. This document describes a complete solution for testing the main transmission and reception parameters according to Specification 3GPP TS 25.141 FDD R99 on the basis of the R&S CMU300 Radio Communication Tester (RF measurements) and the NetHawk RNC/Iub Simulator (base station controller). The solution presented here is particularly recommended for installation measurements and regression tests on new UMTS system components.
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
This application note has been replaced by application note 1MA074 RSCommander.
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
RSCommander
Versatile Software Tool for Rohde & Schwarz InstrumentsRSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
